Python解包及反编译: PyInstaller Extractor+uncompyle6_pyinstaller解包

作者：Guff_9hys | 2024-08-15 07:05:18

踩

pyinstaller解包

Python解包及反编译: PyInstaller Extractor+uncompyle6

文章目录

Python解包及反编译: PyInstaller Extractor+uncompyle6
一、前言
二、PyInstaller Extractor解包
- 1、安装pyinstxtractor
- 2、解包
三、反编译uncompyle6工具使用
四、一键解包并编译

一、前言

有时候会遇到一些人制作一键安装包的时候会把一些程序封装进exe里面，但我们又想拿到里面源码的情况。在这里就涉及到了解包与反编译的。

二、PyInstaller Extractor解包

目前的python主流的打包方式是使用pyinstaller，针对这种情况可以使用pyinstaller Extractor进行解包。

前提
1. 使用pyinstaller进行打包
2. 未加密

1、安装pyinstxtractor

新建一个py文件pyinstxtractor.py,然后将下面的内容拷贝进去
然后就安装好了，要使用的时候与待解包的exe文件放在同一文件夹即可

"""
PyInstaller Extractor v2.0 (Supports pyinstaller 6.6.0, 6.5.0, 6.4.0, 6.3.0, 6.2.0, 6.1.0, 6.0.0, 5.13.2, 5.13.1, 5.13.0, 5.12.0, 5.11.0, 5.10.1, 5.10.0, 5.9.0, 5.8.0, 5.7.0, 5.6.2, 5.6.1, 5.6, 5.5, 5.4.1, 5.4, 5.3, 5.2, 5.1, 5.0.1, 5.0, 4.10, 4.9, 4.8, 4.7, 4.6, 4.5.1, 4.5, 4.4, 4.3, 4.2, 4.1, 4.0, 3.6, 3.5, 3.4, 3.3, 3.2, 3.1, 3.0, 2.1, 2.0)
Author : Extreme Coders
E-mail : extremecoders(at)hotmail(dot)com
Web    : https://0xec.blogspot.com
Date   : 26-March-2020
Url    : https://github.com/extremecoders-re/pyinstxtractor

For any suggestions, leave a comment on
https://forum.tuts4you.com/topic/34455-pyinstaller-extractor/

This script extracts a pyinstaller generated executable file.
Pyinstaller installation is not needed. The script has it all.

For best results, it is recommended to run this script in the
same version of python as was used to create the executable.
This is just to prevent unmarshalling errors(if any) while
extracting the PYZ archive.

Usage : Just copy this script to the directory where your exe resides
        and run the script with the exe file name as a parameter

C:\\path\\to\\exe\\>python pyinstxtractor.py <filename>
$ /path/to/exe/python pyinstxtractor.py <filename>

Licensed under GNU General Public License (GPL) v3.
You are free to modify this source.

CHANGELOG
================================================

Version 1.1 (Jan 28, 2014)
-------------------------------------------------
- First Release
- Supports only pyinstaller 2.0

Version 1.2 (Sept 12, 2015)
-------------------------------------------------
- Added support for pyinstaller 2.1 and 3.0 dev
- Cleaned up code
- Script is now more verbose
- Executable extracted within a dedicated sub-directory

(Support for pyinstaller 3.0 dev is experimental)

Version 1.3 (Dec 12, 2015)
-------------------------------------------------
- Added support for pyinstaller 3.0 final
- Script is compatible with both python 2.x & 3.x (Thanks to Moritz Kroll @ Avira Operations GmbH & Co. KG)

Version 1.4 (Jan 19, 2016)
-------------------------------------------------
- Fixed a bug when writing pyc files >= version 3.3 (Thanks to Daniello Alto: https://github.com/Djamana)

Version 1.5 (March 1, 2016)
-------------------------------------------------
- Added support for pyinstaller 3.1 (Thanks to Berwyn Hoyt for reporting)

Version 1.6 (Sept 5, 2016)
-------------------------------------------------
- Added support for pyinstaller 3.2
- Extractor will use a random name while extracting unnamed files.
- For encrypted pyz archives it will dump the contents as is. Previously, the tool would fail.

