关于FORM FOLDER 的布局

网上有关于FOLDER布局：
转载 -----------------
附加一点Form布局：由于对form进行了一些完善，主要包括增加弹性域和附件，又遇到了一些关于布局的问题，form的布局真是一个比较麻烦的事情啊。做folder时，如果保存了一个文件夹，那么在做folder修改时，会发现无论怎么做修改，都不会改变，今天做folder时，添加的字段总也显示不出来，把字段显示出来后，布局还是不正确，后来发现是保存了folder的文件夹。还有，做完folder后，在WHEN-NEW-FORM-INSTANCE里用app_folder.event('VERIFY')检查一下布局，修改好后，再注释掉。在使用了固定堆叠画布以后，记得在WHEN-NEW-FORM-INSTANCE里修改app_folder.define_folder_block()。固定堆叠还是很有用的，没用它的时候，窗口拉多大，堆叠画布就跟着跑多远，在布局的时候，设定了它的宽度也没用。

今天我使用app_folder.event('VERIFY');来做检查，
但是在R12中使用该代码时，会提示一个FOLDER ERROR错误,错误上有提示说是用在系统的检查功能里，设置global.folder_verify_mode这个值为TRUE，然后下次打开FOLDER FORM上会弹出需保存一个文件，这个文件包含了检查的内容，示例内容如下：
Current form: CUXCASEINV

Checking prompt block FOLDER_PROMPT...
FOLDER_PROMPT.RELATION_FLAG should have an alignment of [Center].
Consider setting the width of each checkbox prompt to .1 inch so that checkboxes will be centered correctly under their prompts.
FOLDER_PROMPT.DESCRIPTION must be at Y=0.0 inches.
FOLDER_PROMPT.QUANTITY must be at Y=0.0 inches.
FOLDER_PROMPT.UOM must be at Y=0.0 inches.
FOLDER_PROMPT.CASE_INV_NUMBER must be at Y=0.0 inches.
FOLDER_PROMPT.NOTE must be at Y=0.0 inches.
FOLDER_PROMPT.SEGMENT1 must be at Y=0.0 inches.
FOLDER_PROMPT.SEG_DESCRIPTION must be at Y=0.0 inches.
FOLDER_PROMPT.ENABLE_DATE_FROM must be at Y=0.0 inches.
FOLDER_PROMPT.ENABLE_DATE_TO must be at Y=0.0 inches.
FOLDER_PROMPT.FOLDER_OPEN should be at X=0.1 inches.
FOLDER_PROMPT.FOLDER_TITLE should be 4 inches wide.
FOLDER_PROMPT.FOLDER_TITLE should be at X=0.4 inches.

Checking folder block CUX_CASE_INV_RELATION...
INDICATOR is in CUX_CASE_INV_RELATION but not in FOLDER_PROMPT.
CUX_CASE_INV_RELATION.RELATION_FLAG must have a height of .25 inches.
CUX_CASE_INV_RELATION.DESCRIPTION must be at Y=.25 inches.
CUX_CASE_INV_RELATION.QUANTITY must be at Y=.25 inches.
CUX_CASE_INV_RELATION.UOM must be at Y=.25 inches.
CUX_CASE_INV_RELATION.CASE_INV_NUMBER must be at Y=.25 inches.
CUX_CASE_INV_RELATION.NOTE must be at Y=.25 inches.
CUX_CASE_INV_RELATION.SEGMENT1 must be at Y=.25 inches.
CUX_CASE_INV_RELATION.SEG_DESCRIPTION must be at Y=.25 inches.
CUX_CASE_INV_RELATION.ENABLE_DATE_FROM must be at Y=.25 inches.
CUX_CASE_INV_RELATION.ENABLE_DATE_TO must be at Y=.25 inches.

Checking for other specific items...
CUX_CASE_INV_RELATION must contain a SWITCHER or FOLDER_SWITCHER item.

VERIFY: Completed for block CUX_CASE_INV_RELATION.

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/21704144/viewspace-1046815/，如需转载，请注明出处，否则将追究法律责任。