springboot 的配置_endpoints:dump:enabled:false

===================================================================

# COMMON SPRING BOOT PROPERTIES

#

# This sample file is provided as a guideline. Do NOT copy it in its

# entirety to your own application.               ^^^

# ===================================================================

 

 

# ----------------------------------------

# CORE PROPERTIES

# ----------------------------------------

 

# BANNER

banner.charset=UTF-8 # Banner file encoding.

banner.location=classpath:banner.txt # Banner file location.

banner.image.location=classpath:banner.gif # Banner image file location (jpg/png can also be used).

banner.image.width= # Width of the banner image in chars (default 76)

banner.image.height= # Height of the banner image in chars (default based on image height)

banner.image.margin= # Left hand image margin in chars (default 2)

banner.image.invert= # If images should be inverted for dark terminal themes (default false)

 

# LOGGING

logging.config= # Location of the logging configuration file. For instance `classpath:logback.xml` for Logback

logging.exception-conversion-word=%wEx # Conversion word used when logging exceptions.

logging.file= # Log file name. For instance `myapp.log`

logging.level.*= # Log levels severity mapping. For instance `logging.level.org.springframework=DEBUG`

logging.path= # Location of the log file. For instance `/var/log`

logging.pattern.console= # Appender pattern for output to the console. Only supported with the default logback setup.

logging.pattern.file= # Appender pattern for output to the file. Only supported with the default logback setup.

logging.pattern.level= # Appender pattern for log level (default %5p). Only supported with the default logback setup.

logging.register-shutdown-hook=false # Register a shutdown hook for the logging system when it is initialized.

 

# AOP

spring.aop.auto=true # Add @EnableAspectJAutoProxy.

spring.aop.proxy-target-class=false # Whether subclass-based (CGLIB) proxies are to be created (true) as opposed to standard Java interface-based proxies (false).

 

# IDENTITY (ContextIdApplicationContextInitializer)

spring.application.index= # Application index.

spring.application.name= # Application name.

 

# ADMIN (SpringApplicationAdminJmxAutoConfiguration)

spring.application.admin.enabled=false # Enable admin features for the application.

spring.application.admin.jmx-name=org.springframework.boot:type=Admin,name=SpringApplication # JMX name of the application admin MBean.

 

# AUTO-CONFIGURATION

spring.autoconfigure.exclude= # Auto-configuration classes to exclude.

 

# SPRING CORE

spring.beaninfo.ignore=true # Skip search of BeanInfo classes.

 

# SPRING CACHE (CacheProperties)

spring.cache.cache-names= # Comma-separated list of cache names to create if supported by the underlying cache manager.

spring.cache.caffeine.spec= # The spec to use to create caches. Check CaffeineSpec for more details on the spec format.

spring.cache.couchbase.expiration=0 # Entry expiration in milliseconds. By default the entries never expire.

spring.cache.ehcache.config= # The location of the configuration file to use to initialize EhCache.

spring.cache.guava.spec= # The spec to use to create caches. Check CacheBuilderSpec for more details on the spec format.

spring.cache.infinispan.config= # The location of the configuration file to use to initialize Infinispan.

spring.cache.jcache.config= # The location of the configuration file to use to initialize the cache manager.

spring.cache.jcache.provider= # Fully qualified name of the CachingProvider implementation to use to retrieve the JSR-107 compliant cache manager. Only needed if more than one JSR-107 implementation is available on the classpath.

spring.cache.type= # Cache type, auto-detected according to the environment by default.

 

# SPRING CONFIG - using environment property only (ConfigFileApplicationListener)

spring.config.location= # Config file locations.

spring.config.name=application # Config file name.

 

# HAZELCAST (HazelcastProperties)

spring.hazelcast.config= # The location of the configuration file to use to initialize Hazelcast.

 

# PROJECT INFORMATION (ProjectInfoProperties)

spring.info.build.location=classpath:META-INF/build-info.properties # Location of the generated build-info.properties file.

spring.info.git.location=classpath:git.properties # Location of the generated git.properties file.

 

# JMX

spring.jmx.default-domain= # JMX domain name.

spring.jmx.enabled=true # Expose management beans to the JMX domain.

spring.jmx.server=mbeanServer # MBeanServer bean name.

 

# Email (MailProperties)

spring.mail.default-encoding=UTF-8 # Default MimeMessage encoding.

spring.mail.host= # SMTP server host. For instance `smtp.example.com`

spring.mail.jndi-name= # Session JNDI name. When set, takes precedence to others mail settings.

spring.mail.password= # Login password of the SMTP server.

spring.mail.port= # SMTP server port.

spring.mail.properties.*= # Additional JavaMail session properties.

spring.mail.protocol=smtp # Protocol used by the SMTP server.

spring.mail.test-connection=false # Test that the mail server is available on startup.

spring.mail.username= # Login user of the SMTP server.

 

# APPLICATION SETTINGS (SpringApplication)

spring.main.banner-mode=console # Mode used to display the banner when the application runs.

spring.main.sources= # Sources (class name, package name or XML resource location) to include in the ApplicationContext.

spring.main.web-environment= # Run the application in a web environment (auto-detected by default).

 

# FILE ENCODING (FileEncodingApplicationListener)

spring.mandatory-file-encoding= # Expected character encoding the application must use.

 

# INTERNATIONALIZATION (MessageSourceAutoConfiguration)

spring.messages.always-use-message-format=false # Set whether to always apply the MessageFormat rules, parsing even messages without arguments.

spring.messages.basename=messages # Comma-separated list of basenames, each following the ResourceBundle convention.

spring.messages.cache-seconds=-1 # Loaded resource bundle files cache expiration, in seconds. When set to -1, bundles are cached forever.

spring.messages.encoding=UTF-8 # Message bundles encoding.

spring.messages.fallback-to-system-locale=true # Set whether to fall back to the system Locale if no files for a specific Locale have been found.

 

# OUTPUT

spring.output.ansi.enabled=detect # Configure the ANSI output.

 

# PID FILE (ApplicationPidFileWriter)

spring.pid.fail-on-write-error= # Fail if ApplicationPidFileWriter is used but it cannot write the PID file.

spring.pid.file= # Location of the PID file to write (if ApplicationPidFileWriter is used).

 

# PROFILES

spring.profiles.active= # Comma-separated list (or list if using YAML) of active profiles.

spring.profiles.include= # Unconditionally activate the specified comma separated profiles (or list of profiles if using YAML).

 

# SENDGRID (SendGridAutoConfiguration)

spring.sendgrid.api-key= # SendGrid api key (alternative to username/password)

spring.sendgrid.username= # SendGrid account username

spring.sendgrid.password= # SendGrid account password

spring.sendgrid.proxy.host= # SendGrid proxy host

spring.sendgrid.proxy.port= # SendGrid proxy port

 

 

# ----------------------------------------

# WEB PROPERTIES

# ----------------------------------------

 

# EMBEDDED SERVER CONFIGURATION (ServerProperties)

server.address= # Network address to which the server should bind to.

server.compression.enabled=false # If response compression is enabled.

server.compression.excluded-user-agents= # List of user-agents to exclude from compression.

server.compression.mime-types= # Comma-separated list of MIME types that should be compressed. For instance `text/html,text/css,application/json`

server.compression.min-response-size= # Minimum response size that is required for compression to be performed. For instance 2048

server.connection-timeout= # Time in milliseconds that connectors will wait for another HTTP request before closing the connection. When not set, the connector's container-specific default will be used. Use a value of -1 to indicate no (i.e. infinite) timeout.

server.context-parameters.*= # Servlet context init parameters. For instance `server.context-parameters.a=alpha`

server.context-path= # Context path of the application.

server.display-name=application # Display name of the application.

server.max-http-header-size=0 # Maximum size in bytes of the HTTP message header.

server.error.include-stacktrace=never # When to include a "stacktrace" attribute.

server.error.path=/error # Path of the error controller.

server.error.whitelabel.enabled=true # Enable the default error page displayed in browsers in case of a server error.

server.jetty.acceptors= # Number of acceptor threads to use.

server.jetty.max-http-post-size=0 # Maximum size in bytes of the HTTP post or put content.

server.jetty.selectors= # Number of selector threads to use.

server.jsp-servlet.class-name=org.apache.jasper.servlet.JspServlet # The class name of the JSP servlet.

server.jsp-servlet.init-parameters.*= # Init parameters used to configure the JSP servlet

server.jsp-servlet.registered=true # Whether or not the JSP servlet is registered

server.port=8080 # Server HTTP port.

server.server-header= # Value to use for the Server response header (no header is sent if empty)

server.servlet-path=/ # Path of the main dispatcher servlet.

server.use-forward-headers= # If X-Forwarded-* headers should be applied to the HttpRequest.

server.session.cookie.comment= # Comment for the session cookie.

server.session.cookie.domain= # Domain for the session cookie.

server.session.cookie.http-only= # "HttpOnly" flag for the session cookie.

server.session.cookie.max-age= # Maximum age of the session cookie in seconds.

server.session.cookie.name= # Session cookie name.

server.session.cookie.path= # Path of the session cookie.

server.session.cookie.secure= # "Secure" flag for the session cookie.

server.session.persistent=false # Persist session data between restarts.

server.session.store-dir= # Directory used to store session data.

server.session.timeout= # Session timeout in seconds.

server.session.tracking-modes= # Session tracking modes (one or more of the following: "cookie", "url", "ssl").

server.ssl.ciphers= # Supported SSL ciphers.

server.ssl.client-auth= # Whether client authentication is wanted ("want") or needed ("need"). Requires a trust store.

server.ssl.enabled= # Enable SSL support.

server.ssl.enabled-protocols= # Enabled SSL protocols.

server.ssl.key-alias= # Alias that identifies the key in the key store.

server.ssl.key-password= # Password used to access the key in the key store.

server.ssl.key-store= # Path to the key store that holds the SSL certificate (typically a jks file).

server.ssl.key-store-password= # Password used to access the key store.

server.ssl.key-store-provider= # Provider for the key store.

server.ssl.key-store-type= # Type of the key store.

server.ssl.protocol=TLS # SSL protocol to use.

server.ssl.trust-store= # Trust store that holds SSL certificates.

server.ssl.trust-store-password= # Password used to access the trust store.

server.ssl.trust-store-provider= # Provider for the trust store.

server.ssl.trust-store-type= # Type of the trust store.

server.tomcat.accept-count= # Maximum queue length for incoming connection requests when all possible request processing threads are in use.

