LED循环电路在 basys-3 上实现_basys3数码管循环显示

作者：笔触狂放9 | 2024-07-05 23:16:58

踩

basys3数码管循环显示

在这里插入图片描述


module auto_circulate(
    input CLK,rst,
    output [3:0]SW_in
);
    wire clk;
    CLK_to_clk #(100000000) clock1  (CLK,rst,clk);
    reg [3:0]t ;
    always@(posedge clk,posedge rst)
    begin
        if(rst)
            t<=0;
        else
        begin
            if(t<10)
                t<=t+1;
            else
                t<=0;
        end
    end
    assign SW_in = t;

endmodule


module LED_circulate_display(
    input CLK,rst,
    input [3:0]SW_in, // 输入一个十进制数，显示会相应变化
    output reg [10:0]display_out
);
reg [19:0]count=0; 
reg [2:0] sel=0; 
parameter T1MS=5000; 



always@(posedge CLK) 
    begin 
        if(SW_in==4'd0) 
         begin 
             case(sel) 
             0:display_out<=11'b0111_0000001;  //0
             1:display_out<=11'b1011_1001111;  //1
             2:display_out<=11'b1101_0010010;  //2
             3:display_out<=11'b1110_0000110;  //3
             default:display_out<=11'b1111_1111111; 
             endcase 
         end 
         else if(SW_in==4'd1) 
         begin 
             case(sel) 
             0:display_out<=11'b0111_1001111;  //1
             1:display_out<=11'b1011_0010010;  //2
             2:display_out<=11'b1101_0000110;  //3
             3:display_out<=11'b1110_1001100;  //4
             default:display_out<=11'b1111_1111111; 
             endcase 
         end 
         else if(SW_in==4'd2) 
         begin 
            case(sel) 
             0:display_out<=11'b0111_0010010;  //2
             1:display_out<=11'b1011_0000110;  //3
             2:display_out<=11'b1101_1001100;  //4
             3:display_out<=11'b1110_0100100;  //5
             default:display_out<=11'b1111_1111111; 
             endcase 
         end 
         else if(SW_in==4'd3) 
         begin 
            case(sel) 
             0:display_out<=11'b0111_0000110;  //3
             1:display_out<=11'b1011_1001100;  //4
             2:display_out<=11'b1101_0100100;  //5
             3:display_out<=11'b1110_0100000;  //6
             default:display_out<=11'b1111_1111111; 
             endcase 
         end 
         else if(SW_in==4'd4) 
         begin 
            case(sel) 
             0:display_out<=11'b0111_1001100;  //4
             1:display_out<=11'b1011_0100100;  //5
             2:display_out<=11'b1101_0100000;  //6
             3:display_out<=11'b1110_0001111;  //7
             default:display_out<=11'b1111_1111111; 
             endcase 
         end 
         else if(SW_in==4'd5) 
         begin 
            case(sel) 
             0:display_out<=11'b0111_0100100;  //5
             1:display_out<=11'b1011_0100000;  //6
             2:display_out<=11'b1101_0001111;  //7
             3:display_out<=11'b1110_0000000;  //8
             default:display_out<=11'b1111_1111111; 
             endcase 
         end 
         else if(SW_in==4'd6) 
         begin 
            case(sel) 
             0:display_out<=11'b0111_0100000;  //6
             1:display_out<=11'b1011_0001111;  //7
             2:display_out<=11'b1101_0000000;  //8
             3:display_out<=11'b1110_0000100;  //9
             default:display_out<=11'b1111_1111111; 
             endcase 
         end
         else if(SW_in==4'd7) 
         begin 
            case(sel) 
             0:display_out<=11'b0111_0001111;  //7
             1:display_out<=11'b1011_0000000;  //8
             2:display_out<=11'b1101_0000100;  //9
             3:display_out<=11'b1110_0000001;  //0
             default:display_out<=11'b1111_1111111; 
             endcase 
         end
          else if(SW_in==4'd8) 
         begin 
            case(sel) 
             0:display_out<=11'b0111_0000000;  //8
             1:display_out<=11'b1011_0000100;  //9
             2:display_out<=11'b1101_0000001;  //0
             3:display_out<=11'b1110_1001111;  //1
             default:display_out<=11'b1111_1111111; 
             endcase 
         end
         else if(SW_in==4'd9) 
         begin 
            case(sel) 
             0:display_out<=11'b0111_0000100;  //9
             1:display_out<=11'b1011_0000001;  //0
             2:display_out<=11'b1101_1001111;  //1
             3:display_out<=11'b1110_0010010;  //2
             default:display_out<=11'b1111_1111111; 
             endcase 
         end
         else 
             display_out<=11'b1111_1111111; 

