devbox
很楠不爱3
这个屌丝很懒，什么也没留下！
关注作者
热门标签
热门文章
当前位置:   article > 正文

ESP32驱动0.96寸OLED_esp32驱动0.96oled屏

作者：很楠不爱3 | 2024-03-25 11:34:25

赞

踩

esp32驱动0.96oled屏

这个分享由于不是我自己写的驱动库，所以没啥好说的，这是ESP32的开源库里面有的，而且已经被认证了的，我也用过，没什么大问题，不过我还是很讨厌用这种小屏幕，小家吧气的，我之前更过驱动TFTLCD，那个好用一些，我下面直接贴代码，然后简略说一下用法

代码部分

Wire.begin(); // 开启IIC用来驱动0.96oeld
oled.init(); // SSD1306 0.96 OLED 初始化
oled.clearDisplay(); // 清除屏幕
oled.setTextXY( 0 , 0 ); // 设置显示位置
oled.putString("XIHUA "); // 显示信息
核心只有上面几行，由于是IIC驱动，所以肯定第一步是初始化IIC来驱动屏幕，然后是屏幕初始化，清屏，设置在哪里显示，注意他不是128*64的X Y 轴，而是按字符大小为单位算的，0 ， 1 ，2这样改一下就知道了。然后就是显示字符信息了

这是OLED_SSD1306.h，

#ifndef OLED_SSD1306_H
#define OLED_SSD1306_H

/*
    编写者：bird  （对于0.96oled官方库做的一点更改适用于手上的oled）
    代码功能：热点配置ESP32内部数据  并且  用nvs存入设备flash中
    编写日期：2020.10
    最近一次更新：2020.10.28

    使用示例：
        Wire.begin();	
        oled.init();                      // Initialze SSD1306 OLED display
        oled.clearDisplay();              // Clear screen
        oled.setTextXY(0,0);              // Set cursor position, start of line 0
        oled.putString("ACROBOTIC");
*/

#if ARDUINO >= 100
 #include "Arduino.h"
#else
 #include "WProgram.h"
#endif

#ifdef __AVR__
  #include <avr/pgmspace.h>
  #define OLEDFONT(name) static const uint8_t __attribute__ ((progmem))_n[]
#elif defined(ESP8266)
  #include <pgmspace.h>
  #define OLEDFONT(name) static const uint8_t name[]
#else
  #define pgm_read_byte(addr) (*(const unsigned char *)(addr))
  #define OLEDFONT(name) static const uint8_t name[]
#endif

#include "Wire.h"
#include "font8x8.h"
#include "font8x16.h"

#define SSD1306_Max_X                 127    //128 Pixels
#define SSD1306_Max_Y                 63     //64  Pixels

#define PAGE_MODE                     01
#define HORIZONTAL_MODE               02

#define SSD1306_Address               0x3C
#define SSD1306_Command_Mode          0x80
#define SSD1306_Data_Mode             0x40
#define SSD1306_Display_Off_Cmd       0xAE
#define SSD1306_Display_On_Cmd        0xAF
#define SSD1306_Normal_Display_Cmd    0xA6
#define SSD1306_Inverse_Display_Cmd   0xA7
#define SSD1306_Activate_Scroll_Cmd   0x2F
#define SSD1306_Dectivate_Scroll_Cmd  0x2E
#define SSD1306_Set_Brightness_Cmd    0x81

#define Scroll_Left                   0x00
#define Scroll_Right                  0x01

#define Scroll_2Frames                0x7
#define Scroll_3Frames                0x4
#define Scroll_4Frames                0x5
#define Scroll_5Frames                0x0
#define Scroll_25Frames               0x6
#define Scroll_64Frames               0x1
#define Scroll_128Frames              0x2
#define Scroll_256Frames              0x3

class ACROBOTIC_SSD1306 {
  public:
    char addressingMode;
    void init(void);

    void setNormalDisplay();
    void setInverseDisplay();

    void sendCommand(unsigned char command);
    void WriteCmd(unsigned char command);
    void sendData(unsigned char Data);

    void setPageMode();
    void setHorizontalMode();

