当前位置:   article > 正文

codeforce gym 101726 problem D Poker

there are 52 cards in a deck and 2 players - leon & judyeach player will
D. Poker
time limit per test
2.0 s
memory limit per test
256 MB
input
standard input
output
standard output

Poker is played with a standard 52-card deck (13 ranks and 4 suits). The ranks of the cards, in increasing order, are: 2, 3, ..., 10, Jack, Queen, King and Ace. Given a poker table, with two players, your task is to determine the winner.

Each player has two cards in his hand and there are five common cards to both players. Whichever player has the most valuable 5-card hand, choosing from his own cards and the one on the table, wins. A card on the table may be used by both players at the same time and a player may ignore zero, one or both of his own cards.

To determine the value of a 5-card hand, it is identified as one of the hand types listed below. If the same hand fits more than one type, the most valuable one is chosen. If both players' hands fit the same type, the tie is broken by some rule specific to that type.

The type list, from least to most valuable, and their respective tie-breaking rule are:

  • Highest card: If the hand does not fit any of the other types. To break the tie, the five cards are compared, one by one, from highest to lowest rank, until one hand has a higher card then the other;
  • One pair: Two cards of the same rank. The tie-breaker is similar the rule in Highest card, first comparing the pair, and then the other three cards;
  • Two pairs: Two pairs of different rank. The tie-breaker is first by the most valuable pair, then by the second, then by the last card;
  • Three of a kind: Three cards of the same rank. The tie-breaker is analogous to the one in One pair, first compare the triple, then the other two cards;
  • Straight: Five cards in a sequence. In this case, the Ace may be either the highest rank (after the King) or the lowest (before the 2). The tie-breaker is done by the card of highest rank, considering that Ace has the lowest rank if it comes before a 2;
  • Flush: Five cards of the same suit. The tie-breaker is done like in Highest card;
  • Full House: A three of a kind with a pair. The tie-breaker is done by the rank of the three of a kind, and then by the pair;
  • Four of a kind: Four cards of the same rank. The tie-breaker is done by the rank of the four of a kind, and then by the last card;
  • Straight Flush: Straight and Flush at the same time. The tie-breaker is the same as in Straight.

    Notice that it is possible for the tie to persist even after the tie-breaker rules are applied. The suits of a card are only used to define a Flush, and are not used in any tie-breaker rule.

Input

On the first line, an integer T, the number of test cases.

Each test case is given in three lines. The first two lines have the description of two cards each, the cards of the first player, and of the second. The last line has the description of five cards, the cards on the table.

The description of each card is given by two characters, the rank and the suit, as given in the table.

Limits

  • 1 ≤ T ≤ 105
  • For each test case, all cards are valid and distinct.
Output

For each test, print 1 if the first player wins, 2 if the second player wins, and 0 if there is a tie, even after applying the tie-breaker rules.

