curl常用方法_curl doh

1.curl 用法

	Usage: curl [options...] <url>
	     --abstract-unix-socket <path> Connect via abstract Unix domain socket
	     --alt-svc <file name> Enable alt-svc with this cache file
	     --anyauth       Pick any authentication method
	 -a, --append        Append to target file when uploading
	     --basic         Use HTTP Basic Authentication
	     --cacert <file> CA certificate to verify peer against
	     --capath <dir>  CA directory to verify peer against
	 -E, --cert <certificate[:password]> Client certificate file and password
	     --cert-status   Verify the status of the server certificate
	     --cert-type <type> Certificate file type (DER/PEM/ENG)
	     --ciphers <list of ciphers> SSL ciphers to use
	     --compressed    Request compressed response
	     --compressed-ssh Enable SSH compression
	 -K, --config <file> Read config from a file
	     --connect-timeout <seconds> Maximum time allowed for connection
	     --connect-to <HOST1:PORT1:HOST2:PORT2> Connect to host
	 -C, --continue-at <offset> Resumed transfer offset
	 -b, --cookie <data|filename> Send cookies from string/file
	 -c, --cookie-jar <filename> Write cookies to <filename> after operation
	     --create-dirs   Create necessary local directory hierarchy
	     --crlf          Convert LF to CRLF in upload
	     --crlfile <file> Get a CRL list in PEM format from the given file
	 -d, --data <data>   HTTP POST data
	     --data-ascii <data> HTTP POST ASCII data
	     --data-binary <data> HTTP POST binary data
	     --data-raw <data> HTTP POST data, '@' allowed
	     --data-urlencode <data> HTTP POST data url encoded
	     --delegation <LEVEL> GSS-API delegation permission
	     --digest        Use HTTP Digest Authentication
	 -q, --disable       Disable .curlrc
	     --disable-eprt  Inhibit using EPRT or LPRT
	     --disable-epsv  Inhibit using EPSV
	     --disallow-username-in-url Disallow username in url
	     --dns-interface <interface> Interface to use for DNS requests
	     --dns-ipv4-addr <address> IPv4 address to use for DNS requests
	     --dns-ipv6-addr <address> IPv6 address to use for DNS requests
	     --dns-servers <addresses> DNS server addrs to use
	     --doh-url <URL> Resolve host names over DOH
	 -D, --dump-header <filename> Write the received headers to <filename>
	     --egd-file <file> EGD socket path for random data
	     --engine <name> Crypto engine to use
	     --expect100-timeout <seconds> How long to wait for 100-continue
	 -f, --fail          Fail silently (no output at all) on HTTP errors
	     --fail-early    Fail on first transfer error, do not continue
	     --false-start   Enable TLS False Start
	 -F, --form <name=content> Specify multipart MIME data
	     --form-string <name=string> Specify multipart MIME data
	     --ftp-account <data> Account data string
	     --ftp-alternative-to-user <command> String to replace USER [name]
	     --ftp-create-dirs Create the remote dirs if not present
	     --ftp-method <method> Control CWD usage
	     --ftp-pasv      Use PASV/EPSV instead of PORT
	 -P, --ftp-port <address> Use PORT instead of PASV
	     --ftp-pret      Send PRET before PASV
	     --ftp-skip-pasv-ip Skip the IP address for PASV
	     --ftp-ssl-ccc   Send CCC after authenticating
	     --ftp-ssl-ccc-mode <active/passive> Set CCC mode
	     --ftp-ssl-control Require SSL/TLS for FTP login, clear for transfer
	 -G, --get           Put the post data in the URL and use GET
	 -g, --globoff       Disable URL sequences and ranges using {} and []
	     --happy-eyeballs-timeout-ms <milliseconds> How long to wait in milliseconds for IPv6 before trying IPv4
	     --haproxy-protocol Send HAProxy PROXY protocol v1 header
	 -I, --head          Show document info only
	 -H, --header <header/@file> Pass custom header(s) to server
	 -h, --help          This help text
	     --hostpubmd5 <md5> Acceptable MD5 hash of the host public key
	     --http0.9       Allow HTTP 0.9 responses
	 -0, --http1.0       Use HTTP 1.0
	     --http1.1       Use HTTP 1.1
	     --http2         Use HTTP 2
	     --http2-prior-knowledge Use HTTP 2 without HTTP/1.1 Upgrade
	     --ignore-content-length Ignore the size of the remote resource
	 -i, --include       Include protocol response headers in the output
	 -k, --insecure      Allow insecure server connections when using SSL
	     --interface <name> Use network INTERFACE (or address)
	 -4, --ipv4          Resolve names to IPv4 addresses
	 -6, --ipv6          Resolve names to IPv6 addresses