server.tomcat.accesslog.buffered=true # Buffer output such that it is only flushed periodically.

server.tomcat.accesslog.directory=logs # Directory in which log files are created. Can be relative to the tomcat base dir or absolute.

server.tomcat.accesslog.enabled=false # Enable access log.

server.tomcat.accesslog.pattern=common # Format pattern for access logs.

server.tomcat.accesslog.prefix=access_log # Log file name prefix.

server.tomcat.accesslog.rename-on-rotate=false # Defer inclusion of the date stamp in the file name until rotate time.

server.tomcat.accesslog.request-attributes-enabled=false # Set request attributes for IP address, Hostname, protocol and port used for the request.

server.tomcat.accesslog.rotate=true # Enable access log rotation.

server.tomcat.accesslog.suffix=.log # Log file name suffix.

server.tomcat.additional-tld-skip-patterns= # Comma-separated list of additional patterns that match jars to ignore for TLD scanning.

server.tomcat.background-processor-delay=30 # Delay in seconds between the invocation of backgroundProcess methods.

server.tomcat.basedir= # Tomcat base directory. If not specified a temporary directory will be used.

server.tomcat.internal-proxies=10\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\

        192\\.168\\.\\d{1,3}\\.\\d{1,3}|\\

        169\\.254\\.\\d{1,3}\\.\\d{1,3}|\\

        127\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\

        172\\.1[6-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\

        172\\.2[0-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\

        172\\.3[0-1]{1}\\.\\d{1,3}\\.\\d{1,3} # regular expression matching trusted IP addresses.

server.tomcat.max-connections= # Maximum number of connections that the server will accept and process at any given time.

server.tomcat.max-http-post-size=0 # Maximum size in bytes of the HTTP post content.

server.tomcat.max-threads=0 # Maximum amount of worker threads.

server.tomcat.min-spare-threads=0 # Minimum amount of worker threads.

server.tomcat.port-header=X-Forwarded-Port # Name of the HTTP header used to override the original port value.

server.tomcat.protocol-header= # Header that holds the incoming protocol, usually named "X-Forwarded-Proto".

server.tomcat.protocol-header-https-value=https # Value of the protocol header that indicates that the incoming request uses SSL.

server.tomcat.redirect-context-root= # Whether requests to the context root should be redirected by appending a / to the path.

server.tomcat.remote-ip-header= # Name of the http header from which the remote ip is extracted. For instance `X-FORWARDED-FOR`

server.tomcat.uri-encoding=UTF-8 # Character encoding to use to decode the URI.

server.undertow.accesslog.dir= # Undertow access log directory.

server.undertow.accesslog.enabled=false # Enable access log.

server.undertow.accesslog.pattern=common # Format pattern for access logs.

server.undertow.accesslog.prefix=access_log. # Log file name prefix.

server.undertow.accesslog.rotate=true # Enable access log rotation.

server.undertow.accesslog.suffix=log # Log file name suffix.

server.undertow.buffer-size= # Size of each buffer in bytes.

server.undertow.buffers-per-region= # Number of buffer per region.

server.undertow.direct-buffers= # Allocate buffers outside the Java heap.

server.undertow.io-threads= # Number of I/O threads to create for the worker.

server.undertow.max-http-post-size=0 # Maximum size in bytes of the HTTP post content.

server.undertow.worker-threads= # Number of worker threads.

 

# FREEMARKER (FreeMarkerAutoConfiguration)

spring.freemarker.allow-request-override=false # Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.

spring.freemarker.allow-session-override=false # Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.

spring.freemarker.cache=false # Enable template caching.

spring.freemarker.charset=UTF-8 # Template encoding.

spring.freemarker.check-template-location=true # Check that the templates location exists.

spring.freemarker.content-type=text/html # Content-Type value.

spring.freemarker.enabled=true # Enable MVC view resolution for this technology.

spring.freemarker.expose-request-attributes=false # Set whether all request attributes should be added to the model prior to merging with the template.

spring.freemarker.expose-session-attributes=false # Set whether all HttpSession attributes should be added to the model prior to merging with the template.

spring.freemarker.expose-spring-macro-helpers=true # Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".

spring.freemarker.prefer-file-system-access=true # Prefer file system access for template loading. File system access enables hot detection of template changes.

spring.freemarker.prefix= # Prefix that gets prepended to view names when building a URL.

spring.freemarker.request-context-attribute= # Name of the RequestContext attribute for all views.

spring.freemarker.settings.*= # Well-known FreeMarker keys which will be passed to FreeMarker's Configuration.

spring.freemarker.suffix= # Suffix that gets appended to view names when building a URL.

spring.freemarker.template-loader-path=classpath:/templates/ # Comma-separated list of template paths.

spring.freemarker.view-names= # White list of view names that can be resolved.

 

# GROOVY TEMPLATES (GroovyTemplateAutoConfiguration)

spring.groovy.template.allow-request-override=false # Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.

spring.groovy.template.allow-session-override=false # Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.

spring.groovy.template.cache= # Enable template caching.

spring.groovy.template.charset=UTF-8 # Template encoding.

spring.groovy.template.check-template-location=true # Check that the templates location exists.

spring.groovy.template.configuration.*= # See GroovyMarkupConfigurer

spring.groovy.template.content-type=test/html # Content-Type value.

spring.groovy.template.enabled=true # Enable MVC view resolution for this technology.

spring.groovy.template.expose-request-attributes=false # Set whether all request attributes should be added to the model prior to merging with the template.

spring.groovy.template.expose-session-attributes=false # Set whether all HttpSession attributes should be added to the model prior to merging with the template.

spring.groovy.template.expose-spring-macro-helpers=true # Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".

spring.groovy.template.prefix= # Prefix that gets prepended to view names when building a URL.

spring.groovy.template.request-context-attribute= # Name of the RequestContext attribute for all views.

spring.groovy.template.resource-loader-path=classpath:/templates/ # Template path.

spring.groovy.template.suffix=.tpl # Suffix that gets appended to view names when building a URL.

spring.groovy.template.view-names= # White list of view names that can be resolved.

 

# SPRING HATEOAS (HateoasProperties)

spring.hateoas.use-hal-as-default-json-media-type=true # Specify if application/hal+json responses should be sent to requests that accept application/json.

 

# HTTP message conversion

spring.http.converters.preferred-json-mapper=jackson # Preferred JSON mapper to use for HTTP message conversion. Set to "gson" to force the use of Gson when both it and Jackson are on the classpath.

 

# HTTP encoding (HttpEncodingProperties)

spring.http.encoding.charset=UTF-8 # Charset of HTTP requests and responses. Added to the "Content-Type" header if not set explicitly.

spring.http.encoding.enabled=true # Enable http encoding support.

spring.http.encoding.force= # Force the encoding to the configured charset on HTTP requests and responses.

spring.http.encoding.force-request= # Force the encoding to the configured charset on HTTP requests. Defaults to true when "force" has not been specified.

spring.http.encoding.force-response= # Force the encoding to the configured charset on HTTP responses.

spring.http.encoding.mapping= # Locale to Encoding mapping.

 

# MULTIPART (MultipartProperties)

spring.http.multipart.enabled=true # Enable support of multi-part uploads.

spring.http.multipart.file-size-threshold=0 # Threshold after which files will be written to disk. Values can use the suffixed "MB" or "KB" to indicate a Megabyte or Kilobyte size.

spring.http.multipart.location= # Intermediate location of uploaded files.

spring.http.multipart.max-file-size=1MB # Max file size. Values can use the suffixed "MB" or "KB" to indicate a Megabyte or Kilobyte size.

spring.http.multipart.max-request-size=10MB # Max request size. Values can use the suffixed "MB" or "KB" to indicate a Megabyte or Kilobyte size.

spring.http.multipart.resolve-lazily=false # Whether to resolve the multipart request lazily at the time of file or parameter access.

 

# JACKSON (JacksonProperties)

spring.jackson.date-format= # Date format string or a fully-qualified date format class name. For instance `yyyy-MM-dd HH:mm:ss`.

spring.jackson.default-property-inclusion= # Controls the inclusion of properties during serialization.

spring.jackson.deserialization.*= # Jackson on/off features that affect the way Java objects are deserialized.

spring.jackson.generator.*= # Jackson on/off features for generators.

spring.jackson.joda-date-time-format= # Joda date time format string. If not configured, "date-format" will be used as a fallback if it is configured with a format string.

spring.jackson.locale= # Locale used for formatting.

spring.jackson.mapper.*= # Jackson general purpose on/off features.

spring.jackson.parser.*= # Jackson on/off features for parsers.

spring.jackson.property-naming-strategy= # One of the constants on Jackson's PropertyNamingStrategy. Can also be a fully-qualified class name of a PropertyNamingStrategy subclass.

spring.jackson.serialization.*= # Jackson on/off features that affect the way Java objects are serialized.

spring.jackson.time-zone= # Time zone used when formatting dates. For instance `America/Los_Angeles`

 

# JERSEY (JerseyProperties)

spring.jersey.application-path= # Path that serves as the base URI for the application. Overrides the value of "@ApplicationPath" if specified.

spring.jersey.filter.order=0 # Jersey filter chain order.

spring.jersey.init.*= # Init parameters to pass to Jersey via the servlet or filter.

spring.jersey.servlet.load-on-startup=-1 # Load on startup priority of the Jersey servlet.

spring.jersey.type=servlet # Jersey integration type.

 

# SPRING LDAP (LdapProperties)

spring.ldap.urls= # LDAP URLs of the server.

spring.ldap.base= # Base suffix from which all operations should originate.

spring.ldap.username= # Login user of the server.

spring.ldap.password= # Login password of the server.

spring.ldap.base-environment.*= # LDAP specification settings.

 

# EMBEDDED LDAP (EmbeddedLdapProperties)

spring.ldap.embedded.base-dn= # The base DN

spring.ldap.embedded.credential.username= # Embedded LDAP username.

spring.ldap.embedded.credential.password= # Embedded LDAP password.

spring.ldap.embedded.ldif=classpath:schema.ldif # Schema (LDIF) script resource reference.

spring.ldap.embedded.port= # Embedded LDAP port.

spring.ldap.embedded.validation.enabled=true # Enable LDAP schema validation.

spring.ldap.embedded.validation.schema= # Path to the custom schema.

