当前位置:   article > 正文

设置grub配置文件中的屏幕分辨率_grub 分辨率

grub 分辨率
  1. # If you change this file, run 'update-grub' afterwards to update
  2. # /boot/grub/grub.cfg.
  3. # For full documentation of the options in this file, see:
  4. # info -f grub -n 'Simple configuration'
  5. GRUB_DEFAULT=0
  6. GRUB_TIMEOUT_STYLE=hidden
  7. GRUB_TIMEOUT=10
  8. GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
  9. GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
  10. GRUB_CMDLINE_LINUX=""
  11. # Uncomment to enable BadRAM filtering, modify to suit your needs
  12. # This works with Linux (no patch required) and with any kernel that obtains
  13. # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
  14. #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
  15. # Uncomment to disable graphical terminal (grub-pc only)
  16. #GRUB_TERMINAL=console
  17. # The resolution used on graphical terminal
  18. # note that you can use only modes which your graphic card supports via VBE
  19. # you can see them in real GRUB with the command `vbeinfo'
  20. #GRUB_GFXMODE=640x480
  21. # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
  22. #GRUB_DISABLE_LINUX_UUID=true
  23. # Uncomment to disable generation of recovery mode menu entries
  24. #GRUB_DISABLE_RECOVERY="true"
  25. # Uncomment to get a beep at grub start
  26. #GRUB_INIT_TUNE="480 440 1"

设置grub配置文件中的屏幕分辨率。将分辨率调小,则字体就会变大。
      具体过程如下。
      在ubuntu的终端中输入如下代码:
            $ sudo gedit /etc/default/grub
      然后在打开的grub文件中找到GRUB_GFXMODE,将前面的注释去掉,并将其值设置为
            GRUB_GFXMODE=1024x768
      (注:也可以改为其他显卡支持的分辨率,但不能改为16:9的分辨率,否则没有任何效果,不知为何。)
         然后命令行中输入:
              $ sudo update-grub
        让配置生效。重启电脑。

声明:本文内容由网友自发贡献,不代表【wpsshop博客】立场,版权归原作者所有,本站不承担相应法律责任。如您发现有侵权的内容,请联系我们。转载请注明出处:https://www.wpsshop.cn/w/Monodyee/article/detail/263027
推荐阅读
相关标签
  

闽ICP备14008679号