	 -j, --junk-session-cookies Ignore session cookies read from file
	     --keepalive-time <seconds> Interval time for keepalive probes
	     --key <key>     Private key file name
	     --key-type <type> Private key file type (DER/PEM/ENG)
	     --krb <level>   Enable Kerberos with security <level>
	     --libcurl <file> Dump libcurl equivalent code of this command line
	     --limit-rate <speed> Limit transfer speed to RATE
	 -l, --list-only     List only mode
	     --local-port <num/range> Force use of RANGE for local port numbers
	 -L, --location      Follow redirects
	     --location-trusted Like --location, and send auth to other hosts
	     --login-options <options> Server login options
	     --mail-auth <address> Originator address of the original email
	     --mail-from <address> Mail from this address
	     --mail-rcpt <address> Mail to this address
	 -M, --manual        Display the full manual
	     --max-filesize <bytes> Maximum file size to download
	     --max-redirs <num> Maximum number of redirects allowed
	 -m, --max-time <seconds> Maximum time allowed for the transfer
	     --metalink      Process given URLs as metalink XML file
	     --negotiate     Use HTTP Negotiate (SPNEGO) authentication
	 -n, --netrc         Must read .netrc for user name and password
	     --netrc-file <filename> Specify FILE for netrc
	     --netrc-optional Use either .netrc or URL
	 -:, --next          Make next URL use its separate set of options
	     --no-alpn       Disable the ALPN TLS extension
	 -N, --no-buffer     Disable buffering of the output stream
	     --no-keepalive  Disable TCP keepalive on the connection
	     --no-npn        Disable the NPN TLS extension
	     --no-sessionid  Disable SSL session-ID reusing
	     --noproxy <no-proxy-list> List of hosts which do not use proxy
	     --ntlm          Use HTTP NTLM authentication
	     --ntlm-wb       Use HTTP NTLM authentication with winbind
	     --oauth2-bearer <token> OAuth 2 Bearer Token
	 -o, --output <file> Write to file instead of stdout
	     --pass <phrase> Pass phrase for the private key
	     --path-as-is    Do not squash .. sequences in URL path
	     --pinnedpubkey <hashes> FILE/HASHES Public key to verify peer against
	     --post301       Do not switch to GET after following a 301
	     --post302       Do not switch to GET after following a 302
	     --post303       Do not switch to GET after following a 303
	     --preproxy [protocol://]host[:port] Use this proxy first
	 -#, --progress-bar  Display transfer progress as a bar
	     --proto <protocols> Enable/disable PROTOCOLS
	     --proto-default <protocol> Use PROTOCOL for any URL missing a scheme
	     --proto-redir <protocols> Enable/disable PROTOCOLS on redirect
	 -x, --proxy [protocol://]host[:port] Use this proxy
	     --proxy-anyauth Pick any proxy authentication method
	     --proxy-basic   Use Basic authentication on the proxy
	     --proxy-cacert <file> CA certificate to verify peer against for proxy
	     --proxy-capath <dir> CA directory to verify peer against for proxy
	     --proxy-cert <cert[:passwd]> Set client certificate for proxy
	     --proxy-cert-type <type> Client certificate type for HTTPS proxy
	     --proxy-ciphers <list> SSL ciphers to use for proxy
	     --proxy-crlfile <file> Set a CRL list for proxy
	     --proxy-digest  Use Digest authentication on the proxy
	     --proxy-header <header/@file> Pass custom header(s) to proxy
	     --proxy-insecure Do HTTPS proxy connections without verifying the proxy
	     --proxy-key <key> Private key for HTTPS proxy
	     --proxy-key-type <type> Private key file type for proxy
	     --proxy-negotiate Use HTTP Negotiate (SPNEGO) authentication on the proxy
	     --proxy-ntlm    Use NTLM authentication on the proxy
	     --proxy-pass <phrase> Pass phrase for the private key for HTTPS proxy
	     --proxy-pinnedpubkey <hashes> FILE/HASHES public key to verify proxy with
	     --proxy-service-name <name> SPNEGO proxy service name
	     --proxy-ssl-allow-beast Allow security flaw for interop for HTTPS proxy
	     --proxy-tls13-ciphers <ciphersuite list> TLS 1.3 proxy cipher suites
	     --proxy-tlsauthtype <type> TLS authentication type for HTTPS proxy
	     --proxy-tlspassword <string> TLS password for HTTPS proxy
	     --proxy-tlsuser <name> TLS username for HTTPS proxy
	     --proxy-tlsv1   Use TLSv1 for HTTPS proxy
	 -U, --proxy-user <user:password> Proxy user and password
	     --proxy1.0 <host[:port]> Use HTTP/1.0 proxy on given port
	 -p, --proxytunnel   Operate through an HTTP proxy tunnel (using CONNECT)