 

# SPRING MOBILE DEVICE VIEWS (DeviceDelegatingViewResolverAutoConfiguration)

spring.mobile.devicedelegatingviewresolver.enable-fallback=false # Enable support for fallback resolution.

spring.mobile.devicedelegatingviewresolver.enabled=false # Enable device view resolver.

spring.mobile.devicedelegatingviewresolver.mobile-prefix=mobile/ # Prefix that gets prepended to view names for mobile devices.

spring.mobile.devicedelegatingviewresolver.mobile-suffix= # Suffix that gets appended to view names for mobile devices.

spring.mobile.devicedelegatingviewresolver.normal-prefix= # Prefix that gets prepended to view names for normal devices.

spring.mobile.devicedelegatingviewresolver.normal-suffix= # Suffix that gets appended to view names for normal devices.

spring.mobile.devicedelegatingviewresolver.tablet-prefix=tablet/ # Prefix that gets prepended to view names for tablet devices.

spring.mobile.devicedelegatingviewresolver.tablet-suffix= # Suffix that gets appended to view names for tablet devices.

 

# SPRING MOBILE SITE PREFERENCE (SitePreferenceAutoConfiguration)

spring.mobile.sitepreference.enabled=true # Enable SitePreferenceHandler.

 

# MUSTACHE TEMPLATES (MustacheAutoConfiguration)

spring.mustache.allow-request-override= # Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.

spring.mustache.allow-session-override= # Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.

spring.mustache.cache= # Enable template caching.

spring.mustache.charset= # Template encoding.

spring.mustache.check-template-location= # Check that the templates location exists.

spring.mustache.content-type= # Content-Type value.

spring.mustache.enabled= # Enable MVC view resolution for this technology.

spring.mustache.expose-request-attributes= # Set whether all request attributes should be added to the model prior to merging with the template.

spring.mustache.expose-session-attributes= # Set whether all HttpSession attributes should be added to the model prior to merging with the template.

spring.mustache.expose-spring-macro-helpers= # Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".

spring.mustache.prefix=classpath:/templates/ # Prefix to apply to template names.

spring.mustache.request-context-attribute= # Name of the RequestContext attribute for all views.

spring.mustache.suffix=.html # Suffix to apply to template names.

spring.mustache.view-names= # White list of view names that can be resolved.

 

# SPRING MVC (WebMvcProperties)

spring.mvc.async.request-timeout= # Amount of time (in milliseconds) before asynchronous request handling times out.

spring.mvc.date-format= # Date format to use. For instance `dd/MM/yyyy`.

spring.mvc.dispatch-trace-request=false # Dispatch TRACE requests to the FrameworkServlet doService method.

spring.mvc.dispatch-options-request=true # Dispatch OPTIONS requests to the FrameworkServlet doService method.

spring.mvc.favicon.enabled=true # Enable resolution of favicon.ico.

spring.mvc.formcontent.putfilter.enabled=true # Enable Spring's HttpPutFormContentFilter.

spring.mvc.ignore-default-model-on-redirect=true # If the content of the "default" model should be ignored during redirect scenarios.

spring.mvc.locale= # Locale to use. By default, this locale is overridden by the "Accept-Language" header.

spring.mvc.locale-resolver=accept-header # Define how the locale should be resolved.

spring.mvc.log-resolved-exception=false # Enable warn logging of exceptions resolved by a "HandlerExceptionResolver".

spring.mvc.media-types.*= # Maps file extensions to media types for content negotiation.

spring.mvc.message-codes-resolver-format= # Formatting strategy for message codes. For instance `PREFIX_ERROR_CODE`.

spring.mvc.servlet.load-on-startup=-1 # Load on startup priority of the Spring Web Services servlet.

spring.mvc.static-path-pattern=/** # Path pattern used for static resources.

spring.mvc.throw-exception-if-no-handler-found=false # If a "NoHandlerFoundException" should be thrown if no Handler was found to process a request.

spring.mvc.view.prefix= # Spring MVC view prefix.

spring.mvc.view.suffix= # Spring MVC view suffix.

 

# SPRING RESOURCES HANDLING (ResourceProperties)

spring.resources.add-mappings=true # Enable default resource handling.

spring.resources.cache-period= # Cache period for the resources served by the resource handler, in seconds.

spring.resources.chain.cache=true # Enable caching in the Resource chain.

spring.resources.chain.enabled= # Enable the Spring Resource Handling chain. Disabled by default unless at least one strategy has been enabled.

spring.resources.chain.gzipped=false # Enable resolution of already gzipped resources.

spring.resources.chain.html-application-cache=false # Enable HTML5 application cache manifest rewriting.

spring.resources.chain.strategy.content.enabled=false # Enable the content Version Strategy.

spring.resources.chain.strategy.content.paths=/** # Comma-separated list of patterns to apply to the Version Strategy.

spring.resources.chain.strategy.fixed.enabled=false # Enable the fixed Version Strategy.

spring.resources.chain.strategy.fixed.paths=/** # Comma-separated list of patterns to apply to the Version Strategy.

spring.resources.chain.strategy.fixed.version= # Version string to use for the Version Strategy.

spring.resources.static-locations=classpath:/META-INF/resources/,classpath:/resources/,classpath:/static/,classpath:/public/ # Locations of static resources.

 

# SPRING SESSION (SessionProperties)

spring.session.hazelcast.flush-mode=on-save # Sessions flush mode.

spring.session.hazelcast.map-name=spring:session:sessions # Name of the map used to store sessions.

spring.session.jdbc.initializer.enabled= # Create the required session tables on startup if necessary. Enabled automatically if the default table name is set or a custom schema is configured.

spring.session.jdbc.schema=classpath:org/springframework/session/jdbc/schema-@@platform@@.sql # Path to the SQL file to use to initialize the database schema.

spring.session.jdbc.table-name=SPRING_SESSION # Name of database table used to store sessions.

spring.session.mongo.collection-name=sessions # Collection name used to store sessions.

spring.session.redis.flush-mode=on-save # Sessions flush mode.

spring.session.redis.namespace= # Namespace for keys used to store sessions.

spring.session.store-type= # Session store type.

 

# SPRING SOCIAL (SocialWebAutoConfiguration)

spring.social.auto-connection-views=false # Enable the connection status view for supported providers.

 

# SPRING SOCIAL FACEBOOK (FacebookAutoConfiguration)

spring.social.facebook.app-id= # your application's Facebook App ID

spring.social.facebook.app-secret= # your application's Facebook App Secret

 

# SPRING SOCIAL LINKEDIN (LinkedInAutoConfiguration)

spring.social.linkedin.app-id= # your application's LinkedIn App ID

spring.social.linkedin.app-secret= # your application's LinkedIn App Secret

 

# SPRING SOCIAL TWITTER (TwitterAutoConfiguration)

spring.social.twitter.app-id= # your application's Twitter App ID

spring.social.twitter.app-secret= # your application's Twitter App Secret

 

# THYMELEAF (ThymeleafAutoConfiguration)

spring.thymeleaf.cache=true # Enable template caching.

spring.thymeleaf.check-template=true # Check that the template exists before rendering it.

spring.thymeleaf.check-template-location=true # Check that the templates location exists.

spring.thymeleaf.content-type=text/html # Content-Type value.

spring.thymeleaf.enabled=true # Enable MVC Thymeleaf view resolution.

spring.thymeleaf.encoding=UTF-8 # Template encoding.

spring.thymeleaf.excluded-view-names= # Comma-separated list of view names that should be excluded from resolution.

spring.thymeleaf.mode=HTML5 # Template mode to be applied to templates. See also StandardTemplateModeHandlers.

spring.thymeleaf.prefix=classpath:/templates/ # Prefix that gets prepended to view names when building a URL.

spring.thymeleaf.suffix=.html # Suffix that gets appended to view names when building a URL.

spring.thymeleaf.template-resolver-order= # Order of the template resolver in the chain.

spring.thymeleaf.view-names= # Comma-separated list of view names that can be resolved.

 

# SPRING WEB SERVICES (WebServicesProperties)

spring.webservices.path=/services # Path that serves as the base URI for the services.

spring.webservices.servlet.init= # Servlet init parameters to pass to Spring Web Services.

spring.webservices.servlet.load-on-startup=-1 # Load on startup priority of the Spring Web Services servlet.

 

 

 

# ----------------------------------------

# SECURITY PROPERTIES

# ----------------------------------------

# SECURITY (SecurityProperties)

security.basic.authorize-mode=role # Security authorize mode to apply.

security.basic.enabled=true # Enable basic authentication.

security.basic.path=/** # Comma-separated list of paths to secure.

security.basic.realm=Spring # HTTP basic realm name.

security.enable-csrf=false # Enable Cross Site Request Forgery support.

security.filter-order=0 # Security filter chain order.

security.filter-dispatcher-types=ASYNC, FORWARD, INCLUDE, REQUEST # Security filter chain dispatcher types.

security.headers.cache=true # Enable cache control HTTP headers.

security.headers.content-security-policy= # Value for content security policy header.

security.headers.content-security-policy-mode=default # Content security policy mode.

security.headers.content-type=true # Enable "X-Content-Type-Options" header.

security.headers.frame=true # Enable "X-Frame-Options" header.

security.headers.hsts=all # HTTP Strict Transport Security (HSTS) mode (none, domain, all).

security.headers.xss=true # Enable cross site scripting (XSS) protection.

security.ignored= # Comma-separated list of paths to exclude from the default secured paths.

security.require-ssl=false # Enable secure channel for all requests.

security.sessions=stateless # Session creation policy (always, never, if_required, stateless).

security.user.name=user # Default user name.

security.user.password= # Password for the default user name. A random password is logged on startup by default.

security.user.role=USER # Granted roles for the default user name.

 

# SECURITY OAUTH2 CLIENT (OAuth2ClientProperties)

security.oauth2.client.client-id= # OAuth2 client id.

security.oauth2.client.client-secret= # OAuth2 client secret. A random secret is generated by default

 

# SECURITY OAUTH2 RESOURCES (ResourceServerProperties)

security.oauth2.resource.filter-order= # The order of the filter chain used to authenticate tokens.

security.oauth2.resource.id= # Identifier of the resource.

security.oauth2.resource.jwt.key-uri= # The URI of the JWT token. Can be set if the value is not available and the key is public.

security.oauth2.resource.jwt.key-value= # The verification key of the JWT token. Can either be a symmetric secret or PEM-encoded RSA public key.

security.oauth2.resource.prefer-token-info=true # Use the token info, can be set to false to use the user info.

security.oauth2.resource.service-id=resource #

security.oauth2.resource.token-info-uri= # URI of the token decoding endpoint.

security.oauth2.resource.token-type= # The token type to send when using the userInfoUri.

security.oauth2.resource.user-info-uri= # URI of the user endpoint.