    void setTextXY(unsigned char Row, unsigned char Column);
    void clearDisplay();
    void setBrightness(unsigned char Brightness);
    bool putChar(unsigned char c);
    void putString(const char *string);
    void putString(String string);
    unsigned char putNumber(long n);
    unsigned char putFloat(float floatNumber,unsigned char decimal);
    unsigned char putFloat(float floatNumber);
    void drawBitmap(unsigned char *bitmaparray,int bytes);

    void setHorizontalScrollProperties(
        bool direction,
        unsigned char startPage, 
        unsigned char endPage, 
        unsigned char scrollSpeed);
    void activateScroll();
    void deactivateScroll();

    void setFont(const uint8_t* font);

  private:
    const uint8_t* m_font;      // Current font.
    uint8_t m_font_offset = 2;  // Font bytes for meta data.
    uint8_t m_font_width;       // Font witdth.
    uint8_t m_col;              // Cursor column.
    uint8_t m_row;              // Cursor row (RAM). 
};

extern ACROBOTIC_SSD1306 oled;  // ACROBOTIC_SSD1306 object 

#endif


  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115

这是OLED_SSD1306.cpp:

#include "0.96OLED/OLED_SSD1306.h"

/*
    编写者：陈枭  （对于0.96oled官方库做的一点更改适用于手上的oled）
    代码功能：热点配置ESP32内部数据  并且  用nvs存入设备flash中
    编写日期：2020.10
    最近一次更新：2020.10.28

    使用示例：
        Wire.begin();	
        oled.init();                      // Initialze SSD1306 OLED display
        oled.clearDisplay();              // Clear screen
        oled.setTextXY(0,0);              // Set cursor position, start of line 0
        oled.putString("ACROBOTIC");
*/

void ACROBOTIC_SSD1306::init(void)
{
  sendCommand(0xAE); //display off
  sendCommand(0x20); //Set Memory Addressing Mode    
  sendCommand(0x10); //00,Horizontal Addressing Mode;01,Vertical Addressing Mode;10,Page Addressing Mode (RESET);11,Invalid
  sendCommand(0xb0); //Set Page Start Address for Page Addressing Mode,0-7
  sendCommand(0xc8); //Set COM Output Scan Direction
  sendCommand(0x00); //---set low column address
  sendCommand(0x10); //---set high column address
  sendCommand(0x40); //--set start line address
  sendCommand(0x81); //--set contrast control register
  sendCommand(0xff); //亮度调节 0x00~0xff
  sendCommand(0xa1); //--set segment re-map 0 to 127
  sendCommand(0xa6); //--set normal display
  sendCommand(0xa8); //--set multiplex ratio(1 to 64)
  sendCommand(0x3F); //
  sendCommand(0xa4); //0xa4,Output follows RAM content;0xa5,Output ignores RAM content
  sendCommand(0xd3); //-set display offset
  sendCommand(0x00); //-not offset
  sendCommand(0xd5); //--set display clock divide ratio/oscillator frequency
  sendCommand(0xf0); //--set divide ratio
  sendCommand(0xd9); //--set pre-charge period
  sendCommand(0x22); //
  sendCommand(0xda); //--set com pins hardware configuration
  sendCommand(0x12);
  sendCommand(0xdb); //--set vcomh
  sendCommand(0x20); //0x20,0.77xVcc
  sendCommand(0x8d); //--set DC-DC enable
  sendCommand(0x14); //
  sendCommand(0xaf); //--turn on oled panel
  clearDisplay();
  sendCommand(0x2E);            //Stop scroll
  sendCommand(0x20);            //Set Memory Addressing Mode
  sendCommand(0x00);            //Set Memory Addressing Mode ab Horizontal addressing mode
  setFont(font8x8);
}

void ACROBOTIC_SSD1306::setFont(const uint8_t* font)
{
  m_font = font;
  m_font_width = pgm_read_byte(&m_font[0]);
}


void ACROBOTIC_SSD1306::sendCommand(unsigned char command)
{
  Wire.beginTransmission(SSD1306_Address);    // begin I2C communication
  Wire.write(SSD1306_Command_Mode);           // Set OLED Command mode
  Wire.write(command);
  Wire.endTransmission();                       // End I2C communication
}

