Elastic stack8.10.4搭建、启用安全认证，启用https，TLS，SSL 安全配置详解_elasticsearch ssl

ELK大家应该很了解了，废话不多说开始部署

kafka在其中作为消息队列解耦和让logstash高可用

kafka和zk 的安装可以参考这篇文章

深入理解Kafka3.6.0的核心概念，搭建与使用-CSDN博客

第一步、官网下载安装包

需要

elasticsearch-8.10.4

logstash-8.10.4

kibana-8.10.4

kafka_2.13-3.6.0

apache-zookeeper-3.9.1-bin.tar

filebeat-8.10.4-linux-x86_64.tar

第二步: 环境配置（每一台都做）

创建es用户
 

useradd es

配置主机名、配置IP地址、每台主机配置/etc/hosts名称解析

192.168.1.1 es1

192.168.1.2 es2

192.168.1.3 es3

将Linux系统的软硬限制最大文件数改为65536，将所有用户的最大线程数修改为65536

打开/etc/security/limits.conf文件，添加以下配置（每一台都做）

vim  /etc/security/limits.conf
 
 
* soft nofile 65536
* hard nofile 65536
 
* soft nproc 65536
* hard nproc 65536
 
 
es  hard   core    unlimited  #打开生成Core文件
es  soft   core    unlimited
es  soft   memlock unlimited #允许用户锁定内存
es  hard   memlock unlimited
 
 
 
soft  xxx  : 代表警告的设定，可以超过这个设定值，但是超过后会有警告。
hard  xxx  : 代表严格的设定，不允许超过这个设定的值。
nproc  : 是操作系统级别对每个用户创建的进程数的限制
nofile : 是每个进程可以打开的文件数的限制
soft nproc ：单个用户可用的最大进程数量(超过会警告);
hard nproc：单个用户可用的最大进程数量(超过会报错);
soft nofile  ：可打开的文件描述符的最大数(超过会警告);
hard nofile ：可打开的文件描述符的最大数(超过会报错);

修改/etc/sysctl.conf文件，添加下面这行，并执行命令sysctl  -p使其生效

vim /etc/sysctl.conf
 
vm.max_map_count=262144  #限制一个进程可以拥有的VMA(虚拟内存区域)的数量，es要求最低65536
net.ipv4.tcp_retries2=5 #数据重传次数超过 tcp_retries2 会直接放弃重传，关闭 TCP 流

解压安装包，进入config文件夹，修改elasticsearch.yml 配置文件 

cluster.name: elk #集群名称
node.name: node1 #节点名称
node.roles: [ master,data ] #节点角色
node.attr.rack: r1  #机架位置，一般没啥意义这个配置
path.data: /data/esdata  
path.logs: /data/eslog
bootstrap.memory_lock: true  #允许锁定内存
network.host: 0.0.0.0 
http.max_content_length: 200mb
network.tcp.keep_alive: true
network.tcp.no_delay: true
http.port: 9200
http.cors.enabled: true #允许http跨域访问，es_head插件必须开启
http.cors.allow-origin: "*"  #允许http跨域访问，es_head插件必须开启
discovery.seed_hosts: ["ypd-dmcp-log01", "ypd-dmcp-log02"]
cluster.initial_master_nodes: ["ypd-dmcp-log01", "ypd-dmcp-log02"]
xpack.monitoring.collection.enabled: true #添加这个配置以后在kibana中才会显示联机状态，否则会显示脱机状态
xpack.security.enabled: true
#xpack.security.enrollment.enabled: true
xpack.security.http.ssl.enabled: true
xpack.security.http.ssl.keystore.path: elastic-certificates.p12  #我把文件都放在config下。所以直接写文件名，放在别处需要写路径
xpack.security.http.ssl.truststore.path: elastic-certificates.p12
xpack.security.transport.ssl.enabled: true
xpack.security.transport.ssl.verification_mode: certificate
xpack.security.transport.ssl.keystore.path: elastic-certificates.p12k
xpack.security.transport.ssl.truststore.path: elastic-certificates.p12