Example
input
Copy
3
Ts Js
Tc Jc
Qs Qc Ks Kc As
As 7d
Ah 8s
Ac Ad 9s Jh Kc
As 7d
Ah 8s
Ac Ad 6s 3h Kc
output
Copy
1
0
2
思路:按规则模拟即可。判断当前是什么类型优先判断是否满足等级高的类别。
  1 #include <iostream>
  2 #include <fstream>
  3 #include <sstream>
  4 #include <cstdlib>
  5 #include <cstdio>
  6 #include <cmath>
  7 #include <string>
  8 #include <cstring>
  9 #include <algorithm>
 10 #include <queue>
 11 #include <stack>
 12 #include <vector>
 13 #include <set>
 14 #include <map>
 15 #include <list>
 16 #include <iomanip>
 17 #include <cctype>
 18 #include <cassert>
 19 #include <bitset>
 20 #include <ctime>
 21 
 22 using namespace std;
 23 
 24 #define pau system("pause")
 25 #define ll long long
 26 #define pii pair<int, int>
 27 #define pb push_back
 28 #define mp make_pair
 29 #define clr(a, x) memset(a, x, sizeof(a))
 30 
 31 const double pi = acos(-1.0);
 32 const int INF = 0x3f3f3f3f;
 33 const int MOD = 1e9 + 7;
 34 const double EPS = 1e-9;
 35 
 36 /*
 37 #include <ext/pb_ds/assoc_container.hpp>
 38 #include <ext/pb_ds/tree_policy.hpp>
 39 
 40 using namespace __gnu_pbds;
 41 tree<pli, null_type, greater<pli>, rb_tree_tag, tree_order_statistics_node_update> T;
 42 */
 43 
 44 int t;
 45 struct gg {
 46     int v, co;
 47     gg () {}
 48     gg (int v, int co) : v(v), co(co) {}
 49     void input() {
 50         char c = getchar();
 51         while (!isalpha(c) && !isdigit(c)) c = getchar();
 52         if ('T' == c) {
 53             v = 10;
 54         } else if ('J' == c) {
 55             v = 11;
 56         } else if ('Q' == c) {
 57             v = 12;
 58         } else if ('K' == c) {
 59             v = 13;
 60         } else if ('A' == c) {
 61             v = 14;
 62         } else {
 63             v = c - '0';
 64         }
 65         co = getchar();
 66     }
 67     bool operator < (const gg &g) const {
 68         return v < g.v;
 69     }
 70 } g1[10], g2[10];
 71 struct hh {
 72     int type;
 73     gg g[5];
 74     void modify() {
 75         sort(g, g + 5);
 76     }
 77     void output() {
 78         printf("type = %d ", type);
 79         for (int i = 0; i < 5; ++i) {
 80             printf("%d %c ", g[i].v, g[i].co);
 81         }
 82         puts("");
 83     }
 84     int is_flush() const {
 85         for (int i = 1; i < 5; ++i) {
 86             if (g[i].co != g[0].co) return 0;
 87         }
 88         return g[4].v;
 89     }
 90     int is_straight() const {
 91         int f = 1;
 92         for (int i = 3; ~i; --i) {
 93             if (g[i].v != g[i + 1].v - 1) {
 94                 f = 0;
 95                 break;
 96             }
 97         }
 98         if (f) return g[4].v;
 99         f = 1;
100         if (14 == g[4].v) {
101             for (int i = 0; i < 4; ++i) {
102                 if (g[i].v != i + 2) {
103                     f = 0;
104                     break;
105                 }
106             }
107         } else {
108             f = 0;
109         }
110         return f ? 5 : 0;
111     }
112     int is_pair() const {
113         int i;
114         for (i = 4; i; --i) {
115             if (g[i].v == g[i - 1].v && (1 == i || g[i].v != g[i - 2].v) && (4 == i || g[i].v != g[i + 1].v)) {
116                 break;
117             }
118         }
119         if (i) {
120             int res = g[i].v;
121             for (int j = 4; ~j; --j) {
122                 if (i == j || i - 1 == j) continue;
123                 res = res * 20 + g[j].v;
124             }
125             return res;
126         }
127         return 0;
128     }
129     int is_triple() const {
130         if (g[4].v == g[2].v) return g[4].v * 400 + g[1].v * 20 + g[0].v;
131         if (g[3].v == g[1].v) return g[3].v * 400 + g[4].v * 20 + g[0].v;
132         if (g[2].v == g[0].v) return g[2].v * 400 + g[4].v * 20 + g[3].v;
133         return 0;
134     }
135     int is_fouple() const {
136         if (g[4].v == g[1].v) return g[4].v * 20 + g[0].v;
137         if (g[3].v == g[0].v) return g[3].v * 20 + g[4].v;
138         return 0;
139     }
140     int is_two_pair() const {
141         if (g[4].v == g[3].v && g[2].v == g[1].v) return g[4].v * 400 + g[2].v * 20 + g[0].v;