	     --pubkey <key>  SSH Public key file name
	 -Q, --quote         Send command(s) to server before transfer
	     --random-file <file> File for reading random data from
	 -r, --range <range> Retrieve only the bytes within RANGE
	     --raw           Do HTTP "raw"; no transfer decoding
	 -e, --referer <URL> Referrer URL
	 -J, --remote-header-name Use the header-provided filename
	 -O, --remote-name   Write output to a file named as the remote file
	     --remote-name-all Use the remote file name for all URLs
	 -R, --remote-time   Set the remote file's time on the local output
	 -X, --request <command> Specify request command to use
	     --request-target Specify the target for this request
	     --resolve <host:port:address[,address]...> Resolve the host+port to this address
	     --retry <num>   Retry request if transient problems occur
	     --retry-connrefused Retry on connection refused (use with --retry)
	     --retry-delay <seconds> Wait time between retries
	     --retry-max-time <seconds> Retry only within this period
	     --sasl-ir       Enable initial response in SASL authentication
	     --service-name <name> SPNEGO service name
	 -S, --show-error    Show error even when -s is used
	 -s, --silent        Silent mode
	     --socks4 <host[:port]> SOCKS4 proxy on given host + port
	     --socks4a <host[:port]> SOCKS4a proxy on given host + port
	     --socks5 <host[:port]> SOCKS5 proxy on given host + port
	     --socks5-basic  Enable username/password auth for SOCKS5 proxies
	     --socks5-gssapi Enable GSS-API auth for SOCKS5 proxies
	     --socks5-gssapi-nec Compatibility with NEC SOCKS5 server
	     --socks5-gssapi-service <name> SOCKS5 proxy service name for GSS-API
	     --socks5-hostname <host[:port]> SOCKS5 proxy, pass host name to proxy
	 -Y, --speed-limit <speed> Stop transfers slower than this
	 -y, --speed-time <seconds> Trigger 'speed-limit' abort after this time
	     --ssl           Try SSL/TLS
	     --ssl-allow-beast Allow security flaw to improve interop
	     --ssl-no-revoke Disable cert revocation checks (Schannel)
	     --ssl-reqd      Require SSL/TLS
	 -2, --sslv2         Use SSLv2
	 -3, --sslv3         Use SSLv3
	     --stderr        Where to redirect stderr
	     --styled-output Enable styled output for HTTP headers
	     --suppress-connect-headers Suppress proxy CONNECT response headers
	     --tcp-fastopen  Use TCP Fast Open
	     --tcp-nodelay   Use the TCP_NODELAY option
	 -t, --telnet-option <opt=val> Set telnet option
	     --tftp-blksize <value> Set TFTP BLKSIZE option
	     --tftp-no-options Do not send any TFTP options
	 -z, --time-cond <time> Transfer based on a time condition
	     --tls-max <VERSION> Set maximum allowed TLS version
	     --tls13-ciphers <list of TLS 1.3 ciphersuites> TLS 1.3 cipher suites to use
	     --tlsauthtype <type> TLS authentication type
	     --tlspassword   TLS password
	     --tlsuser <name> TLS user name
	 -1, --tlsv1         Use TLSv1.0 or greater
	     --tlsv1.0       Use TLSv1.0 or greater
	     --tlsv1.1       Use TLSv1.1 or greater
	     --tlsv1.2       Use TLSv1.2 or greater
	     --tlsv1.3       Use TLSv1.3 or greater
	     --tr-encoding   Request compressed transfer encoding
	     --trace <file>  Write a debug trace to FILE
	     --trace-ascii <file> Like --trace, but without hex output
	     --trace-time    Add time stamps to trace/verbose output
	     --unix-socket <path> Connect through this Unix domain socket
	 -T, --upload-file <file> Transfer local FILE to destination
	     --url <url>     URL to work with
	 -B, --use-ascii     Use ASCII/text transfer
	 -u, --user <user:password> Server user and password
	 -A, --user-agent <name> Send User-Agent <name> to server
	 -v, --verbose       Make the operation more talkative
	 -V, --version       Show version number and quit
	 -w, --write-out <format> Use output FORMAT after completion
	     --xattr         Store metadata in extended file attributes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222

2.常用方法

	curl -X POST -H "Content-Type:application/json" -d '{"username":"test1","password":"test1"}' http://localhost:5000/login
	{
	    "message": "登录成功",
	    "token": "WyIxIiwiOThiZmVlMjFlZjljYTU0NzZkYzNmMTUyODUzNDM2MzgiXQ.CgpV7Q.ypduIJefgJAdHAbB_WIrLzfsXYc"
	}
1
2
3
4
5

	$ curl -H "Content-Type:application/json" -H "Authorization: WyIxIiwiOThiZmVlMjFlZjljYTU0NzZkYzNmMTUyODUzNDM2MzgiXQ.CgpV7Q.ypduIJefgJAdHAbB_WIrLzfsXYc" "http://localhost:5000/protected"
	{
	    "msg": "这是需要Token的GET方法"
	}
1
2
3
4