关于 Quartus II 13.1中调用ModelSim-Altera 10.1d 报错问题_nativelink simulation flow was not successful

作者：繁依Fanyi0 | 2024-07-20 13:03:01

踩

nativelink simulation flow was not successful

用quartus2和modelsim连接仿真时，当你在时序仿真编译启动modelsim时，有时会遇到这种问题，Error: Can't launch the ModelSim-Altera software -- the path to the location of the executables for the ModelSim-Altera software were not specified or the executables were not found at specified path.
Error: You can specify the path inthe EDA Tool Options page of the Options dialog box or using the Tcl command set_user_option.

Error: NativeLink simulation flow was NOT successful

新装了Quartus13.1及自带的ModelSim-Altera 10.1d 版本，在做仿真时调用 ModelSim-Alteara，发现如下错误：
”Can't launch the ModelSim-Al

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/繁依Fanyi0/article/detail/856992