void ACROBOTIC_SSD1306::WriteCmd(unsigned char command)
{
  Wire.beginTransmission(SSD1306_Address);    // begin I2C communication
  Wire.write(SSD1306_Command_Mode);           // Set OLED Command mode
  Wire.write(command);
  Wire.endTransmission();                       // End I2C communication
}

void ACROBOTIC_SSD1306::setBrightness(unsigned char Brightness)
{
   sendCommand(SSD1306_Set_Brightness_Cmd);
   sendCommand(Brightness);
}

void ACROBOTIC_SSD1306::setHorizontalMode()
{
    addressingMode = HORIZONTAL_MODE;
    sendCommand(0x20);                      //set addressing mode
    sendCommand(0x00);                      //set horizontal addressing mode
}

void ACROBOTIC_SSD1306::setPageMode()
{
    addressingMode = PAGE_MODE;
    sendCommand(0x20);                      //set addressing mode
    sendCommand(0x02);                      //set page addressing mode
}

void ACROBOTIC_SSD1306::setTextXY(unsigned char row, unsigned char col)
{
    sendCommand(0xB0 + row);                          //set page address
    sendCommand(0x00 + (m_font_width*col & 0x0F));    //set column lower addr
    sendCommand(0x10 + ((m_font_width*col>>4)&0x0F)); //set column higher addr
}

void ACROBOTIC_SSD1306::clearDisplay()
{
  unsigned char i,j;
  sendCommand(SSD1306_Display_Off_Cmd);     //display off
  for(j=0;j<8;j++)
  {    
    setTextXY(j,0);    
    {
      for(i=0;i<16;i++)  //clear all columns
      {
        putChar(' ');    
      }
    }
  }
  sendCommand(SSD1306_Display_On_Cmd);     //display on
  setTextXY(0,0);    
}

void ACROBOTIC_SSD1306::sendData(unsigned char Data)
{
     Wire.beginTransmission(SSD1306_Address); // begin I2C transmission
     Wire.write(SSD1306_Data_Mode);            // data mode
     Wire.write(Data);
     Wire.endTransmission();                    // stop I2C transmission
}

bool ACROBOTIC_SSD1306::putChar(unsigned char ch)
{
    if (!m_font) return 0;
    //Ignore non-printable ASCII characters. This can be modified for
    //multilingual font.  
    if(ch < 32 || ch > 127) 
    {
        ch = ' ';
    }    
    for(unsigned char i=0;i<m_font_width;i++)
    {
       // Font array starts at 0, ASCII starts at 32
       sendData(pgm_read_byte(&m_font[(ch-32)*m_font_width+m_font_offset+i])); 
    }
}

void ACROBOTIC_SSD1306::putString(const char *string)
{
    unsigned char i=0;
    while(string[i])
    {
        putChar(string[i]);     
        i++;
    }
}

void ACROBOTIC_SSD1306::putString(String string)
{
    char char_array[string.length()+1];
    string.toCharArray(char_array, sizeof(char_array));
    putString(char_array);
}

unsigned char ACROBOTIC_SSD1306::putNumber(long long_num)
{
  unsigned char char_buffer[10]="";
  unsigned char i = 0;
  unsigned char f = 0;

  if (long_num < 0) 
  {
    f=1;
    putChar('-');
    long_num = -long_num;
  } 
  else if (long_num == 0) 
  {
    f=1;
    putChar('0');
    return f;
  } 

  while (long_num > 0) 
  {
    char_buffer[i++] = long_num % 10;
    long_num /= 10;
  }

  f=f+i;
  for(; i > 0; i--)
  {
    putChar('0'+ char_buffer[i - 1]);
  }
  return f;

