微信公众号 frp 配置_微信公众号httpproxyhost

nginx 配置中增加

server { listen 80;

server_name weixin.****.com;

location / {

proxy_pass http://127.0.0.1:8080;

proxy_set_header Host $host:80;

proxy_set_header X-Real-IP $remote_addr;

proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;

proxy_hide_header X-Powered-By;

}

}

 
# 代理http web
server {
    listen 80;
    server_name weixin.****.com;
    
    location / {
        proxy_pass http://127.0.0.1:8080;
        proxy_set_header Host $host:80;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_hide_header X-Powered-By;
    }
}
 
# 如果启用SSL
server {
    listen 443 ssl http2;
    server_name weixin.*****.com;
 
    ssl on;
    ssl_certificate /root/2617988_weixin.*****.com.pem;
    ssl_certificate_key /root/2617988_weixin.*****.com.key;
    ssl_prefer_server_ciphers on;
    ssl_session_timeout 60m;
 
    location / {
        proxy_pass http: //127.0.0.1:8080;
        proxy_set_header Host $host;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_hide_header X-Powered-By;
    }
}

重启nginx

启动 Nginx：systemctl start nginx

停止 Nginx：systemctl stop nginx

frp服务端一键安装脚本

https://github.com/MvsCode/frps-onekey

Usage: /etc/init.d/frps {start|stop|restart|status|config|version}

frps 服务端配置

# [common] is integral section
[common]
# A literal address or host name for IPv6 must be enclosed
# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
bind_addr = 0.0.0.0
bind_port = 5443
# udp port used for kcp protocol, it can be same with 'bind_port'
# if not set, kcp is disabled in frps
kcp_bind_port = 5443
# if you want to configure or reload frps by dashboard, dashboard_port must be set
dashboard_port = 6443
# dashboard assets directory(only for debug mode)
dashboard_user = admin
dashboard_pwd = o0ub5IhW
# assets_dir = ./static
vhost_http_port = 8080
vhost_https_port = 4433
# console or real logFile path like ./frps.log
log_file = ./frps.log
# debug, info, warn, error
log_level = error
log_max_days = 3
# auth token
token = 73GHh4Vs2Oqk0NkX
# It is convenient to use subdomain configure for http、https type when many people use one frps server together.
subdomain_host = 23.234.207.131
# only allow frpc to bind ports you list, if you set nothing, there won't be any limit
#allow_ports = 1-65535
# pool_count in each proxy will change to max_pool_count if they exceed the maximum value
max_pool_count = 50
# if tcp stream multiplexing is used, default is true
tcp_mux = true

fpr客户端配置

 
[common]
 
#填服务器的ip
server_addr = 45.77.22.40
server_port = 5443
token = KKKK3vlidz4oMhdx
pool_count = 5
 
 
[web]
#配置类型为http协议
type = http
local_ip = 127.0.0.1
#内网需要监听的端口（win10所启服务端口）
local_port = 80
custom_domains = weixin.****.com