Version 1.7 (March 13, 2017)
-------------------------------------------------
- Made the script compatible with python 2.6 (Thanks to Ross for reporting)

Version 1.8 (April 28, 2017)
-------------------------------------------------
- Support for sub-directories in .pyz files (Thanks to Moritz Kroll @ Avira Operations GmbH & Co. KG)

Version 1.9 (November 29, 2017)
-------------------------------------------------
- Added support for pyinstaller 3.3
- Display the scripts which are run at entry (Thanks to Michael Gillespie @ malwarehunterteam for the feature request)

Version 2.0 (March 26, 2020)
-------------------------------------------------
- Project migrated to github
- Supports pyinstaller 3.6
- Added support for Python 3.7, 3.8
- The header of all extracted pyc's are now automatically fixed
"""

from __future__ import print_function
import os
import struct
import marshal
import zlib
import sys
from uuid import uuid4 as uniquename


class CTOCEntry:
    def __init__(self, position, cmprsdDataSize, uncmprsdDataSize, cmprsFlag, typeCmprsData, name):
        self.position = position
        self.cmprsdDataSize = cmprsdDataSize
        self.uncmprsdDataSize = uncmprsdDataSize
        self.cmprsFlag = cmprsFlag
        self.typeCmprsData = typeCmprsData
        self.name = name


class PyInstArchive:
    PYINST20_COOKIE_SIZE = 24           # For pyinstaller 2.0
    PYINST21_COOKIE_SIZE = 24 + 64      # For pyinstaller 2.1+
    MAGIC = b'MEI\014\013\012\013\016'  # Magic number which identifies pyinstaller

    def __init__(self, path):
        self.filePath = path
        self.pycMagic = b'\0' * 4
        self.barePycList = [] # List of pyc's whose headers have to be fixed


    def open(self):
        try:
            self.fPtr = open(self.filePath, 'rb')
            self.fileSize = os.stat(self.filePath).st_size
        except:
            print('[!] Error: Could not open {0}'.format(self.filePath))
            return False
        return True


    def close(self):
        try:
            self.fPtr.close()
        except:
            pass


    def checkFile(self):
        print('[+] Processing {0}'.format(self.filePath))

        searchChunkSize = 8192
        endPos = self.fileSize
        self.cookiePos = -1

        if endPos < len(self.MAGIC):
            print('[!] Error : File is too short or truncated')
            return False

        while True:
            startPos = endPos - searchChunkSize if endPos >= searchChunkSize else 0
            chunkSize = endPos - startPos

            if chunkSize < len(self.MAGIC):
                break

            self.fPtr.seek(startPos, os.SEEK_SET)
            data = self.fPtr.read(chunkSize)

            offs = data.rfind(self.MAGIC)

            if offs != -1:
                self.cookiePos = startPos + offs
                break

            endPos = startPos + len(self.MAGIC) - 1

            if startPos == 0:
                break

        if self.cookiePos == -1:
            print('[!] Error : Missing cookie, unsupported pyinstaller version or not a pyinstaller archive')
            return False

        self.fPtr.seek(self.cookiePos + self.PYINST20_COOKIE_SIZE, os.SEEK_SET)

        if b'python' in self.fPtr.read(64).lower():
            print('[+] Pyinstaller version: 2.1+')
            self.pyinstVer = 21     # pyinstaller 2.1+
        else:
            self.pyinstVer = 20     # pyinstaller 2.0
            print('[+] Pyinstaller version: 2.0')

        return True


    def getCArchiveInfo(self):
        try:
            if self.pyinstVer == 20:
                self.fPtr.seek(self.cookiePos, os.SEEK_SET)

                # Read CArchive cookie
                (magic, lengthofPackage, toc, tocLen, pyver) = \
                struct.unpack('!8siiii', self.fPtr.read(self.PYINST20_COOKIE_SIZE))

            elif self.pyinstVer == 21:
                self.fPtr.seek(self.cookiePos, os.SEEK_SET)

                # Read CArchive cookie
                (magic, lengthofPackage, toc, tocLen, pyver, pylibname) = \
                struct.unpack('!8sIIii64s', self.fPtr.read(self.PYINST21_COOKIE_SIZE))

        except:
            print('[!] Error : The file is not a pyinstaller archive')
            return False

        self.pymaj, self.pymin = (pyver//100, pyver%100) if pyver >= 100 else (pyver//10, pyver%10)
        print('[+] Python version: {0}.{1}'.format(self.pymaj, self.pymin))

        # Additional data after the cookie
        tailBytes = self.fileSize - self.cookiePos - (self.PYINST20_COOKIE_SIZE if self.pyinstVer == 20 else self.PYINST21_COOKIE_SIZE)

        # Overlay is the data appended at the end of the PE
        self.overlaySize = lengthofPackage + tailBytes
        self.overlayPos = self.fileSize - self.overlaySize
        self.tableOfContentsPos = self.overlayPos + toc
        self.tableOfContentsSize = tocLen

        print('[+] Length of package: {0} bytes'.format(lengthofPackage))
        return True


    def parseTOC(self):
        # Go to the table of contents
        self.fPtr.seek(self.tableOfContentsPos, os.SEEK_SET)

        self.tocList = []
        parsedLen = 0

        # Parse table of contents
        while parsedLen < self.tableOfContentsSize:
            (entrySize, ) = struct.unpack('!i', self.fPtr.read(4))
            nameLen = struct.calcsize('!iIIIBc')