 

# SECURITY OAUTH2 SSO (OAuth2SsoProperties)

security.oauth2.sso.filter-order= # Filter order to apply if not providing an explicit WebSecurityConfigurerAdapter

security.oauth2.sso.login-path=/login # Path to the login page, i.e. the one that triggers the redirect to the OAuth2 Authorization Server

 

 

# ----------------------------------------

# DATA PROPERTIES

# ----------------------------------------

 

# FLYWAY (FlywayProperties)

flyway.baseline-description= #

flyway.baseline-version=1 # version to start migration

flyway.baseline-on-migrate= #

flyway.check-location=false # Check that migration scripts location exists.

flyway.clean-on-validation-error= #

flyway.enabled=true # Enable flyway.

flyway.encoding= #

flyway.ignore-failed-future-migration= #

flyway.init-sqls= # SQL statements to execute to initialize a connection immediately after obtaining it.

flyway.locations=classpath:db/migration # locations of migrations scripts

flyway.out-of-order= #

flyway.password= # JDBC password if you want Flyway to create its own DataSource

flyway.placeholder-prefix= #

flyway.placeholder-replacement= #

flyway.placeholder-suffix= #

flyway.placeholders.*= #

flyway.schemas= # schemas to update

flyway.sql-migration-prefix=V #

flyway.sql-migration-separator= #

flyway.sql-migration-suffix=.sql #

flyway.table= #

flyway.url= # JDBC url of the database to migrate. If not set, the primary configured data source is used.

flyway.user= # Login user of the database to migrate.

flyway.validate-on-migrate= #

 

# LIQUIBASE (LiquibaseProperties)

liquibase.change-log=classpath:/db/changelog/db.changelog-master.yaml # Change log configuration path.

liquibase.check-change-log-location=true # Check the change log location exists.

liquibase.contexts= # Comma-separated list of runtime contexts to use.

liquibase.default-schema= # Default database schema.

liquibase.drop-first=false # Drop the database schema first.

liquibase.enabled=true # Enable liquibase support.

liquibase.labels= # Comma-separated list of runtime labels to use.

liquibase.parameters.*= # Change log parameters.

liquibase.password= # Login password of the database to migrate.

liquibase.rollback-file= # File to which rollback SQL will be written when an update is performed.

liquibase.url= # JDBC url of the database to migrate. If not set, the primary configured data source is used.

liquibase.user= # Login user of the database to migrate.

 

# COUCHBASE (CouchbaseProperties)

spring.couchbase.bootstrap-hosts= # Couchbase nodes (host or IP address) to bootstrap from.

spring.couchbase.bucket.name=default # Name of the bucket to connect to.

spring.couchbase.bucket.password=  # Password of the bucket.

spring.couchbase.env.endpoints.key-value=1 # Number of sockets per node against the Key/value service.

spring.couchbase.env.endpoints.query=1 # Number of sockets per node against the Query (N1QL) service.

spring.couchbase.env.endpoints.view=1 # Number of sockets per node against the view service.

spring.couchbase.env.ssl.enabled= # Enable SSL support. Enabled automatically if a "keyStore" is provided unless specified otherwise.

spring.couchbase.env.ssl.key-store= # Path to the JVM key store that holds the certificates.

spring.couchbase.env.ssl.key-store-password= # Password used to access the key store.

spring.couchbase.env.timeouts.connect=5000 # Bucket connections timeout in milliseconds.

spring.couchbase.env.timeouts.key-value=2500 # Blocking operations performed on a specific key timeout in milliseconds.

spring.couchbase.env.timeouts.query=7500 # N1QL query operations timeout in milliseconds.

spring.couchbase.env.timeouts.socket-connect=1000 # Socket connect connections timeout in milliseconds.

spring.couchbase.env.timeouts.view=7500 # Regular and geospatial view operations timeout in milliseconds.

 

# DAO (PersistenceExceptionTranslationAutoConfiguration)

spring.dao.exceptiontranslation.enabled=true # Enable the PersistenceExceptionTranslationPostProcessor.

 

# CASSANDRA (CassandraProperties)

spring.data.cassandra.cluster-name= # Name of the Cassandra cluster.

spring.data.cassandra.compression=none # Compression supported by the Cassandra binary protocol.

spring.data.cassandra.connect-timeout-millis= # Socket option: connection time out.

spring.data.cassandra.consistency-level= # Queries consistency level.

spring.data.cassandra.contact-points=localhost # Comma-separated list of cluster node addresses.

spring.data.cassandra.fetch-size= # Queries default fetch size.

spring.data.cassandra.keyspace-name= # Keyspace name to use.

spring.data.cassandra.load-balancing-policy= # Class name of the load balancing policy.

spring.data.cassandra.port= # Port of the Cassandra server.

spring.data.cassandra.password= # Login password of the server.

spring.data.cassandra.read-timeout-millis= # Socket option: read time out.

spring.data.cassandra.reconnection-policy= # Reconnection policy class.

spring.data.cassandra.retry-policy= # Class name of the retry policy.

spring.data.cassandra.serial-consistency-level= # Queries serial consistency level.

spring.data.cassandra.schema-action=none # Schema action to take at startup.

spring.data.cassandra.ssl=false # Enable SSL support.

spring.data.cassandra.username= # Login user of the server.

 

# DATA COUCHBASE (CouchbaseDataProperties)

spring.data.couchbase.auto-index=false # Automatically create views and indexes.

spring.data.couchbase.consistency=read-your-own-writes # Consistency to apply by default on generated queries.

spring.data.couchbase.repositories.enabled=true # Enable Couchbase repositories.

 

# ELASTICSEARCH (ElasticsearchProperties)

spring.data.elasticsearch.cluster-name=elasticsearch # Elasticsearch cluster name.

spring.data.elasticsearch.cluster-nodes= # Comma-separated list of cluster node addresses. If not specified, starts a client node.

spring.data.elasticsearch.properties.*= # Additional properties used to configure the client.

spring.data.elasticsearch.repositories.enabled=true # Enable Elasticsearch repositories.

 

# DATA LDAP

spring.data.ldap.repositories.enabled=true # Enable LDAP repositories.

 

# MONGODB (MongoProperties)

spring.data.mongodb.authentication-database= # Authentication database name.

spring.data.mongodb.database=test # Database name.

spring.data.mongodb.field-naming-strategy= # Fully qualified name of the FieldNamingStrategy to use.

spring.data.mongodb.grid-fs-database= # GridFS database name.

spring.data.mongodb.host=localhost # Mongo server host. Cannot be set with uri.

spring.data.mongodb.password= # Login password of the mongo server. Cannot be set with uri.

spring.data.mongodb.port=27017 # Mongo server port. Cannot be set with uri.

spring.data.mongodb.repositories.enabled=true # Enable Mongo repositories.

spring.data.mongodb.uri=mongodb://localhost/test # Mongo database URI. Cannot be set with host, port and credentials.

spring.data.mongodb.username= # Login user of the mongo server. Cannot be set with uri.

 

# DATA REDIS

spring.data.redis.repositories.enabled=true # Enable Redis repositories.

 

# NEO4J (Neo4jProperties)

spring.data.neo4j.compiler= # Compiler to use.

spring.data.neo4j.embedded.enabled=true # Enable embedded mode if the embedded driver is available.

spring.data.neo4j.open-in-view=false # Register OpenSessionInViewInterceptor. Binds a Neo4j Session to the thread for the entire processing of the request.

spring.data.neo4j.password= # Login password of the server.

spring.data.neo4j.repositories.enabled=true # Enable Neo4j repositories.

spring.data.neo4j.uri= # URI used by the driver. Auto-detected by default.

spring.data.neo4j.username= # Login user of the server.

 

# DATA REST (RepositoryRestProperties)

spring.data.rest.base-path= # Base path to be used by Spring Data REST to expose repository resources.

spring.data.rest.default-page-size= # Default size of pages.

spring.data.rest.detection-strategy=default # Strategy to use to determine which repositories get exposed.

spring.data.rest.enable-enum-translation= # Enable enum value translation via the Spring Data REST default resource bundle.

spring.data.rest.limit-param-name= # Name of the URL query string parameter that indicates how many results to return at once.

spring.data.rest.max-page-size= # Maximum size of pages.

spring.data.rest.page-param-name= # Name of the URL query string parameter that indicates what page to return.

spring.data.rest.return-body-on-create= # Return a response body after creating an entity.

spring.data.rest.return-body-on-update= # Return a response body after updating an entity.

spring.data.rest.sort-param-name= # Name of the URL query string parameter that indicates what direction to sort results.

 

# SOLR (SolrProperties)

spring.data.solr.host=http://127.0.0.1:8983/solr # Solr host. Ignored if "zk-host" is set.

spring.data.solr.repositories.enabled=true # Enable Solr repositories.

spring.data.solr.zk-host= # ZooKeeper host address in the form HOST:PORT.

 

# DATASOURCE (DataSourceAutoConfiguration & DataSourceProperties)

spring.datasource.continue-on-error=false # Do not stop if an error occurs while initializing the database.

spring.datasource.data= # Data (DML) script resource references.

spring.datasource.data-username= # User of the database to execute DML scripts (if different).

spring.datasource.data-password= # Password of the database to execute DML scripts (if different).

spring.datasource.dbcp2.*= # Commons DBCP2 specific settings

spring.datasource.driver-class-name= # Fully qualified name of the JDBC driver. Auto-detected based on the URL by default.

spring.datasource.generate-unique-name=false # Generate a random datasource name.

spring.datasource.hikari.*= # Hikari specific settings

spring.datasource.initialize=true # Populate the database using 'data.sql'.

spring.datasource.jmx-enabled=false # Enable JMX support (if provided by the underlying pool).

spring.datasource.jndi-name= # JNDI location of the datasource. Class, url, username & password are ignored when set.

spring.datasource.name=testdb # Name of the datasource.

spring.datasource.password= # Login password of the database.

spring.datasource.platform=all # Platform to use in the schema resource (schema-${platform}.sql).

spring.datasource.schema= # Schema (DDL) script resource references.

spring.datasource.schema-username= # User of the database to execute DDL scripts (if different).

spring.datasource.schema-password= # Password of the database to execute DDL scripts (if different).

spring.datasource.separator=; # Statement separator in SQL initialization scripts.

spring.datasource.sql-script-encoding= # SQL scripts encoding.

spring.datasource.tomcat.*= # Tomcat datasource specific settings

spring.datasource.type= # Fully qualified name of the connection pool implementation to use. By default, it is auto-detected from the classpath.

spring.datasource.url= # JDBC url of the database.

spring.datasource.username=

 

# JEST (Elasticsearch HTTP client) (JestProperties)

spring.elasticsearch.jest.connection-timeout=3000 # Connection timeout in milliseconds.

spring.elasticsearch.jest.multi-threaded=true # Enable connection requests from multiple execution threads.

spring.elasticsearch.jest.password= # Login password.

spring.elasticsearch.jest.proxy.host= # Proxy host the HTTP client should use.

spring.elasticsearch.jest.proxy.port= # Proxy port the HTTP client should use.

spring.elasticsearch.jest.read-timeout=3000 # Read timeout in milliseconds.

spring.elasticsearch.jest.uris=http://localhost:9200 # Comma-separated list of the Elasticsearch instances to use.

spring.elasticsearch.jest.username= # Login user.