}

unsigned char ACROBOTIC_SSD1306::putFloat(float floatNumber,unsigned char decimal)
{
  unsigned int temp=0;
  float decy=0.0;
  float rounding = 0.5;
  unsigned char f=0;
  if(floatNumber<0.0)
  {
    putString("-");
    floatNumber = -floatNumber;
    f +=1;
  }
  for (unsigned char i=0; i<decimal; ++i)
  {
    rounding /= 10.0;
  }
    floatNumber += rounding;
  
  temp = floatNumber;
  f += putNumber(temp);
  if(decimal>0)
  {
    putChar('.');
    f +=1;
 }
  decy = floatNumber-temp;//decimal part, 
  for(unsigned char i=0;i<decimal;i++)//4 
  {
    decy *=10;// for the next decimal
    temp = decy;//get the decimal
    putNumber(temp);
    decy -= temp;
  }
  f +=decimal;
  return f;
}
unsigned char ACROBOTIC_SSD1306::putFloat(float floatNumber)
{
  unsigned char decimal=2;
  unsigned int temp=0;
  float decy=0.0;
  float rounding = 0.5;
  unsigned char f=0;
  if(floatNumber<0.0)
  {
    putString("-");
    floatNumber = -floatNumber;
    f +=1;
  }
  for (unsigned char i=0; i<decimal; ++i)
  {
    rounding /= 10.0;
  }
    floatNumber += rounding;
  
  temp = floatNumber;
  f += putNumber(temp);
  if(decimal>0)
  {
    putChar('.');
    f +=1;
 }
  decy = floatNumber-temp;//decimal part, 
  for(unsigned char i=0;i<decimal;i++)//4 
  {
    decy *=10;// for the next decimal
    temp = decy;//get the decimal
    putNumber(temp);
    decy -= temp;
  }
  f +=decimal;
  return f;
}

void ACROBOTIC_SSD1306::drawBitmap(unsigned char *bitmaparray,int bytes)
{
  char localAddressMode = addressingMode;
  if(addressingMode != HORIZONTAL_MODE)
  {
      //Bitmap is drawn in horizontal mode     
      setHorizontalMode();
  }

  for(int i=0;i<bytes;i++)
  {
      sendData(pgm_read_byte(&bitmaparray[i]));
  }

  if(localAddressMode == PAGE_MODE)
  {
     //If pageMode was used earlier, restore it.
     setPageMode(); 
  }
  
}

void ACROBOTIC_SSD1306::setHorizontalScrollProperties(bool direction,unsigned char startPage, unsigned char endPage, unsigned char scrollSpeed)
{
   if(Scroll_Right == direction)
   {
        //Scroll right
        sendCommand(0x26);
   }
   else
   {
        //Scroll left  
        sendCommand(0x27);

   }
    sendCommand(0x00);
    sendCommand(startPage);
    sendCommand(scrollSpeed);
    sendCommand(endPage);
    sendCommand(0x00);
    sendCommand(0xFF);
}

void ACROBOTIC_SSD1306::activateScroll()
{
    sendCommand(SSD1306_Activate_Scroll_Cmd);
}

void ACROBOTIC_SSD1306::deactivateScroll()
{
    sendCommand(SSD1306_Dectivate_Scroll_Cmd);
}

void ACROBOTIC_SSD1306::setNormalDisplay()
{
    sendCommand(SSD1306_Normal_Display_Cmd);
}

void ACROBOTIC_SSD1306::setInverseDisplay()
{
    sendCommand(SSD1306_Inverse_Display_Cmd);
}


ACROBOTIC_SSD1306 oled;  // Pre-instantiate object


  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336

这是取好的字母符号库font8x8.h，字符大小为8x8

#ifndef FONT8x8_H
#define FONT8x8_H

// 8x8 Font ASCII 32 - 127 Implemented
// Users can modify this to support more characters (glyphs)