            (entryPos, cmprsdDataSize, uncmprsdDataSize, cmprsFlag, typeCmprsData, name) = \
            struct.unpack( \
                '!IIIBc{0}s'.format(entrySize - nameLen), \
                self.fPtr.read(entrySize - 4))

            try:
                name = name.decode("utf-8").rstrip("\0")
            except UnicodeDecodeError:
                newName = str(uniquename())
                print('[!] Warning: File name {0} contains invalid bytes. Using random name {1}'.format(name, newName))
                name = newName
            
            # Prevent writing outside the extraction directory
            if name.startswith("/"):
                name = name.lstrip("/")

            if len(name) == 0:
                name = str(uniquename())
                print('[!] Warning: Found an unamed file in CArchive. Using random name {0}'.format(name))

            self.tocList.append( \
                                CTOCEntry(                      \
                                    self.overlayPos + entryPos, \
                                    cmprsdDataSize,             \
                                    uncmprsdDataSize,           \
                                    cmprsFlag,                  \
                                    typeCmprsData,              \
                                    name                        \
                                ))

            parsedLen += entrySize
        print('[+] Found {0} files in CArchive'.format(len(self.tocList)))


    def _writeRawData(self, filepath, data):
        nm = filepath.replace('\\', os.path.sep).replace('/', os.path.sep).replace('..', '__')
        nmDir = os.path.dirname(nm)
        if nmDir != '' and not os.path.exists(nmDir): # Check if path exists, create if not
            os.makedirs(nmDir)

        with open(nm, 'wb') as f:
            f.write(data)


    def extractFiles(self):
        print('[+] Beginning extraction...please standby')
        extractionDir = os.path.join(os.getcwd(), os.path.basename(self.filePath) + '_extracted')

        if not os.path.exists(extractionDir):
            os.mkdir(extractionDir)

        os.chdir(extractionDir)

        for entry in self.tocList:
            self.fPtr.seek(entry.position, os.SEEK_SET)
            data = self.fPtr.read(entry.cmprsdDataSize)

            if entry.cmprsFlag == 1:
                try:
                    data = zlib.decompress(data)
                except zlib.error:
                    print('[!] Error : Failed to decompress {0}'.format(entry.name))
                    continue
                # Malware may tamper with the uncompressed size
                # Comment out the assertion in such a case
                assert len(data) == entry.uncmprsdDataSize # Sanity Check

            if entry.typeCmprsData == b'd' or entry.typeCmprsData == b'o':
                # d -> ARCHIVE_ITEM_DEPENDENCY
                # o -> ARCHIVE_ITEM_RUNTIME_OPTION
                # These are runtime options, not files
                continue

            basePath = os.path.dirname(entry.name)
            if basePath != '':
                # Check if path exists, create if not
                if not os.path.exists(basePath):
                    os.makedirs(basePath)

            if entry.typeCmprsData == b's':
                # s -> ARCHIVE_ITEM_PYSOURCE
                # Entry point are expected to be python scripts
                print('[+] Possible entry point: {0}.pyc'.format(entry.name))

                if self.pycMagic == b'\0' * 4:
                    # if we don't have the pyc header yet, fix them in a later pass
                    self.barePycList.append(entry.name + '.pyc')
                self._writePyc(entry.name + '.pyc', data)

            elif entry.typeCmprsData == b'M' or entry.typeCmprsData == b'm':
                # M -> ARCHIVE_ITEM_PYPACKAGE
                # m -> ARCHIVE_ITEM_PYMODULE
                # packages and modules are pyc files with their header intact

                # From PyInstaller 5.3 and above pyc headers are no longer stored
                # https://github.com/pyinstaller/pyinstaller/commit/a97fdf
                if data[2:4] == b'\r\n':
                    # < pyinstaller 5.3
                    if self.pycMagic == b'\0' * 4: 
                        self.pycMagic = data[0:4]
                    self._writeRawData(entry.name + '.pyc', data)

                else:
                    # >= pyinstaller 5.3
                    if self.pycMagic == b'\0' * 4:
                        # if we don't have the pyc header yet, fix them in a later pass
                        self.barePycList.append(entry.name + '.pyc')

                    self._writePyc(entry.name + '.pyc', data)

            else:
                self._writeRawData(entry.name, data)

                if entry.typeCmprsData == b'z' or entry.typeCmprsData == b'Z':
                    self._extractPyz(entry.name)