配置jvm内存大小 

修改 jvm.options
-Xms6g #你服务器内存的一半，最高32G
-Xmx6g #你服务器内存的一半，最高32G

改好文件夹准备生成相关key

 创建ca证书，什么也不用输入，两次回车即可（会在当前目录生成名为elastic-stack-ca.p12的证书文件）

bin/elasticsearch-certutil  ca

 使用之前生成的ca证书创建节点证书，过程三次回车，会在当前目录生成一个名为elastic-certificates.p12的文件

 

bin/elasticsearch-certutil  cert --ca elastic-stack-ca.p12

 生成http证书，根据提示信息进行操作，主要是下面几步

bin/elasticsearch-certutil http
 
Generate a CSR? [y/N]n
Use an existing CA? [y/N]y
CA Path: /usr/local/elasticsearch-8.10.4/config/certs/elastic-stack-ca.p12
Password for elastic-stack-ca.p12:  直接回车，不使用密码
For how long should your certificate be valid? [5y] 50y#过期时间
Generate a certificate per node? [y/N]n
Enter all the hostnames that you need, one per line. #输入es的节点 两次回车确认
When you are done, press <ENTER> once more to move on to the next step.
es1
es2
es3
 
You entered the following hostnames.
 
 - es1
 - es2
 - es3
 
Is this correct [Y/n]y
 
When you are done, press <ENTER> once more to move on to the next step. #输入es的ip 两次回车确认
 
192.168.1.1
192.168.1.2
192.168.1.3
 
You entered the following IP addresses.
 - 192.168.1.1
 - 192.168.1.2
 - 192.168.1.3
 
Is this correct [Y/n]y
 
Do you wish to change any of these options? [y/N]n
 

接下来一直回车，然后会在当前目录生成名为：elasticsearch-ssl-http.zip的压缩文件

解压缩http证书文件到config下，证书在http文件夹里。名字是http.p12，mv出来到config下

 确保elasticsearch目录下所有文件的归属关系都是es用户

 chown -R es:es /home/es/elasticsearch-8.10.4

启动es

su - es #到es用户下
bin/elasticsearch  初次可以前台启动 没问题就放后台
bin/elasticsearch -d

复制整个es文件夹到es2，es3

只需要修改

node.name: es2 #节点名称
 
network.host: 192.168.1.2 #节点ip
 
node.name: es3 #节点名称
 
network.host: 192.168.1.3 #节点ip

 浏览器访问一下es的web ui

https://192.168.1.1:9200 

 

生成账户密码

 

bin/elasticsearch-setup-passwords interactive
 
warning: ignoring JAVA_HOME=/usr/local/java/jdk1.8.0_361; using bundled JDK
******************************************************************************
Note: The 'elasticsearch-setup-passwords' tool has been deprecated. This       command will be removed in a future release.
******************************************************************************
 
Initiating the setup of passwords for reserved users elastic,apm_system,kibana,kibana_system,logstash_system,beats_system,remote_monitoring_user.
You will be prompted to enter passwords as the process progresses.
Please confirm that you would like to continue [y/N]y
 
 
Enter password for [elastic]: 
Reenter password for [elastic]: 
Enter password for [apm_system]: 
Reenter password for [apm_system]: 
Enter password for [kibana_system]: 
Reenter password for [kibana_system]: 
Enter password for [logstash_system]: 
Reenter password for [logstash_system]: 
Enter password for [beats_system]: 
Reenter password for [beats_system]: 
Enter password for [remote_monitoring_user]: 
Reenter password for [remote_monitoring_user]: 
Changed password for user [apm_system]
Changed password for user [kibana_system]
Changed password for user [kibana]
Changed password for user [logstash_system]
Changed password for user [beats_system]
Changed password for user [remote_monitoring_user]
Changed password for user [elastic]
 
 
 
这个时候就可以使用账号密码访问了

创建一个给kibana使用的用户

bin/elasticsearch-users useradd kibanauser
kibana不能用es超级用户，此处展示一下用法
bin/elasticsearch-users roles -a superuser kibanauser
加两个角色 不然没有监控权限
bin/elasticsearch-users roles -a kibana_admin kibanauser
bin/elasticsearch-users roles -a monitoring_user kibanauser