OLEDFONT(font8x8) PROGMEM =
{
0x08, // width
0x08, // height

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, //
0x00,0x00,0x00,0x00,0x5F,0x00,0x00,0x00, // !
0x00,0x00,0x00,0x03,0x00,0x03,0x00,0x00, // "
0x00,0x24,0x7E,0x24,0x24,0x7E,0x24,0x00, // #
0x00,0x2E,0x2A,0x7F,0x2A,0x3A,0x00,0x00, // $
0x00,0x46,0x26,0x10,0x08,0x64,0x62,0x00, // %
0x00,0x20,0x54,0x4A,0x54,0x20,0x50,0x00, // &
0x00,0x00,0x00,0x04,0x02,0x00,0x00,0x00, // ’
0x00,0x00,0x00,0x3C,0x42,0x00,0x00,0x00, // (
0x00,0x00,0x00,0x42,0x3C,0x00,0x00,0x00, // )
0x00,0x10,0x54,0x38,0x54,0x10,0x00,0x00, // *
0x00,0x10,0x10,0x7C,0x10,0x10,0x00,0x00, // +
0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00, // ,
0x00,0x10,0x10,0x10,0x10,0x10,0x00,0x00, // -
0x00,0x00,0x00,0x60,0x60,0x00,0x00,0x00, // .
0x00,0x40,0x20,0x10,0x08,0x04,0x00,0x00, // /

0x3C,0x62,0x52,0x4A,0x46,0x3C,0x00,0x00, // 0
0x44,0x42,0x7E,0x40,0x40,0x00,0x00,0x00, // 1
0x64,0x52,0x52,0x52,0x52,0x4C,0x00,0x00, // 2
0x24,0x42,0x42,0x4A,0x4A,0x34,0x00,0x00, // 3
0x30,0x28,0x24,0x7E,0x20,0x20,0x00,0x00, // 4
0x2E,0x4A,0x4A,0x4A,0x4A,0x32,0x00,0x00, // 5
0x3C,0x4A,0x4A,0x4A,0x4A,0x30,0x00,0x00, // 6
0x02,0x02,0x62,0x12,0x0A,0x06,0x00,0x00, // 7
0x34,0x4A,0x4A,0x4A,0x4A,0x34,0x00,0x00, // 8
0x0C,0x52,0x52,0x52,0x52,0x3C,0x00,0x00, // 9
0x00,0x00,0x00,0x48,0x00,0x00,0x00,0x00, // :
0x00,0x00,0x80,0x64,0x00,0x00,0x00,0x00, // ;
0x00,0x00,0x10,0x28,0x44,0x00,0x00,0x00, // <
0x00,0x28,0x28,0x28,0x28,0x28,0x00,0x00, // =
0x00,0x00,0x44,0x28,0x10,0x00,0x00,0x00, // >
0x00,0x04,0x02,0x02,0x52,0x0A,0x04,0x00, // ?

0x00,0x3C,0x42,0x5A,0x56,0x5A,0x1C,0x00, // @
0x7C,0x12,0x12,0x12,0x12,0x7C,0x00,0x00, // A
0x7E,0x4A,0x4A,0x4A,0x4A,0x34,0x00,0x00, // B
0x3C,0x42,0x42,0x42,0x42,0x24,0x00,0x00, // C
0x7E,0x42,0x42,0x42,0x24,0x18,0x00,0x00, // D
0x7E,0x4A,0x4A,0x4A,0x4A,0x42,0x00,0x00, // E
0x7E,0x0A,0x0A,0x0A,0x0A,0x02,0x00,0x00, // F
0x3C,0x42,0x42,0x52,0x52,0x34,0x00,0x00, // G
0x7E,0x08,0x08,0x08,0x08,0x7E,0x00,0x00, // H
0x00,0x42,0x42,0x7E,0x42,0x42,0x00,0x00, // I
0x30,0x40,0x40,0x40,0x40,0x3E,0x00,0x00, // J
0x7E,0x08,0x08,0x14,0x22,0x40,0x00,0x00, // K
0x7E,0x40,0x40,0x40,0x40,0x40,0x00,0x00, // L
0x7E,0x04,0x08,0x08,0x04,0x7E,0x00,0x00, // M
0x7E,0x04,0x08,0x10,0x20,0x7E,0x00,0x00, // N
0x3C,0x42,0x42,0x42,0x42,0x3C,0x00,0x00, // O