        # Fix bare pyc's if any
        self._fixBarePycs()


    def _fixBarePycs(self):
        for pycFile in self.barePycList:
            with open(pycFile, 'r+b') as pycFile:
                # Overwrite the first four bytes
                pycFile.write(self.pycMagic)


    def _writePyc(self, filename, data):
        with open(filename, 'wb') as pycFile:
            pycFile.write(self.pycMagic)            # pyc magic

            if self.pymaj >= 3 and self.pymin >= 7:                # PEP 552 -- Deterministic pycs
                pycFile.write(b'\0' * 4)        # Bitfield
                pycFile.write(b'\0' * 8)        # (Timestamp + size) || hash 

            else:
                pycFile.write(b'\0' * 4)      # Timestamp
                if self.pymaj >= 3 and self.pymin >= 3:
                    pycFile.write(b'\0' * 4)  # Size parameter added in Python 3.3

            pycFile.write(data)


    def _extractPyz(self, name):
        dirName =  name + '_extracted'
        # Create a directory for the contents of the pyz
        if not os.path.exists(dirName):
            os.mkdir(dirName)

        with open(name, 'rb') as f:
            pyzMagic = f.read(4)
            assert pyzMagic == b'PYZ\0' # Sanity Check

            pyzPycMagic = f.read(4) # Python magic value

            if self.pycMagic == b'\0' * 4:
                self.pycMagic = pyzPycMagic

            elif self.pycMagic != pyzPycMagic:
                self.pycMagic = pyzPycMagic
                print('[!] Warning: pyc magic of files inside PYZ archive are different from those in CArchive')

            # Skip PYZ extraction if not running under the same python version
            if self.pymaj != sys.version_info.major or self.pymin != sys.version_info.minor:
                print('[!] Warning: This script is running in a different Python version than the one used to build the executable.')
                print('[!] Please run this script in Python {0}.{1} to prevent extraction errors during unmarshalling'.format(self.pymaj, self.pymin))
                print('[!] Skipping pyz extraction')
                return

            (tocPosition, ) = struct.unpack('!i', f.read(4))
            f.seek(tocPosition, os.SEEK_SET)

            try:
                toc = marshal.load(f)
            except:
                print('[!] Unmarshalling FAILED. Cannot extract {0}. Extracting remaining files.'.format(name))
                return

            print('[+] Found {0} files in PYZ archive'.format(len(toc)))

            # From pyinstaller 3.1+ toc is a list of tuples
            if type(toc) == list:
                toc = dict(toc)

            for key in toc.keys():
                (ispkg, pos, length) = toc[key]
                f.seek(pos, os.SEEK_SET)
                fileName = key

                try:
                    # for Python > 3.3 some keys are bytes object some are str object
                    fileName = fileName.decode('utf-8')
                except:
                    pass

                # Prevent writing outside dirName
                fileName = fileName.replace('..', '__').replace('.', os.path.sep)

                if ispkg == 1:
                    filePath = os.path.join(dirName, fileName, '__init__.pyc')

                else:
                    filePath = os.path.join(dirName, fileName + '.pyc')

                fileDir = os.path.dirname(filePath)
                if not os.path.exists(fileDir):
                    os.makedirs(fileDir)

                try:
                    data = f.read(length)
                    data = zlib.decompress(data)
                except:
                    print('[!] Error: Failed to decompress {0}, probably encrypted. Extracting as is.'.format(filePath))
                    open(filePath + '.encrypted', 'wb').write(data)
                else:
                    self._writePyc(filePath, data)


def main():
    if len(sys.argv) < 2:
        print('[+] Usage: pyinstxtractor.py <filename>')

    else:
        arch = PyInstArchive(sys.argv[1])
        if arch.open():
            if arch.checkFile():
                if arch.getCArchiveInfo():
                    arch.parseTOC()
                    arch.extractFiles()
                    arch.close()
                    print('[+] Successfully extracted pyinstaller archive: {0}'.format(sys.argv[1]))
                    print('')
                    print('You can now use a python decompiler on the pyc files within the extracted directory')
                    return

            arch.close()


if __name__ == '__main__':
    main()
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468

2、解包

在使用前：
将需解包的exe与下载的pyinstxtractor.py存入同级文件夹
在这里插入图片描述
使用命令行输入如下指令, 得到exe的解包文件夹.