 

# H2 Web Console (H2ConsoleProperties)

spring.h2.console.enabled=false # Enable the console.

spring.h2.console.path=/h2-console # Path at which the console will be available.

spring.h2.console.settings.trace=false # Enable trace output.

spring.h2.console.settings.web-allow-others=false # Enable remote access.

 

# JOOQ (JooqAutoConfiguration)

spring.jooq.sql-dialect= # SQLDialect JOOQ used when communicating with the configured datasource. For instance `POSTGRES`

 

# JPA (JpaBaseConfiguration, HibernateJpaAutoConfiguration)

spring.data.jpa.repositories.enabled=true # Enable JPA repositories.

spring.jpa.database= # Target database to operate on, auto-detected by default. Can be alternatively set using the "databasePlatform" property.

spring.jpa.database-platform= # Name of the target database to operate on, auto-detected by default. Can be alternatively set using the "Database" enum.

spring.jpa.generate-ddl=false # Initialize the schema on startup.

spring.jpa.hibernate.ddl-auto= # DDL mode. This is actually a shortcut for the "hibernate.hbm2ddl.auto" property. Default to "create-drop" when using an embedded database, "none" otherwise.

spring.jpa.hibernate.naming.implicit-strategy= # Hibernate 5 implicit naming strategy fully qualified name.

spring.jpa.hibernate.naming.physical-strategy= # Hibernate 5 physical naming strategy fully qualified name.

spring.jpa.hibernate.naming.strategy= # Hibernate 4 naming strategy fully qualified name. Not supported with Hibernate 5.

spring.jpa.hibernate.use-new-id-generator-mappings= # Use Hibernate's newer IdentifierGenerator for AUTO, TABLE and SEQUENCE.

spring.jpa.open-in-view=true # Register OpenEntityManagerInViewInterceptor. Binds a JPA EntityManager to the thread for the entire processing of the request.

spring.jpa.properties.*= # Additional native properties to set on the JPA provider.

spring.jpa.show-sql=false # Enable logging of SQL statements.

 

# JTA (JtaAutoConfiguration)

spring.jta.enabled=true # Enable JTA support.

spring.jta.log-dir= # Transaction logs directory.

spring.jta.transaction-manager-id= # Transaction manager unique identifier.

 

# ATOMIKOS (AtomikosProperties)

spring.jta.atomikos.connectionfactory.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool.

spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag=true # Whether or not to ignore the transacted flag when creating session.

spring.jta.atomikos.connectionfactory.local-transaction-mode=false # Whether or not local transactions are desired.

spring.jta.atomikos.connectionfactory.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread.

spring.jta.atomikos.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.

spring.jta.atomikos.connectionfactory.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.

spring.jta.atomikos.connectionfactory.max-pool-size=1 # The maximum size of the pool.

spring.jta.atomikos.connectionfactory.min-pool-size=1 # The minimum size of the pool.

spring.jta.atomikos.connectionfactory.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.

spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory # The unique name used to identify the resource during recovery.

spring.jta.atomikos.datasource.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool.

spring.jta.atomikos.datasource.default-isolation-level= # Default isolation level of connections provided by the pool.

spring.jta.atomikos.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection.

spring.jta.atomikos.datasource.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread.

spring.jta.atomikos.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.

spring.jta.atomikos.datasource.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.

spring.jta.atomikos.datasource.max-pool-size=1 # The maximum size of the pool.

spring.jta.atomikos.datasource.min-pool-size=1 # The minimum size of the pool.

spring.jta.atomikos.datasource.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.

spring.jta.atomikos.datasource.test-query= # SQL query or statement used to validate a connection before returning it.

spring.jta.atomikos.datasource.unique-resource-name=dataSource # The unique name used to identify the resource during recovery.

spring.jta.atomikos.properties.checkpoint-interval=500 # Interval between checkpoints.

spring.jta.atomikos.properties.console-file-count=1 # Number of debug logs files that can be created.

spring.jta.atomikos.properties.console-file-limit=-1 # How many bytes can be stored at most in debug logs files.

spring.jta.atomikos.properties.console-file-name=tm.out # Debug logs file name.

spring.jta.atomikos.properties.console-log-level=warn # Console log level.

spring.jta.atomikos.properties.default-jta-timeout=10000 # Default timeout for JTA transactions.

spring.jta.atomikos.properties.enable-logging=true # Enable disk logging.

spring.jta.atomikos.properties.force-shutdown-on-vm-exit=false # Specify if a VM shutdown should trigger forced shutdown of the transaction core.

spring.jta.atomikos.properties.log-base-dir= # Directory in which the log files should be stored.

spring.jta.atomikos.properties.log-base-name=tmlog # Transactions log file base name.

spring.jta.atomikos.properties.max-actives=50 # Maximum number of active transactions.

spring.jta.atomikos.properties.max-timeout=300000 # Maximum timeout (in milliseconds) that can be allowed for transactions.

spring.jta.atomikos.properties.output-dir= # Directory in which to store the debug log files.

spring.jta.atomikos.properties.serial-jta-transactions=true # Specify if sub-transactions should be joined when possible.

spring.jta.atomikos.properties.service= # Transaction manager implementation that should be started.

spring.jta.atomikos.properties.threaded-two-phase-commit=true # Use different (and concurrent) threads for two-phase commit on the participating resources.

spring.jta.atomikos.properties.transaction-manager-unique-name= # Transaction manager's unique name.

 

# BITRONIX

spring.jta.bitronix.connectionfactory.acquire-increment=1 # Number of connections to create when growing the pool.

spring.jta.bitronix.connectionfactory.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.

spring.jta.bitronix.connectionfactory.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool.

spring.jta.bitronix.connectionfactory.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions.

spring.jta.bitronix.connectionfactory.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted.

spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically.

spring.jta.bitronix.connectionfactory.cache-producers-consumers=true # Whether or not produces and consumers should be cached.

spring.jta.bitronix.connectionfactory.defer-connection-release=true # Whether or not the provider can run many transactions on the same connection and supports transaction interleaving.

spring.jta.bitronix.connectionfactory.ignore-recovery-failures=false # Whether or not recovery failures should be ignored.

spring.jta.bitronix.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.

spring.jta.bitronix.connectionfactory.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit.

spring.jta.bitronix.connectionfactory.min-pool-size=0 # The minimum size of the pool.

spring.jta.bitronix.connectionfactory.password= # The password to use to connect to the JMS provider.

spring.jta.bitronix.connectionfactory.share-transaction-connections=false #  Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction.

spring.jta.bitronix.connectionfactory.test-connections=true # Whether or not connections should be tested when acquired from the pool.

spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE).

spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory # The unique name used to identify the resource during recovery.

spring.jta.bitronix.connectionfactory.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources.

spring.jta.bitronix.connectionfactory.user= # The user to use to connect to the JMS provider.

spring.jta.bitronix.datasource.acquire-increment=1 # Number of connections to create when growing the pool.

spring.jta.bitronix.datasource.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.

spring.jta.bitronix.datasource.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool.

spring.jta.bitronix.datasource.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions.

spring.jta.bitronix.datasource.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted.

spring.jta.bitronix.datasource.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically.

spring.jta.bitronix.datasource.cursor-holdability= # The default cursor holdability for connections.

spring.jta.bitronix.datasource.defer-connection-release=true # Whether or not the database can run many transactions on the same connection and supports transaction interleaving.

spring.jta.bitronix.datasource.enable-jdbc4-connection-test= # Whether or not Connection.isValid() is called when acquiring a connection from the pool.

spring.jta.bitronix.datasource.ignore-recovery-failures=false # Whether or not recovery failures should be ignored.

spring.jta.bitronix.datasource.isolation-level= # The default isolation level for connections.

spring.jta.bitronix.datasource.local-auto-commit= # The default auto-commit mode for local transactions.

spring.jta.bitronix.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection.

spring.jta.bitronix.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.

spring.jta.bitronix.datasource.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit.

spring.jta.bitronix.datasource.min-pool-size=0 # The minimum size of the pool.

spring.jta.bitronix.datasource.prepared-statement-cache-size=0 # The target size of the prepared statement cache. 0 disables the cache.

spring.jta.bitronix.datasource.share-transaction-connections=false #  Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction.

spring.jta.bitronix.datasource.test-query= # SQL query or statement used to validate a connection before returning it.

spring.jta.bitronix.datasource.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE).

spring.jta.bitronix.datasource.unique-name=dataSource # The unique name used to identify the resource during recovery.

spring.jta.bitronix.datasource.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources.

spring.jta.bitronix.properties.allow-multiple-lrc=false # Allow multiple LRC resources to be enlisted into the same transaction.

spring.jta.bitronix.properties.asynchronous2-pc=false # Enable asynchronously execution of two phase commit.

spring.jta.bitronix.properties.background-recovery-interval-seconds=60 # Interval in seconds at which to run the recovery process in the background.

spring.jta.bitronix.properties.current-node-only-recovery=true # Recover only the current node.

spring.jta.bitronix.properties.debug-zero-resource-transaction=false # Log the creation and commit call stacks of transactions executed without a single enlisted resource.

spring.jta.bitronix.properties.default-transaction-timeout=60 # Default transaction timeout in seconds.