0x7E,0x12,0x12,0x12,0x12,0x0C,0x00,0x00, // P
0x3C,0x42,0x52,0x62,0x42,0x3C,0x00,0x00, // Q
0x7E,0x12,0x12,0x12,0x32,0x4C,0x00,0x00, // R
0x24,0x4A,0x4A,0x4A,0x4A,0x30,0x00,0x00, // S
0x02,0x02,0x02,0x7E,0x02,0x02,0x02,0x00, // T
0x3E,0x40,0x40,0x40,0x40,0x3E,0x00,0x00, // U
0x1E,0x20,0x40,0x40,0x20,0x1E,0x00,0x00, // V
0x3E,0x40,0x20,0x20,0x40,0x3E,0x00,0x00, // W
0x42,0x24,0x18,0x18,0x24,0x42,0x00,0x00, // X
0x02,0x04,0x08,0x70,0x08,0x04,0x02,0x00, // Y
0x42,0x62,0x52,0x4A,0x46,0x42,0x00,0x00, // Z
0x00,0x00,0x7E,0x42,0x42,0x00,0x00,0x00, // [
0x00,0x04,0x08,0x10,0x20,0x40,0x00,0x00, //
0x00,0x00,0x42,0x42,0x7E,0x00,0x00,0x00, // ]
0x00,0x08,0x04,0x7E,0x04,0x08,0x00,0x00, // ^
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00, // _

0x3C,0x42,0x99,0xA5,0xA5,0x81,0x42,0x3C, // `
0x00,0x20,0x54,0x54,0x54,0x78,0x00,0x00, // a
0x00,0x7E,0x48,0x48,0x48,0x30,0x00,0x00, // b
0x00,0x00,0x38,0x44,0x44,0x44,0x00,0x00, // c
0x00,0x30,0x48,0x48,0x48,0x7E,0x00,0x00, // d
0x00,0x38,0x54,0x54,0x54,0x48,0x00,0x00, // e
0x00,0x00,0x00,0x7C,0x0A,0x02,0x00,0x00, // f
0x00,0x18,0xA4,0xA4,0xA4,0xA4,0x7C,0x00, // g
0x00,0x7E,0x08,0x08,0x08,0x70,0x00,0x00, // h
0x00,0x00,0x00,0x48,0x7A,0x40,0x00,0x00, // i
0x00,0x00,0x40,0x80,0x80,0x7A,0x00,0x00, // j
0x00,0x7E,0x18,0x24,0x40,0x00,0x00,0x00, // k
0x00,0x00,0x00,0x3E,0x40,0x40,0x00,0x00, // l
0x00,0x7C,0x04,0x78,0x04,0x78,0x00,0x00, // m
0x00,0x7C,0x04,0x04,0x04,0x78,0x00,0x00, // n
0x00,0x38,0x44,0x44,0x44,0x38,0x00,0x00, // o

0x00,0xFC,0x24,0x24,0x24,0x18,0x00,0x00, // p
0x00,0x18,0x24,0x24,0x24,0xFC,0x80,0x00, // q
0x00,0x00,0x78,0x04,0x04,0x04,0x00,0x00, // r
0x00,0x48,0x54,0x54,0x54,0x20,0x00,0x00, // s
0x00,0x00,0x04,0x3E,0x44,0x40,0x00,0x00, // t
0x00,0x3C,0x40,0x40,0x40,0x3C,0x00,0x00, // u
0x00,0x0C,0x30,0x40,0x30,0x0C,0x00,0x00, // v
0x00,0x3C,0x40,0x38,0x40,0x3C,0x00,0x00, // w
0x00,0x44,0x28,0x10,0x28,0x44,0x00,0x00, // x
0x00,0x1C,0xA0,0xA0,0xA0,0x7C,0x00,0x00, // y
0x00,0x44,0x64,0x54,0x4C,0x44,0x00,0x00, // z
0x00,0x08,0x08,0x76,0x42,0x42,0x00,0x00, // {
0x00,0x00,0x00,0x7E,0x00,0x00,0x00,0x00, // |
0x00,0x42,0x42,0x76,0x08,0x08,0x00,0x00, // }
0x00,0x00,0x04,0x02,0x04,0x02,0x00,0x00, // ~
};

#endif

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/很楠不爱3/article/detail/309524
推荐阅读
相关标签

Copyright © 2003-2013 www.wpsshop.cn 版权所有，并保留所有权利。

  

闽ICP备14008679号