git pull 出错 fatal: Could not read from remote repository.Please make sure you have the correct acces_fatal: could not read from remote repository. plea

作者：正经夜光杯 | 2024-08-20 22:22:45

踩

fatal: could not read from remote repository. please make sure you have the

作者：fly 发布于：2014-2-26 13:17 分类：Linux

Warning: Permanently added the RSA host key for IP address '192.30.252.131' to the list of known hosts.

Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.

出现这个问题是因为，没有在github账号添加SSH key

解决方法如下

在终端输入。

ssh-keygen -t rsa -C "forwhat.cn"//注意。forwhat.cn为用户名

如果执行成功。返回

Generating public/private rsa key pair.
Enter file in which to save the key (/home/forwhat.cn/.ssh/id_rsa):
在这里就是设置存储地址了.反正我是直接按的回车

然后还会返回

Enter passphrase (empty for no passphrase):

再次直接回车。
Enter same passphrase again:

再次回车。

Your identification has been saved in /home/forwhat.cn/.ssh/id_rsa.
Your public key has been saved in /home/forwhat.cn/.ssh/id_rsa.pub.
The key fingerprint is:
这里有一串数。我把他屏蔽了。
The key's randomart image is:
+--[ RSA 2048]----+
|                 |
|                 |
|                 |
|    o            |
|   + . S        |
| . = . o       |
|   o + +o.o      |
|E o . o.=+.      |
|.+   ==+ooo.     |
+-----------------+
这样SSH key就生成了。直接cat一下就好了。

000000:~/a$ cat /home/forwhat.cn/.ssh/id_rsa.pub
ssh-rsa AAAAB3NzaC1yc2EAAAADAQ(我屏蔽了)

把显示出来的直接添加到github账户设置里边的SSH keys
。add.

回来在git pull

就开始远程拷贝代码了

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/正经夜光杯/article/detail/1008714