    end 
    
always@(posedge CLK) 
 begin 
     count<=count+1; 
     if(count==T1MS) 
     begin 
         count<=0; 
         sel<=sel+1; 
         if(sel==4) 
         sel<=0; 
     end 
end
endmodule

module top_circulate_LED(
    input CLK,rst,
    input en,
    input [3:0]SW_in,
    output [10:0]display_out
);
    wire [3:0]SW_in_auto;
    wire [3:0]SW;
    assign SW = (en==1)?SW_in_auto:SW_in;
    auto_circulate auto(
        .CLK(CLK),
        .rst(rst),
        .SW_in(SW_in_auto)
    );
    LED_circulate_display show_circulate (
        .CLK(CLK),
        .rst(rst),
        .SW_in(SW),
        .display_out(display_out)
    );
endmodule

module CLK_to_clk
#(parameter T1MS = 7500000) 
(
    input CLK,rst,
    output clk
);
    reg [32:0]count;
    always @(posedge CLK,posedge rst)
    begin
        if(rst)
            count<=0;
        else 
        begin 
            if(count < T1MS)
                count<= count+1 ;
            else count <= 0;
        end
    end
    assign clk = (count==T1MS)?1:0;
endmodule
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198

约束文件

set_property PACKAGE_PIN W5 [get_ports CLK] 
set_property PACKAGE_PIN T18 [get_ports rst] 
set_property PACKAGE_PIN W15 [get_ports en] 
set_property PACKAGE_PIN V17 [get_ports SW_in[0]] 
set_property PACKAGE_PIN V16 [get_ports SW_in[1]] 
set_property PACKAGE_PIN W16 [get_ports SW_in[2]] 
set_property PACKAGE_PIN W17 [get_ports SW_in[3]] 
set_property IOSTANDARD LVCMOS33 [get_ports SW_in[0]]
set_property IOSTANDARD LVCMOS33 [get_ports SW_in[1]]  
set_property IOSTANDARD LVCMOS33 [get_ports SW_in[2]]
set_property IOSTANDARD LVCMOS33 [get_ports SW_in[3]]
set_property IOSTANDARD LVCMOS33 [get_ports en]
set_property IOSTANDARD LVCMOS33 [get_ports rst]    
set_property IOSTANDARD LVCMOS33 [get_ports CLK] 
set_property PACKAGE_PIN W4 [get_ports {display_out[10]}] 
set_property PACKAGE_PIN V4 [get_ports {display_out[9]}] 
set_property PACKAGE_PIN U4 [get_ports {display_out[8]}] 
set_property PACKAGE_PIN U2 [get_ports {display_out[7]}] 
set_property PACKAGE_PIN W7 [get_ports {display_out[6]}] 
set_property PACKAGE_PIN W6 [get_ports {display_out[5]}] 
set_property PACKAGE_PIN U8 [get_ports {display_out[4]}] 
set_property PACKAGE_PIN V8 [get_ports {display_out[3]}] 
set_property PACKAGE_PIN U5 [get_ports {display_out[2]}] 
set_property PACKAGE_PIN V5 [get_ports {display_out[1]}] 
set_property PACKAGE_PIN U7 [get_ports {display_out[0]}] 
set_property IOSTANDARD LVCMOS33 [get_ports {display_out[9]}] 
set_property IOSTANDARD LVCMOS33 [get_ports {display_out[8]}] 
set_property IOSTANDARD LVCMOS33 [get_ports {display_out[7]}] 
set_property IOSTANDARD LVCMOS33 [get_ports {display_out[6]}] 
set_property IOSTANDARD LVCMOS33 [get_ports {display_out[5]}] 
set_property IOSTANDARD LVCMOS33 [get_ports {display_out[4]}] 
set_property IOSTANDARD LVCMOS33 [get_ports {display_out[3]}] 
set_property IOSTANDARD LVCMOS33 [get_ports {display_out[1]}] 
set_property IOSTANDARD LVCMOS33 [get_ports {display_out[2]}] 
set_property IOSTANDARD LVCMOS33 [get_ports {display_out[0]}] 
set_property IOSTANDARD LVCMOS33 [get_ports {display_out[10]}]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/笔触狂放9/article/detail/791234

LED循环电路 在 basys-3 上实现_basys3数码管循环显示

LED循环电路在 basys-3 上实现_basys3数码管循环显示