 然后配置kibana

解压然后修改kibana.yml

server.port: 5601
server.host: "0.0.0.0"
 
server.ssl.enabled: true
server.ssl.certificate: /data/elasticsearch-8.10.4/config/client.cer
server.ssl.key: /data/elasticsearch-8.10.4/config/client.key
elasticsearch.hosts: ["https://192.168.1.1:9200"]
elasticsearch.username: "kibanauser"
elasticsearch.password: "kibanauser"
elasticsearch.ssl.certificate: /data/elasticsearch-8.10.4/config/client.cer
elasticsearch.ssl.key: /data/elasticsearch-8.10.4/config/client.key
elasticsearch.ssl.certificateAuthorities: [ "/data/elasticsearch-8.10.4/config/client-ca.cer" ]
elasticsearch.ssl.verificationMode: certificate
i18n.locale: "zh-CN"
xpack.encryptedSavedObjects.encryptionKey: encryptedSavedObjects1234567890987654321 
xpack.security.encryptionKey: encryptionKeysecurity1234567890987654321
xpack.reporting.encryptionKey: encryptionKeyreporting1234567890987654321

启动

bin/kibana

访问 https://ip:5601 

 配置logstash

解压后在conf下创建一个配置文件，我取名logstash.conf

input {
  kafka {
        bootstrap_servers => "192.168.1.1:9092"
        group_id => "logstash_test"
        client_id => 1 #设置相同topic,设置相同groupid,设置不同clientid,实现LogStash多实例并行消费kafka
        topics => ["testlog"]
        consumer_threads => 2 #等于 topic分区数
        codec => json {    #添加json插件，filebeat发过来的是json格式的数据
            charset => "UTF-8"
        }
        decorate_events => false #此属性会将当前topic、offset、group、partition等信息也带到message中
        type => "testlog" #跟topics不重合。因为output读取不了topics这个变量
}
 
}
filter {
  mutate {
    remove_field => "@version"  #去掉一些没用的参数
    remove_field => "event"
    remove_field => "fields"
    
    }
}
 
 
output {
  elasticsearch {
    cacert => "/data/elasticsearch-8.10.4/config/client-ca.cer"
    ssl => true
    ssl_certificate_verification => false
    user => elastic
    password => "123456"
    action => "index"
    hosts => "https://192.168.1.1:9200"
    index => "%{type}-%{+YYYY.MM.dd}"
}
 
}

修改jvm.options

-Xms6g #你服务器内存的一半，最高32G
-Xmx6g #你服务器内存的一半，最高32G

 

 启动logstash

bin/logstash -f conf/logstash.conf

最后去服务器上部署filebeat 

filebeat.inputs:
- type: filestream 跟以前的log类似。普通的日志选这个就行了
  id: testlog1  
  enabled: true
  paths:
    - /var/log/testlog1.log
  field_under_root: true #让kafka的topic: '%{[fields.log_topic]}'取到变量值
  fields:
    log_topic: testlog1  #跟id不冲突，id输出取不到变量值
  multiline.pattern: '^\d(4)'    # 设置多行合并匹配的规则，意思就是不以4个连续数字，比如2023开头的 视为同一条
  multiline.negate: true   # 如果匹配不上
  multiline.match: after  # 合并到后面
 
- type: filestream 
  id: testlog2
  enabled: true
  paths:
    - /var/log/testlog2
  field_under_root: true 
  fields:
    log_topic: testlog2
  multiline.pattern: '^\d(4)' 
  multiline.negate: true
  multiline.match: after
 
 
 
filebeat.config.modules:
  path: ${path.config}/modules.d/*.yml 
  reload.enabled: true  #开启运行时重载配置
  #reload.period: 10s
path.home: /data/filebeat-8.10.4/  #指明filebeat的文件夹。启动多个时需要
path.data: /data/filebeat-8.10.4/data/
path.logs: /data/filebeat-8.10.4/logs/
 
processors:
  - drop_fields: #删除不需要显示的字段
      fields: ["agent","event","input","log","type","ecs"]
 
output.kafka:
  enabled: true
  hosts: ["10.8.74.35:9092"]   #kafka地址，可配置多个用逗号隔开
  topic: '%{[fields.log_topic]}'   #根据上面添加字段发送不同topic
 

初步的部署这就完成了。后面的使用才是大头，路漫漫其修远兮