qt 设置ui窗口为固定大小,Qt窗口调整大小问题

作者：Monodyee | 2024-05-02 01:12:52

踩

I am having a problem redrawing a QWidget window after its size has been adjusted. I have tried update(), repaint(), adjustSize(), but all seem to suffer from the same thing: only part of the window is redrawn, resulting in the window frame on the bottom and right sides to not show. The window is also not resized entirely.

Just in case it makes a difference, the window is in a QMdiArea.

Thanks.

// ... some subwidget resizing and moving.

calibrationWindowUIs[activeWindow].layoutWidget2->move(QPoint(oldXLeft, 30 + height + 21));

calibrationWindowUIs[activeWindow].layoutWidget1->move(QPoint(oldXRight, 30 + height + 21));

// Set window size.

calibrationWindows[activeWindow]->setMinimumSize(calibrationWindowUIs[activeWindow].tabWidget->geometry().width() + 40, calibrationWindowUIs[activeWindow].tabWidget->geometry(

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/Monodyee/article/detail/521474