python pyinstxtractor.py {exe路径}
示例: python pyinstxtractor.py CreatFoder.exe
1
2

运行结果：
在这里插入图片描述
解包后文件放在以exe名字+_extracted的文件夹中

三、反编译uncompyle6工具使用

目前代码还不能用，打开会看到基本全是乱码。
在这里需要对在线pyc,pyo,pyd文件等进行反编译成py文件

1、pip安装uncompyle6

pip install uncompyle6
1

2、找到主文件并编译

在这里插入图片描述
主文件的命名一般与其他库不同，有比较明显的开发者个人特征，且后缀通常是pyc。
找到之后再同级目录下输入命令行执行

uncompyle6.exe {pyc文件} >{py文件输出路径}

示例
在这里插入图片描述

3、解压完成查看源码

无乱码，一切正常
在这里插入图片描述

四、一键解包并编译

很多时候我们对于解包和编译是同一流程的。为了加快获取目标源码这一步骤，我将解包和编译的流程集中了起来，源码如下：

新建一个py文件：pyinstxtractorV2.py

"""
PyInstaller Extractor v2.0 (Supports pyinstaller 6.6.0, 6.5.0, 6.4.0, 6.3.0, 6.2.0, 6.1.0, 6.0.0, 5.13.2, 5.13.1, 5.13.0, 5.12.0, 5.11.0, 5.10.1, 5.10.0, 5.9.0, 5.8.0, 5.7.0, 5.6.2, 5.6.1, 5.6, 5.5, 5.4.1, 5.4, 5.3, 5.2, 5.1, 5.0.1, 5.0, 4.10, 4.9, 4.8, 4.7, 4.6, 4.5.1, 4.5, 4.4, 4.3, 4.2, 4.1, 4.0, 3.6, 3.5, 3.4, 3.3, 3.2, 3.1, 3.0, 2.1, 2.0)
Author : Extreme Coders
E-mail : extremecoders(at)hotmail(dot)com
Web    : https://0xec.blogspot.com
Date   : 26-March-2020
Url    : https://github.com/extremecoders-re/pyinstxtractor

For any suggestions, leave a comment on
https://forum.tuts4you.com/topic/34455-pyinstaller-extractor/

This script extracts a pyinstaller generated executable file.
Pyinstaller installation is not needed. The script has it all.

For best results, it is recommended to run this script in the
same version of python as was used to create the executable.
This is just to prevent unmarshalling errors(if any) while
extracting the PYZ archive.

Usage : Just copy this script to the directory where your exe resides
        and run the script with the exe file name as a parameter

C:\\path\\to\\exe\\>python pyinstxtractor.py <filename>
$ /path/to/exe/python pyinstxtractor.py <filename>

Licensed under GNU General Public License (GPL) v3.
You are free to modify this source.

CHANGELOG
================================================

Version 1.1 (Jan 28, 2014)
-------------------------------------------------
- First Release
- Supports only pyinstaller 2.0

Version 1.2 (Sept 12, 2015)
-------------------------------------------------
- Added support for pyinstaller 2.1 and 3.0 dev
- Cleaned up code
- Script is now more verbose
- Executable extracted within a dedicated sub-directory

(Support for pyinstaller 3.0 dev is experimental)

Version 1.3 (Dec 12, 2015)
-------------------------------------------------
- Added support for pyinstaller 3.0 final
- Script is compatible with both python 2.x & 3.x (Thanks to Moritz Kroll @ Avira Operations GmbH & Co. KG)

Version 1.4 (Jan 19, 2016)
-------------------------------------------------
- Fixed a bug when writing pyc files >= version 3.3 (Thanks to Daniello Alto: https://github.com/Djamana)

Version 1.5 (March 1, 2016)
-------------------------------------------------
- Added support for pyinstaller 3.1 (Thanks to Berwyn Hoyt for reporting)

Version 1.6 (Sept 5, 2016)
-------------------------------------------------
- Added support for pyinstaller 3.2
- Extractor will use a random name while extracting unnamed files.
- For encrypted pyz archives it will dump the contents as is. Previously, the tool would fail.

Version 1.7 (March 13, 2017)
-------------------------------------------------
- Made the script compatible with python 2.6 (Thanks to Ross for reporting)

Version 1.8 (April 28, 2017)
-------------------------------------------------
- Support for sub-directories in .pyz files (Thanks to Moritz Kroll @ Avira Operations GmbH & Co. KG)

Version 1.9 (November 29, 2017)
-------------------------------------------------
- Added support for pyinstaller 3.3
- Display the scripts which are run at entry (Thanks to Michael Gillespie @ malwarehunterteam for the feature request)

Version 2.0 (March 26, 2020)
-------------------------------------------------
- Project migrated to github
- Supports pyinstaller 3.6
- Added support for Python 3.7, 3.8
- The header of all extracted pyc's are now automatically fixed
"""

from __future__ import print_function
import os
import struct
import marshal
import zlib
import sys
from uuid import uuid4 as uniquename


class CTOCEntry:
    def __init__(self, position, cmprsdDataSize, uncmprsdDataSize, cmprsFlag, typeCmprsData, name):
        self.position = position
        self.cmprsdDataSize = cmprsdDataSize
        self.uncmprsdDataSize = uncmprsdDataSize
        self.cmprsFlag = cmprsFlag
        self.typeCmprsData = typeCmprsData
        self.name = name