142         if (g[4].v == g[3].v && g[1].v == g[0].v) return g[4].v * 400 + g[1].v * 20 + g[2].v;
143         if (g[3].v == g[2].v && g[1].v == g[0].v) return g[3].v * 400 + g[1].v * 20 + g[4].v;
144         return 0;
145     }
146     pii is_house() const {
147         if (g[4].v == g[2].v && g[1].v == g[0].v) return pii(g[4].v, g[1].v);
148         if (g[4].v == g[3].v && g[2].v == g[0].v) return pii(g[2].v, g[4].v);
149         return pii(0, 0);
150     }
151     int get_type() const {
152         int ff = is_flush();
153         int fs = is_straight();
154         int fp = is_pair();
155         int ft = is_triple();
156         if (fs) {
157             return ff ? 9 : 5;
158         } else if (is_fouple()) {
159             return 8;
160         } else if (fp && ft) {
161             return 7;
162         } else if (ff) {
163             return 6;
164         } else if (ft) {
165             return 4;
166         } else if (is_two_pair()) {
167             return 3;
168         } else if (is_pair()) {
169             return 2;
170         } else {
171             return 1;
172         }
173     }
174     bool operator < (const hh h) const {
175         if (type != h.type) return type < h.type;
176         if (1 == type) {
177             for (int i = 4; ~i; --i) {
178                 if (g[i].v != h.g[i].v) return g[i].v < h.g[i].v;
179             }
180             return false;
181         } else if (2 == type) {
182             return is_pair() < h.is_pair();
183         } else if (3 == type) {
184             return is_two_pair() < h.is_two_pair();
185         } else if (4 == type) {
186             return is_triple() < h.is_triple();
187         } else if (5 == type) {
188             return is_straight() < h.is_straight();
189         } else if (6 == type) {
190             for (int i = 4; ~i; --i) {
191                 if (g[i].v != h.g[i].v) return g[i].v < h.g[i].v;
192             }
193             return false;
194         } else if (7 == type) {
195             return is_house() < h.is_house();
196         } else if (8 == type) {
197             return is_fouple() < h.is_fouple();
198         } else {
199             return is_straight() < h.is_straight();
200         }
201     }
202 } h1, h2, th;
203 int main() {
204     scanf("%d", &t);
205     while (t--) {
206         g1[1].input(), g1[2].input();
207         g2[1].input(), g2[2].input();
208         for (int i = 1; i <= 5; ++i) {
209             g1[i + 2].input();
210             g2[i + 2] = g1[i + 2];
211         }
212         h1.type = h2.type = 0;
213         for (int i = 1; i <= 7; ++i) {
214             for (int j = i + 1; j <= 7; ++j) {
215                 for (int k = 1, l = 0; k <= 7; ++k) {
216                     if (k == i || k == j) continue;
217                     th.g[l++] = g1[k];
218                 }
219                 th.modify();
220                 th.type = th.get_type();
221                 if (h1 < th) {
222                     h1.type = th.type;
223                     for (int i = 0; i < 5; ++i) {
224                         h1.g[i] = th.g[i];
225                     }
226                 }
227             }
228         }
229         for (int i = 1; i <= 7; ++i) {
230             for (int j = i + 1; j <= 7; ++j) {
231                 for (int k = 1, l = 0; k <= 7; ++k) {
232                     if (k == i || k == j) continue;
233                     th.g[l++] = g2[k];
234                 }
235                 th.modify();
236                 th.type = th.get_type();
237                 if (h2 < th) {
238                     h2.type = th.type;
239                     for (int i = 0; i < 5; ++i) {
240                         h2.g[i] = th.g[i];
241                     }
242                 }
243             }
244         }
245         //h1.output(), h2.output();
246         if (h1 < h2) puts("2");
247         else if (h2 < h1) puts("1");
248         else puts("0");
249     }
250     return 0;
251 }
252 /*
253 111
254 9h 8h
255 Jc 9d
256 9s 4d Ts Ad As
257 */
View Code

 

转载于:https://www.cnblogs.com/BIGTOM/p/8969352.html

声明:本文内容由网友自发贡献,不代表【wpsshop博客】立场,版权归原作者所有,本站不承担相应法律责任。如您发现有侵权的内容,请联系我们。转载请注明出处:https://www.wpsshop.cn/w/盐析白兔/article/detail/72725
推荐阅读
相关标签
  

闽ICP备14008679号