spring.jta.bitronix.properties.disable-jmx=false # Enable JMX support.

spring.jta.bitronix.properties.exception-analyzer= # Set the fully qualified name of the exception analyzer implementation to use.

spring.jta.bitronix.properties.filter-log-status=false # Enable filtering of logs so that only mandatory logs are written.

spring.jta.bitronix.properties.force-batching-enabled=true #  Set if disk forces are batched.

spring.jta.bitronix.properties.forced-write-enabled=true # Set if logs are forced to disk.

spring.jta.bitronix.properties.graceful-shutdown-interval=60 # Maximum amount of seconds the TM will wait for transactions to get done before aborting them at shutdown time.

spring.jta.bitronix.properties.jndi-transaction-synchronization-registry-name= # JNDI name of the TransactionSynchronizationRegistry.

spring.jta.bitronix.properties.jndi-user-transaction-name= # JNDI name of the UserTransaction.

spring.jta.bitronix.properties.journal=disk # Name of the journal. Can be 'disk', 'null' or a class name.

spring.jta.bitronix.properties.log-part1-filename=btm1.tlog # Name of the first fragment of the journal.

spring.jta.bitronix.properties.log-part2-filename=btm2.tlog # Name of the second fragment of the journal.

spring.jta.bitronix.properties.max-log-size-in-mb=2 # Maximum size in megabytes of the journal fragments.

spring.jta.bitronix.properties.resource-configuration-filename= # ResourceLoader configuration file name.

spring.jta.bitronix.properties.server-id= # ASCII ID that must uniquely identify this TM instance. Default to the machine's IP address.

spring.jta.bitronix.properties.skip-corrupted-logs=false # Skip corrupted transactions log entries.

spring.jta.bitronix.properties.warn-about-zero-resource-transaction=true # Log a warning for transactions executed without a single enlisted resource.

 

# NARAYANA (NarayanaProperties)

spring.jta.narayana.default-timeout=60 # Transaction timeout in seconds.

spring.jta.narayana.expiry-scanners=com.arjuna.ats.internal.arjuna.recovery.ExpiredTransactionStatusManagerScanner # Comma-separated list of expiry scanners.

spring.jta.narayana.log-dir= # Transaction object store directory.

spring.jta.narayana.one-phase-commit=true # Enable one phase commit optimisation.

spring.jta.narayana.periodic-recovery-period=120 # Interval in which periodic recovery scans are performed in seconds.

spring.jta.narayana.recovery-backoff-period=10 # Back off period between first and second phases of the recovery scan in seconds.

spring.jta.narayana.recovery-db-pass= # Database password to be used by recovery manager.

spring.jta.narayana.recovery-db-user= # Database username to be used by recovery manager.

spring.jta.narayana.recovery-jms-pass= # JMS password to be used by recovery manager.

spring.jta.narayana.recovery-jms-user= # JMS username to be used by recovery manager.

spring.jta.narayana.recovery-modules= # Comma-separated list of recovery modules.

spring.jta.narayana.transaction-manager-id=1 # Unique transaction manager id.

spring.jta.narayana.xa-resource-orphan-filters= # Comma-separated list of orphan filters.

 

# EMBEDDED MONGODB (EmbeddedMongoProperties)

spring.mongodb.embedded.features=SYNC_DELAY # Comma-separated list of features to enable.

spring.mongodb.embedded.storage.database-dir= # Directory used for data storage.

spring.mongodb.embedded.storage.oplog-size= # Maximum size of the oplog in megabytes.

spring.mongodb.embedded.storage.repl-set-name= # Name of the replica set.

spring.mongodb.embedded.version=2.6.10 # Version of Mongo to use.

 

# REDIS (RedisProperties)

spring.redis.cluster.max-redirects= # Maximum number of redirects to follow when executing commands across the cluster.

spring.redis.cluster.nodes= # Comma-separated list of "host:port" pairs to bootstrap from.

spring.redis.database=0 # Database index used by the connection factory.

spring.redis.url= # Connection URL, will override host, port and password (user will be ignored), e.g. redis://user:password@example.com:6379

spring.redis.host=localhost # Redis server host.

spring.redis.password= # Login password of the redis server.

spring.redis.ssl=false # Enable SSL support.

spring.redis.pool.max-active=8 # Max number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.

spring.redis.pool.max-idle=8 # Max number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.

spring.redis.pool.max-wait=-1 # Maximum amount of time (in milliseconds) a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.

spring.redis.pool.min-idle=0 # Target for the minimum number of idle connections to maintain in the pool. This setting only has an effect if it is positive.

spring.redis.port=6379 # Redis server port.

spring.redis.sentinel.master= # Name of Redis server.

spring.redis.sentinel.nodes= # Comma-separated list of host:port pairs.

spring.redis.timeout=0 # Connection timeout in milliseconds.

 

# TRANSACTION (TransactionProperties)

spring.transaction.default-timeout= # Default transaction timeout in seconds.

spring.transaction.rollback-on-commit-failure= # Perform the rollback on commit failures.

 

 

 

# ----------------------------------------

# INTEGRATION PROPERTIES

# ----------------------------------------

 

# ACTIVEMQ (ActiveMQProperties)

spring.activemq.broker-url= # URL of the ActiveMQ broker. Auto-generated by default. For instance `tcp://localhost:61616`

spring.activemq.in-memory=true # Specify if the default broker URL should be in memory. Ignored if an explicit broker has been specified.

spring.activemq.password= # Login password of the broker.

spring.activemq.user= # Login user of the broker.

spring.activemq.packages.trust-all=false # Trust all packages.

spring.activemq.packages.trusted= # Comma-separated list of specific packages to trust (when not trusting all packages).

spring.activemq.pool.configuration.*= # See PooledConnectionFactory.

spring.activemq.pool.enabled=false # Whether a PooledConnectionFactory should be created instead of a regular ConnectionFactory.

spring.activemq.pool.expiry-timeout=0 # Connection expiration timeout in milliseconds.

spring.activemq.pool.idle-timeout=30000 # Connection idle timeout in milliseconds.

spring.activemq.pool.max-connections=1 # Maximum number of pooled connections.

 

# ARTEMIS (ArtemisProperties)

spring.artemis.embedded.cluster-password= # Cluster password. Randomly generated on startup by default.

spring.artemis.embedded.data-directory= # Journal file directory. Not necessary if persistence is turned off.

spring.artemis.embedded.enabled=true # Enable embedded mode if the Artemis server APIs are available.

spring.artemis.embedded.persistent=false # Enable persistent store.

spring.artemis.embedded.queues= # Comma-separated list of queues to create on startup.

spring.artemis.embedded.server-id= # Server id. By default, an auto-incremented counter is used.

spring.artemis.embedded.topics= # Comma-separated list of topics to create on startup.

spring.artemis.host=localhost # Artemis broker host.

spring.artemis.mode= # Artemis deployment mode, auto-detected by default.

spring.artemis.password= # Login password of the broker.

spring.artemis.port=61616 # Artemis broker port.

spring.artemis.user= # Login user of the broker.

 

# SPRING BATCH (BatchProperties)

spring.batch.initializer.enabled= # Create the required batch tables on startup if necessary. Enabled automatically if no custom table prefix is set or if a custom schema is configured.

spring.batch.job.enabled=true # Execute all Spring Batch jobs in the context on startup.

spring.batch.job.names= # Comma-separated list of job names to execute on startup (For instance `job1,job2`). By default, all Jobs found in the context are executed.

spring.batch.schema=classpath:org/springframework/batch/core/schema-@@platform@@.sql # Path to the SQL file to use to initialize the database schema.

spring.batch.table-prefix= # Table prefix for all the batch meta-data tables.

 

# JMS (JmsProperties)

spring.jms.jndi-name= # Connection factory JNDI name. When set, takes precedence to others connection factory auto-configurations.

spring.jms.listener.acknowledge-mode= # Acknowledge mode of the container. By default, the listener is transacted with automatic acknowledgment.

spring.jms.listener.auto-startup=true # Start the container automatically on startup.

spring.jms.listener.concurrency= # Minimum number of concurrent consumers.

spring.jms.listener.max-concurrency= # Maximum number of concurrent consumers.

spring.jms.pub-sub-domain=false # Specify if the default destination type is topic.

spring.jms.template.default-destination= # Default destination to use on send/receive operations that do not have a destination parameter.

spring.jms.template.delivery-delay= # Delivery delay to use for send calls in milliseconds.

spring.jms.template.delivery-mode= # Delivery mode. Enable QoS when set.

spring.jms.template.priority= # Priority of a message when sending. Enable QoS when set.

spring.jms.template.qos-enabled= # Enable explicit QoS when sending a message.

spring.jms.template.receive-timeout= # Timeout to use for receive calls in milliseconds.

spring.jms.template.time-to-live= # Time-to-live of a message when sending in milliseconds. Enable QoS when set.

