ensp与gns3互通及相关配置_gns3导入华为防火墙

FW防火墙配置：
配置端口IP
int g1/0/1
ip add 192.168.100.1 255.255.255.0
undo shut
q
int g1/0/2
ip add 192.168.152.27 255.255.255.0
undo shut

进入防火墙后台网页配置
int g1/0/2
service-manage http permit
service-manage https permit
service-manage ping permit

把防火墙内网端口加入trust
firewall zone trust
add int g1/0/1

配置回程静态路由
ip route-static 0.0.0.0 0.0.0.0 192.168.100.2

此处策略全通
security-policy
default action permit

配置snmp-server
snmp-server arp-sync enable
#IP为snmp交换机 Public@123为团体名可自定义
snmp-server target-host arp-sync address 192.168.100.2 community Public@123 v2c
snmp-server arp-sync interval 5 timeout 3

查看学习到的mac地址命令
display snmp-server arp-sync table

SW交换机配置：
新建vlan 2 3 100
vlan batch 2 3 100
int vlanif 2
ip add 192.168.2.2 255.255.255.0
int vlanif 3
ip add 192.168.3.2 255.255.255.0
int vlanif 100
ip add 192.168.100.2 255.255.255.0

将端口加入对应vlan中
int g1/0/1
port link-type access
port default vlan 100
undo shutdown

int g1/0/2
port link-type access
port default vlan 2
undo shutdown

int g1/0/3
port link-type access
port default vlan 3
undo shutdown

配置静态路由
ip route-static 0.0.0.0 0.0.0.0 192.168.100.1

配置snmp
snmp-agent
snmp-agent sys-info version v2c
snmp-agent community read Public@123

GNS3

conf ter
vlan 152
exit

int et0/0
switchport mode access
switchport access vlan 152
int et0/1
switchport mode access
switchport access vlan 152

int vlan152
ip address 192.168.152.2 255.255.255.0
no shutdown
exit
ip route 0.0.0.0 0.0.0.0 192.168.152.24

如何配置华为交换机与GNS3互通
详见该UP主视频即可
ensp与gns3互通