class PyInstArchive:
    PYINST20_COOKIE_SIZE = 24  # For pyinstaller 2.0
    PYINST21_COOKIE_SIZE = 24 + 64  # For pyinstaller 2.1+
    MAGIC = b'MEI\014\013\012\013\016'  # Magic number which identifies pyinstaller

    def __init__(self, path):
        self.filePath = path
        self.pycMagic = b'\0' * 4
        self.barePycList = []  # List of pyc's whose headers have to be fixed

    def open(self):
        try:
            self.fPtr = open(self.filePath, 'rb')
            self.fileSize = os.stat(self.filePath).st_size
        except:
            print('[!] Error: Could not open {0}'.format(self.filePath))
            return False
        return True

    def close(self):
        try:
            self.fPtr.close()
        except:
            pass

    def checkFile(self):
        print('[+] Processing {0}'.format(self.filePath))

        searchChunkSize = 8192
        endPos = self.fileSize
        self.cookiePos = -1

        if endPos < len(self.MAGIC):
            print('[!] Error : File is too short or truncated')
            return False

        while True:
            startPos = endPos - searchChunkSize if endPos >= searchChunkSize else 0
            chunkSize = endPos - startPos

            if chunkSize < len(self.MAGIC):
                break

            self.fPtr.seek(startPos, os.SEEK_SET)
            data = self.fPtr.read(chunkSize)

            offs = data.rfind(self.MAGIC)

            if offs != -1:
                self.cookiePos = startPos + offs
                break

            endPos = startPos + len(self.MAGIC) - 1

            if startPos == 0:
                break

        if self.cookiePos == -1:
            print('[!] Error : Missing cookie, unsupported pyinstaller version or not a pyinstaller archive')
            return False

        self.fPtr.seek(self.cookiePos + self.PYINST20_COOKIE_SIZE, os.SEEK_SET)

        if b'python' in self.fPtr.read(64).lower():
            print('[+] Pyinstaller version: 2.1+')
            self.pyinstVer = 21  # pyinstaller 2.1+
        else:
            self.pyinstVer = 20  # pyinstaller 2.0
            print('[+] Pyinstaller version: 2.0')

        return True

    def getCArchiveInfo(self):
        try:
            if self.pyinstVer == 20:
                self.fPtr.seek(self.cookiePos, os.SEEK_SET)

                # Read CArchive cookie
                (magic, lengthofPackage, toc, tocLen, pyver) = \
                    struct.unpack('!8siiii', self.fPtr.read(self.PYINST20_COOKIE_SIZE))

            elif self.pyinstVer == 21:
                self.fPtr.seek(self.cookiePos, os.SEEK_SET)

                # Read CArchive cookie
                (magic, lengthofPackage, toc, tocLen, pyver, pylibname) = \
                    struct.unpack('!8sIIii64s', self.fPtr.read(self.PYINST21_COOKIE_SIZE))

        except:
            print('[!] Error : The file is not a pyinstaller archive')
            return False

        self.pymaj, self.pymin = (pyver // 100, pyver % 100) if pyver >= 100 else (pyver // 10, pyver % 10)
        print('[+] Python version: {0}.{1}'.format(self.pymaj, self.pymin))

        # Additional data after the cookie
        tailBytes = self.fileSize - self.cookiePos - (
            self.PYINST20_COOKIE_SIZE if self.pyinstVer == 20 else self.PYINST21_COOKIE_SIZE)

        # Overlay is the data appended at the end of the PE
        self.overlaySize = lengthofPackage + tailBytes
        self.overlayPos = self.fileSize - self.overlaySize
        self.tableOfContentsPos = self.overlayPos + toc
        self.tableOfContentsSize = tocLen

        print('[+] Length of package: {0} bytes'.format(lengthofPackage))
        return True

    def parseTOC(self):
        # Go to the table of contents
        self.fPtr.seek(self.tableOfContentsPos, os.SEEK_SET)

        self.tocList = []
        parsedLen = 0

        # Parse table of contents
        while parsedLen < self.tableOfContentsSize:
            (entrySize,) = struct.unpack('!i', self.fPtr.read(4))
            nameLen = struct.calcsize('!iIIIBc')

            (entryPos, cmprsdDataSize, uncmprsdDataSize, cmprsFlag, typeCmprsData, name) = \
                struct.unpack( \
                    '!IIIBc{0}s'.format(entrySize - nameLen), \
                    self.fPtr.read(entrySize - 4))

            try:
                name = name.decode("utf-8").rstrip("\0")
            except UnicodeDecodeError:
                newName = str(uniquename())
                print('[!] Warning: File name {0} contains invalid bytes. Using random name {1}'.format(name, newName))
                name = newName