 

# APACHE KAFKA (KafkaProperties)

spring.kafka.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster.

spring.kafka.client-id= # Id to pass to the server when making requests; used for server-side logging.

spring.kafka.consumer.auto-commit-interval= # Frequency in milliseconds that the consumer offsets are auto-committed to Kafka if 'enable.auto.commit' true.

spring.kafka.consumer.auto-offset-reset= # What to do when there is no initial offset in Kafka or if the current offset does not exist any more on the server.

spring.kafka.consumer.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster.

spring.kafka.consumer.client-id= # Id to pass to the server when making requests; used for server-side logging.

spring.kafka.consumer.enable-auto-commit= # If true the consumer's offset will be periodically committed in the background.

spring.kafka.consumer.fetch-max-wait= # Maximum amount of time in milliseconds the server will block before answering the fetch request if there isn't sufficient data to immediately satisfy the requirement given by "fetch.min.bytes".

spring.kafka.consumer.fetch-min-size= # Minimum amount of data the server should return for a fetch request in bytes.

spring.kafka.consumer.group-id= # Unique string that identifies the consumer group this consumer belongs to.

spring.kafka.consumer.heartbeat-interval= # Expected time in milliseconds between heartbeats to the consumer coordinator.

spring.kafka.consumer.key-deserializer= # Deserializer class for keys.

spring.kafka.consumer.max-poll-records= # Maximum number of records returned in a single call to poll().

spring.kafka.consumer.value-deserializer= # Deserializer class for values.

spring.kafka.listener.ack-count= # Number of records between offset commits when ackMode is "COUNT" or "COUNT_TIME".

spring.kafka.listener.ack-mode= # Listener AckMode; see the spring-kafka documentation.

spring.kafka.listener.ack-time= # Time in milliseconds between offset commits when ackMode is "TIME" or "COUNT_TIME".

spring.kafka.listener.concurrency= # Number of threads to run in the listener containers.

spring.kafka.listener.poll-timeout= # Timeout in milliseconds to use when polling the consumer.

spring.kafka.producer.acks= # Number of acknowledgments the producer requires the leader to have received before considering a request complete.

spring.kafka.producer.batch-size= # Number of records to batch before sending.

spring.kafka.producer.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster.

spring.kafka.producer.buffer-memory= # Total bytes of memory the producer can use to buffer records waiting to be sent to the server.

spring.kafka.producer.client-id= # Id to pass to the server when making requests; used for server-side logging.

spring.kafka.producer.compression-type= # Compression type for all data generated by the producer.

spring.kafka.producer.key-serializer= # Serializer class for keys.

spring.kafka.producer.retries= # When greater than zero, enables retrying of failed sends.

spring.kafka.producer.value-serializer= # Serializer class for values.

spring.kafka.properties.*= # Additional properties used to configure the client.

spring.kafka.ssl.key-password= # Password of the private key in the key store file.

spring.kafka.ssl.keystore-location= # Location of the key store file.

spring.kafka.ssl.keystore-password= # Store password for the key store file.

spring.kafka.ssl.truststore-location= # Location of the trust store file.

spring.kafka.ssl.truststore-password= # Store password for the trust store file.

spring.kafka.template.default-topic= # Default topic to which messages will be sent.

 

# RABBIT (RabbitProperties)

spring.rabbitmq.addresses= # Comma-separated list of addresses to which the client should connect.

spring.rabbitmq.cache.channel.checkout-timeout= # Number of milliseconds to wait to obtain a channel if the cache size has been reached.

spring.rabbitmq.cache.channel.size= # Number of channels to retain in the cache.

spring.rabbitmq.cache.connection.mode=channel # Connection factory cache mode.

spring.rabbitmq.cache.connection.size= # Number of connections to cache.

spring.rabbitmq.connection-timeout= # Connection timeout, in milliseconds; zero for infinite.

spring.rabbitmq.dynamic=true # Create an AmqpAdmin bean.

spring.rabbitmq.host=localhost # RabbitMQ host.

spring.rabbitmq.listener.acknowledge-mode= # Acknowledge mode of container.

spring.rabbitmq.listener.auto-startup=true # Start the container automatically on startup.

spring.rabbitmq.listener.concurrency= # Minimum number of consumers.

spring.rabbitmq.listener.default-requeue-rejected= # Whether or not to requeue delivery failures; default `true`.

spring.rabbitmq.listener.idle-event-interval= # How often idle container events should be published in milliseconds.

spring.rabbitmq.listener.max-concurrency= # Maximum number of consumers.

spring.rabbitmq.listener.prefetch= # Number of messages to be handled in a single request. It should be greater than or equal to the transaction size (if used).

spring.rabbitmq.listener.retry.enabled=false # Whether or not publishing retries are enabled.

spring.rabbitmq.listener.retry.initial-interval=1000 # Interval between the first and second attempt to deliver a message.

spring.rabbitmq.listener.retry.max-attempts=3 # Maximum number of attempts to deliver a message.

spring.rabbitmq.listener.retry.max-interval=10000 # Maximum interval between attempts.

spring.rabbitmq.listener.retry.multiplier=1.0 # A multiplier to apply to the previous delivery retry interval.

spring.rabbitmq.listener.retry.stateless=true # Whether or not retry is stateless or stateful.

spring.rabbitmq.listener.transaction-size= # Number of messages to be processed in a transaction. For best results it should be less than or equal to the prefetch count.

spring.rabbitmq.password= # Login to authenticate against the broker.

spring.rabbitmq.port=5672 # RabbitMQ port.

spring.rabbitmq.publisher-confirms=false # Enable publisher confirms.

spring.rabbitmq.publisher-returns=false # Enable publisher returns.

spring.rabbitmq.requested-heartbeat= # Requested heartbeat timeout, in seconds; zero for none.

spring.rabbitmq.ssl.enabled=false # Enable SSL support.

spring.rabbitmq.ssl.key-store= # Path to the key store that holds the SSL certificate.

spring.rabbitmq.ssl.key-store-password= # Password used to access the key store.

spring.rabbitmq.ssl.trust-store= # Trust store that holds SSL certificates.

spring.rabbitmq.ssl.trust-store-password= # Password used to access the trust store.

spring.rabbitmq.ssl.algorithm= # SSL algorithm to use. By default configure by the rabbit client library.

spring.rabbitmq.template.mandatory=false # Enable mandatory messages.

spring.rabbitmq.template.receive-timeout=0 # Timeout for `receive()` methods.

spring.rabbitmq.template.reply-timeout=5000 # Timeout for `sendAndReceive()` methods.

spring.rabbitmq.template.retry.enabled=false # Set to true to enable retries in the `RabbitTemplate`.

spring.rabbitmq.template.retry.initial-interval=1000 # Interval between the first and second attempt to publish a message.

spring.rabbitmq.template.retry.max-attempts=3 # Maximum number of attempts to publish a message.

spring.rabbitmq.template.retry.max-interval=10000 # Maximum number of attempts to publish a message.

spring.rabbitmq.template.retry.multiplier=1.0 # A multiplier to apply to the previous publishing retry interval.

spring.rabbitmq.username= # Login user to authenticate to the broker.

spring.rabbitmq.virtual-host= # Virtual host to use when connecting to the broker.

 

 

# ----------------------------------------

# ACTUATOR PROPERTIES

# ----------------------------------------

 

# ENDPOINTS (AbstractEndpoint subclasses)

endpoints.enabled=true # Enable endpoints.

endpoints.sensitive= # Default endpoint sensitive setting.

endpoints.actuator.enabled=true # Enable the endpoint.

endpoints.actuator.path= # Endpoint URL path.

endpoints.actuator.sensitive=false # Enable security on the endpoint.

endpoints.auditevents.enabled= # Enable the endpoint.

endpoints.auditevents.path= # Endpoint path.

endpoints.auditevents.sensitive=false # Enable security on the endpoint.

endpoints.autoconfig.enabled= # Enable the endpoint.

endpoints.autoconfig.id= # Endpoint identifier.

endpoints.autoconfig.path= # Endpoint path.

endpoints.autoconfig.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.beans.enabled= # Enable the endpoint.

endpoints.beans.id= # Endpoint identifier.

endpoints.beans.path= # Endpoint path.

endpoints.beans.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.configprops.enabled= # Enable the endpoint.

endpoints.configprops.id= # Endpoint identifier.

endpoints.configprops.keys-to-sanitize=password,secret,key,token,.*credentials.*,vcap_services # Keys that should be sanitized. Keys can be simple strings that the property ends with or regex expressions.

endpoints.configprops.path= # Endpoint path.

endpoints.configprops.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.docs.curies.enabled=false # Enable the curie generation.

endpoints.docs.enabled=true # Enable actuator docs endpoint.

endpoints.docs.path=/docs #

endpoints.docs.sensitive=false #

endpoints.dump.enabled= # Enable the endpoint.

endpoints.dump.id= # Endpoint identifier.

endpoints.dump.path= # Endpoint path.

endpoints.dump.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.env.enabled= # Enable the endpoint.

endpoints.env.id= # Endpoint identifier.

endpoints.env.keys-to-sanitize=password,secret,key,token,.*credentials.*,vcap_services # Keys that should be sanitized. Keys can be simple strings that the property ends with or regex expressions.

endpoints.env.path= # Endpoint path.

endpoints.env.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.flyway.enabled= # Enable the endpoint.

endpoints.flyway.id= # Endpoint identifier.

endpoints.flyway.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.health.enabled= # Enable the endpoint.

endpoints.health.id= # Endpoint identifier.

endpoints.health.mapping.*= # Mapping of health statuses to HttpStatus codes. By default, registered health statuses map to sensible defaults (i.e. UP maps to 200).

endpoints.health.path= # Endpoint path.

endpoints.health.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.health.time-to-live=1000 # Time to live for cached result, in milliseconds.

endpoints.heapdump.enabled= # Enable the endpoint.

endpoints.heapdump.path= # Endpoint path.

endpoints.heapdump.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.hypermedia.enabled=false # Enable hypermedia support for endpoints.

endpoints.info.enabled= # Enable the endpoint.

endpoints.info.id= # Endpoint identifier.

endpoints.info.path= # Endpoint path.

endpoints.info.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.jolokia.enabled=true # Enable Jolokia endpoint.

endpoints.jolokia.path=/jolokia # Endpoint URL path.

endpoints.jolokia.sensitive=true # Enable security on the endpoint.

endpoints.liquibase.enabled= # Enable the endpoint.

endpoints.liquibase.id= # Endpoint identifier.

endpoints.liquibase.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.logfile.enabled=true # Enable the endpoint.

endpoints.logfile.external-file= # External Logfile to be accessed.

endpoints.logfile.path=/logfile # Endpoint URL path.

endpoints.logfile.sensitive=true # Enable security on the endpoint.

endpoints.loggers.enabled=true # Enable the endpoint.

endpoints.loggers.id= # Endpoint identifier.

endpoints.loggers.path=/logfile # Endpoint path.

endpoints.loggers.sensitive=true # Mark if the endpoint exposes sensitive information.

endpoints.mappings.enabled= # Enable the endpoint.

endpoints.mappings.id= # Endpoint identifier.

endpoints.mappings.path= # Endpoint path.

endpoints.mappings.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.metrics.enabled= # Enable the endpoint.

endpoints.metrics.filter.enabled=true # Enable the metrics servlet filter.

endpoints.metrics.filter.gauge-submissions=merged # Http filter gauge submissions (merged, per-http-method)

endpoints.metrics.filter.counter-submissions=merged # Http filter counter submissions (merged, per-http-method)

endpoints.metrics.id= # Endpoint identifier.

endpoints.metrics.path= # Endpoint path.

endpoints.metrics.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.shutdown.enabled= # Enable the endpoint.

endpoints.shutdown.id= # Endpoint identifier.

endpoints.shutdown.path= # Endpoint path.

endpoints.shutdown.sensitive= # Mark if the endpoint exposes sensitive information.

endpoints.trace.enabled= # Enable the endpoint.

endpoints.trace.id= # Endpoint identifier.

endpoints.trace.path= # Endpoint path.

endpoints.trace.sensitive= # Mark if the endpoint exposes sensitive information.

 

# ENDPOINTS CORS CONFIGURATION (EndpointCorsProperties)

endpoints.cors.allow-credentials= # Set whether credentials are supported. When not set, credentials are not supported.

endpoints.cors.allowed-headers= # Comma-separated list of headers to allow in a request. '*' allows all headers.

endpoints.cors.allowed-methods=GET # Comma-separated list of methods to allow. '*' allows all methods.

endpoints.cors.allowed-origins= # Comma-separated list of origins to allow. '*' allows all origins. When not set, CORS support is disabled.

endpoints.cors.exposed-headers= # Comma-separated list of headers to include in a response.

endpoints.cors.max-age=1800 # How long, in seconds, the response from a pre-flight request can be cached by clients.

 

# JMX ENDPOINT (EndpointMBeanExportProperties)

endpoints.jmx.domain= # JMX domain name. Initialized with the value of 'spring.jmx.default-domain' if set.

endpoints.jmx.enabled=true # Enable JMX export of all endpoints.

endpoints.jmx.static-names= # Additional static properties to append to all ObjectNames of MBeans representing Endpoints.

endpoints.jmx.unique-names=false # Ensure that ObjectNames are modified in case of conflict.

 

# JOLOKIA (JolokiaProperties)

jolokia.config.*= # See Jolokia manual

 

# MANAGEMENT HTTP SERVER (ManagementServerProperties)

management.add-application-context-header=true # Add the "X-Application-Context" HTTP header in each response.

management.address= # Network address that the management endpoints should bind to.

management.context-path= # Management endpoint context-path. For instance `/actuator`

management.cloudfoundry.enabled= # Enable extended Cloud Foundry actuator endpoints

management.cloudfoundry.skip-ssl-validation= # Skip SSL verification for Cloud Foundry actuator endpoint security calls

management.port= # Management endpoint HTTP port. Uses the same port as the application by default. Configure a different port to use management-specific SSL.

management.security.enabled=true # Enable security.

management.security.roles=ACTUATOR # Comma-separated list of roles that can access the management endpoint.

management.security.sessions=stateless # Session creating policy to use (always, never, if_required, stateless).

management.ssl.ciphers= # Supported SSL ciphers. Requires a custom management.port.

management.ssl.client-auth= # Whether client authentication is wanted ("want") or needed ("need"). Requires a trust store. Requires a custom management.port.

management.ssl.enabled= # Enable SSL support. Requires a custom management.port.

management.ssl.enabled-protocols= # Enabled SSL protocols. Requires a custom management.port.

management.ssl.key-alias= # Alias that identifies the key in the key store. Requires a custom management.port.

management.ssl.key-password= # Password used to access the key in the key store. Requires a custom management.port.

management.ssl.key-store= # Path to the key store that holds the SSL certificate (typically a jks file). Requires a custom management.port.

management.ssl.key-store-password= # Password used to access the key store. Requires a custom management.port.

management.ssl.key-store-provider= # Provider for the key store. Requires a custom management.port.

management.ssl.key-store-type= # Type of the key store. Requires a custom management.port.

management.ssl.protocol=TLS # SSL protocol to use. Requires a custom management.port.

management.ssl.trust-store= # Trust store that holds SSL certificates. Requires a custom management.port.

management.ssl.trust-store-password= # Password used to access the trust store. Requires a custom management.port.

management.ssl.trust-store-provider= # Provider for the trust store. Requires a custom management.port.

management.ssl.trust-store-type= # Type of the trust store. Requires a custom management.port.

 

# HEALTH INDICATORS

management.health.db.enabled=true # Enable database health check.

management.health.cassandra.enabled=true # Enable cassandra health check.

management.health.couchbase.enabled=true # Enable couchbase health check.

management.health.defaults.enabled=true # Enable default health indicators.

management.health.diskspace.enabled=true # Enable disk space health check.

management.health.diskspace.path= # Path used to compute the available disk space.

management.health.diskspace.threshold=0 # Minimum disk space that should be available, in bytes.

management.health.elasticsearch.enabled=true # Enable elasticsearch health check.

management.health.elasticsearch.indices= # Comma-separated index names.

management.health.elasticsearch.response-timeout=100 # The time, in milliseconds, to wait for a response from the cluster.

management.health.jms.enabled=true # Enable JMS health check.

management.health.ldap.enabled=true # Enable LDAP health check.

management.health.mail.enabled=true # Enable Mail health check.

management.health.mongo.enabled=true # Enable MongoDB health check.

management.health.rabbit.enabled=true # Enable RabbitMQ health check.

management.health.redis.enabled=true # Enable Redis health check.

management.health.solr.enabled=true # Enable Solr health check.

management.health.status.order=DOWN, OUT_OF_SERVICE, UP, UNKNOWN # Comma-separated list of health statuses in order of severity.

 

# INFO CONTRIBUTORS (InfoContributorProperties)

management.info.build.enabled=true # Enable build info.

management.info.defaults.enabled=true # Enable default info contributors.

management.info.env.enabled=true # Enable environment info.

management.info.git.enabled=true # Enable git info.

management.info.git.mode=simple # Mode to use to expose git information.

 

# REMOTE SHELL (ShellProperties)

management.shell.auth.type=simple # Authentication type. Auto-detected according to the environment.

management.shell.auth.jaas.domain=my-domain # JAAS domain.

management.shell.auth.key.path= # Path to the authentication key. This should point to a valid ".pem" file.

management.shell.auth.simple.user.name=user # Login user.

management.shell.auth.simple.user.password= # Login password.

management.shell.auth.spring.roles=ACTUATOR # Comma-separated list of required roles to login to the CRaSH console.

management.shell.command-path-patterns=classpath*:/commands/**,classpath*:/crash/commands/** # Patterns to use to look for commands.

management.shell.command-refresh-interval=-1 # Scan for changes and update the command if necessary (in seconds).

management.shell.config-path-patterns=classpath*:/crash/* # Patterns to use to look for configurations.

management.shell.disabled-commands=jpa*,jdbc*,jndi* # Comma-separated list of commands to disable.

management.shell.disabled-plugins= # Comma-separated list of plugins to disable. Certain plugins are disabled by default based on the environment.

management.shell.ssh.auth-timeout = # Number of milliseconds after user will be prompted to login again.

management.shell.ssh.enabled=true # Enable CRaSH SSH support.

management.shell.ssh.idle-timeout = # Number of milliseconds after which unused connections are closed.

management.shell.ssh.key-path= # Path to the SSH server key.

management.shell.ssh.port=2000 # SSH port.

management.shell.telnet.enabled=false # Enable CRaSH telnet support. Enabled by default if the TelnetPlugin is  available.

management.shell.telnet.port=5000 # Telnet port.

 

# TRACING (TraceProperties)

management.trace.include=request-headers,response-headers,cookies,errors # Items to be included in the trace.

 

# METRICS EXPORT (MetricExportProperties)

spring.metrics.export.aggregate.key-pattern= # Pattern that tells the aggregator what to do with the keys from the source repository.

spring.metrics.export.aggregate.prefix= # Prefix for global repository if active.

spring.metrics.export.delay-millis=5000 # Delay in milliseconds between export ticks. Metrics are exported to external sources on a schedule with this delay.

spring.metrics.export.enabled=true # Flag to enable metric export (assuming a MetricWriter is available).

spring.metrics.export.excludes= # List of patterns for metric names to exclude. Applied after the includes.

spring.metrics.export.includes= # List of patterns for metric names to include.

spring.metrics.export.redis.key=keys.spring.metrics # Key for redis repository export (if active).

spring.metrics.export.redis.prefix=spring.metrics # Prefix for redis repository if active.

spring.metrics.export.send-latest= # Flag to switch off any available optimizations based on not exporting unchanged metric values.

spring.metrics.export.statsd.host= # Host of a statsd server to receive exported metrics.

spring.metrics.export.statsd.port=8125 # Port of a statsd server to receive exported metrics.

spring.metrics.export.statsd.prefix= # Prefix for statsd exported metrics.

spring.metrics.export.triggers.*= # Specific trigger properties per MetricWriter bean name.

 

 

# ----------------------------------------

# DEVTOOLS PROPERTIES

# ----------------------------------------

 

# DEVTOOLS (DevToolsProperties)

spring.devtools.livereload.enabled=true # Enable a livereload.com compatible server.

spring.devtools.livereload.port=35729 # Server port.

spring.devtools.restart.additional-exclude= # Additional patterns that should be excluded from triggering a full restart.

spring.devtools.restart.additional-paths= # Additional paths to watch for changes.

spring.devtools.restart.enabled=true # Enable automatic restart.

spring.devtools.restart.exclude=META-INF/maven/**,META-INF/resources/**,resources/**,static/**,public/**,templates/**,**/*Test.class,**/*Tests.class,git.properties # Patterns that should be excluded from triggering a full restart.

spring.devtools.restart.poll-interval=1000 # Amount of time (in milliseconds) to wait between polling for classpath changes.

spring.devtools.restart.quiet-period=400 # Amount of quiet time (in milliseconds) required without any classpath changes before a restart is triggered.

spring.devtools.restart.trigger-file= # Name of a specific file that when changed will trigger the restart check. If not specified any classpath file change will trigger the restart.

 

# REMOTE DEVTOOLS (RemoteDevToolsProperties)

spring.devtools.remote.context-path=/.~~spring-boot!~ # Context path used to handle the remote connection.

spring.devtools.remote.debug.enabled=true # Enable remote debug support.

spring.devtools.remote.debug.local-port=8000 # Local remote debug server port.

spring.devtools.remote.proxy.host= # The host of the proxy to use to connect to the remote application.

spring.devtools.remote.proxy.port= # The port of the proxy to use to connect to the remote application.

spring.devtools.remote.restart.enabled=true # Enable remote restart.

spring.devtools.remote.secret= # A shared secret required to establish a connection (required to enable remote support).

spring.devtools.remote.secret-header-name=X-AUTH-TOKEN # HTTP header used to transfer the shared secret.

 

 

# ----------------------------------------

# TESTING PROPERTIES

# ----------------------------------------

 

spring.test.database.replace=any # Type of existing DataSource to replace.

spring.test.mockmvc.print=default # MVC Print option.