            # Prevent writing outside the extraction directory
            if name.startswith("/"):
                name = name.lstrip("/")

            if len(name) == 0:
                name = str(uniquename())
                print('[!] Warning: Found an unamed file in CArchive. Using random name {0}'.format(name))

            self.tocList.append( \
                CTOCEntry( \
                    self.overlayPos + entryPos, \
                    cmprsdDataSize, \
                    uncmprsdDataSize, \
                    cmprsFlag, \
                    typeCmprsData, \
                    name \
                    ))

            parsedLen += entrySize
        print('[+] Found {0} files in CArchive'.format(len(self.tocList)))

    def _writeRawData(self, filepath, data):
        nm = filepath.replace('\\', os.path.sep).replace('/', os.path.sep).replace('..', '__')
        nmDir = os.path.dirname(nm)
        if nmDir != '' and not os.path.exists(nmDir):  # Check if path exists, create if not
            os.makedirs(nmDir)

        with open(nm, 'wb') as f:
            f.write(data)

    def extractFiles(self):
        print('[+] Beginning extraction...please standby')
        extractionDir = os.path.join(os.getcwd(), os.path.basename(self.filePath) + '_extracted')

        if not os.path.exists(extractionDir):
            os.mkdir(extractionDir)

        os.chdir(extractionDir)

        for entry in self.tocList:
            self.fPtr.seek(entry.position, os.SEEK_SET)
            data = self.fPtr.read(entry.cmprsdDataSize)

            if entry.cmprsFlag == 1:
                try:
                    data = zlib.decompress(data)
                except zlib.error:
                    print('[!] Error : Failed to decompress {0}'.format(entry.name))
                    continue
                # Malware may tamper with the uncompressed size
                # Comment out the assertion in such a case
                assert len(data) == entry.uncmprsdDataSize  # Sanity Check

            if entry.typeCmprsData == b'd' or entry.typeCmprsData == b'o':
                # d -> ARCHIVE_ITEM_DEPENDENCY
                # o -> ARCHIVE_ITEM_RUNTIME_OPTION
                # These are runtime options, not files
                continue

            basePath = os.path.dirname(entry.name)
            if basePath != '':
                # Check if path exists, create if not
                if not os.path.exists(basePath):
                    os.makedirs(basePath)

            if entry.typeCmprsData == b's':
                # s -> ARCHIVE_ITEM_PYSOURCE
                # Entry point are expected to be python scripts
                print('[+] Possible entry point: {0}.pyc'.format(entry.name))

                if self.pycMagic == b'\0' * 4:
                    # if we don't have the pyc header yet, fix them in a later pass
                    self.barePycList.append(entry.name + '.pyc')
                self._writePyc(entry.name + '.pyc', data)

            elif entry.typeCmprsData == b'M' or entry.typeCmprsData == b'm':
                # M -> ARCHIVE_ITEM_PYPACKAGE
                # m -> ARCHIVE_ITEM_PYMODULE
                # packages and modules are pyc files with their header intact

                # From PyInstaller 5.3 and above pyc headers are no longer stored
                # https://github.com/pyinstaller/pyinstaller/commit/a97fdf
                if data[2:4] == b'\r\n':
                    # < pyinstaller 5.3
                    if self.pycMagic == b'\0' * 4:
                        self.pycMagic = data[0:4]
                    self._writeRawData(entry.name + '.pyc', data)

                else:
                    # >= pyinstaller 5.3
                    if self.pycMagic == b'\0' * 4:
                        # if we don't have the pyc header yet, fix them in a later pass
                        self.barePycList.append(entry.name + '.pyc')

                    self._writePyc(entry.name + '.pyc', data)

            else:
                self._writeRawData(entry.name, data)

                if entry.typeCmprsData == b'z' or entry.typeCmprsData == b'Z':
                    self._extractPyz(entry.name)

        # Fix bare pyc's if any
        self._fixBarePycs()

    def _fixBarePycs(self):
        for pycFile in self.barePycList:
            with open(pycFile, 'r+b') as pycFile:
                # Overwrite the first four bytes
                pycFile.write(self.pycMagic)

    def _writePyc(self, filename, data):
        with open(filename, 'wb') as pycFile:
            pycFile.write(self.pycMagic)  # pyc magic

            if self.pymaj >= 3 and self.pymin >= 7:  # PEP 552 -- Deterministic pycs
                pycFile.write(b'\0' * 4)  # Bitfield
                pycFile.write(b'\0' * 8)  # (Timestamp + size) || hash

            else:
                pycFile.write(b'\0' * 4)  # Timestamp
                if self.pymaj >= 3 and self.pymin >= 3:
                    pycFile.write(b'\0' * 4)  # Size parameter added in Python 3.3

            pycFile.write(data)

    def _extractPyz(self, name):
        dirName = name + '_extracted'
        # Create a directory for the contents of the pyz
        if not os.path.exists(dirName):
            os.mkdir(dirName)

        with open(name, 'rb') as f:
            pyzMagic = f.read(4)
            assert pyzMagic == b'PYZ\0'  # Sanity Check

            pyzPycMagic = f.read(4)  # Python magic value

            if self.pycMagic == b'\0' * 4:
                self.pycMagic = pyzPycMagic

            elif self.pycMagic != pyzPycMagic:
                self.pycMagic = pyzPycMagic
                print('[!] Warning: pyc magic of files inside PYZ archive are different from those in CArchive')

            # Skip PYZ extraction if not running under the same python version
            if self.pymaj != sys.version_info.major or self.pymin != sys.version_info.minor:
                print(
                    '[!] Warning: This script is running in a different Python version than the one used to build the executable.')
                print(
                    '[!] Please run this script in Python {0}.{1} to prevent extraction errors during unmarshalling'.format(
                        self.pymaj, self.pymin))
                print('[!] Skipping pyz extraction')
                return

            (tocPosition,) = struct.unpack('!i', f.read(4))
            f.seek(tocPosition, os.SEEK_SET)

            try:
                toc = marshal.load(f)
            except:
                print('[!] Unmarshalling FAILED. Cannot extract {0}. Extracting remaining files.'.format(name))
                return

            print('[+] Found {0} files in PYZ archive'.format(len(toc)))

            # From pyinstaller 3.1+ toc is a list of tuples
            if type(toc) == list:
                toc = dict(toc)

            for key in toc.keys():
                (ispkg, pos, length) = toc[key]
                f.seek(pos, os.SEEK_SET)
                fileName = key

                try:
                    # for Python > 3.3 some keys are bytes object some are str object
                    fileName = fileName.decode('utf-8')
                except:
                    pass

                # Prevent writing outside dirName
                fileName = fileName.replace('..', '__').replace('.', os.path.sep)

                if ispkg == 1:
                    filePath = os.path.join(dirName, fileName, '__init__.pyc')

                else:
                    filePath = os.path.join(dirName, fileName + '.pyc')

                fileDir = os.path.dirname(filePath)
                if not os.path.exists(fileDir):
                    os.makedirs(fileDir)

                try:
                    data = f.read(length)
                    data = zlib.decompress(data)
                except:
                    print('[!] Error: Failed to decompress {0}, probably encrypted. Extracting as is.'.format(filePath))
                    open(filePath + '.encrypted', 'wb').write(data)
                else:
                    self._writePyc(filePath, data)


def main():
    if len(sys.argv) < 2:
        print('[+] Usage: pyinstxtractor.py <filename>')

    else:
        arch = PyInstArchive(sys.argv[1])
        if arch.open():
            if arch.checkFile():
                if arch.getCArchiveInfo():
                    arch.parseTOC()
                    arch.extractFiles()
                    arch.close()
                    print('[+] Successfully extracted pyinstaller archive: {0}'.format(sys.argv[1]))
                    print('')
                    print('You can now use a python decompiler on the pyc files within the extracted directory')
                    return

            arch.close()

import subprocess,os,concurrent.futures
def handle(filePath):
    try:
        # 定义要执行的命令
        command = "uncompyle6 {} >{}".format(filePath, filePath.replace('pyc', 'py'))

        # 使用subprocess模块执行命令
        process = subprocess.Popen(command, shell=True)
        process.wait()  # 等待命令执行完成
        print(command)
        os.remove(filePath)
        return True
    except Exception as e:
        print(e)
        return False
def excutor():
    print('检查是否已安装uncompyle6')
    # 检查是否已安装uncompyle6
    try:
        subprocess.check_output(['uncompyle6', '--version'])
        print("uncompyle6 is already installed.")
    except (subprocess.CalledProcessError,FileNotFoundError):
        print("uncompyle6 is not installed. Installing...")
        subprocess.call(['pip', 'install', 'uncompyle6'])
    currentPath=os.path.dirname(os.path.abspath(__file__))
    targe=os.path.basename(sys.argv[1])

    print('解包完成，开始反编译')
    targeDir=os.path.join(currentPath,targe+'_extracted')
    with concurrent.futures.ThreadPoolExecutor(max_workers=8) as excutor:
        futures=[]
        for root,dirs,files in os.walk(targeDir):
            for file in files:

                filePath=os.path.join(root,file)
                if filePath.endswith('pyc'):
                    task =excutor.submit(handle,filePath)
                    futures.append(task)

        for future in concurrent.futures.as_completed(futures):
            ret=future.result()


if __name__ == '__main__':
    main()
    excutor()
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505

使用
将pyinstxtractorV2.py文件与待处理的exe文件放置在同一目录并执行：
示例：python .\pyinstxtractorV2.py .\manager232.exe

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/Guff_9hys/article/detail/982482