华为无线设备配置利用WDS技术部署WLAN业务_华为wds

作者：Cpp五条 | 2024-02-29 19:14:50

踩

华为wds

在这里插入图片描述

配AC与AP1之间网络互通，配置AP2与AP3之间网络互通
[LSW2]vlan batch 100 to 101
[LSW2-GigabitEthernet0/0/1]port link-type trunk
[LSW2-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 to 101
[LSW2-GigabitEthernet0/0/2]port link-type trunk
[LSW2-GigabitEthernet0/0/2]port trunk allow-pass vlan 100 to 101
[LSW2-GigabitEthernet0/0/2]port trunk pvid vlan 100
[LSW1]vlan batch 100 to 101
[LSW1-GigabitEthernet0/0/1]port link-type trunk
[LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 to 101
[LSW1-GigabitEthernet0/0/2]port link-type trunk
[LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 100
[LSW1-GigabitEthernet0/0/3]port link-type trunk
[LSW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 101
[AC1]vlan batch 100 to 101
[AC1-GigabitEthernet0/0/1]port link-type trunk
[AC1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100
[LSW3]vlan batch 100 to 101
[LSW3-GigabitEthernet0/0/1]port link-type trunk
[LSW3-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 to 101
[LSW3-GigabitEthernet0/0/2]port link-type trunk
[LSW3-GigabitEthernet0/0/2]port trunk allow-pass vlan 100 to 101
配置汇聚交换机LSW1为PC分配IP地址，AC为AP分配IP地址
[LSW1]dhcp enable
[LSW1]interface Vlanif 101
[LSW1-Vlanif101]ip add 10.1.101.1 24
[LSW1-Vlanif101]dhcp select interface
[AC1]dhcp enable
[AC1]int Vlanif 100
[AC1-Vlanif100]ip add 10.1.100.1 24
[AC1-Vlanif100]dhcp select interface
配置AP组、国家码和AC的源接口
[AC1]wlan
[AC1-wlan-view]ap-group name wds-root1
[AC1-wlan-view]ap-group name wds-root2
[AC1-wlan-view]ap-group name wds-leaf1
[AC1-wlan-view]ap-group name wds-leaf2
[AC1-wlan-view]regulatory-domain-profile name domain1
[AC1-wlan-regulate-domain-domain1]country-code cn
[AC1-wlan-view]ap-group name wds-root1
[AC1-wlan-ap-group-wds-root1]regulatory-domain-profile domain1
[AC1-wlan-view]ap-group name wds-root2
[AC1-wlan-ap-group-wds-root2]regulatory-domain-profile domain1
[AC1-wlan-view]ap-group name wds-leaf1
[AC1-wlan-ap-group-wds-leaf1]regulatory-domain-profile domain1
[AC1-wlan-view]ap-group name wds-leaf2
[AC1-wlan-ap-group-wds-leaf2]regulatory-domain-profile domain1
[AC1]capwap source interface Vlanif 100
导入AP，并将其加入ap组
[AC1-wlan-view]ap auth-mode mac-auth
[AC1-wlan-view]ap-id 1 ap-mac 00e0-fc16-4b90
[AC1-wlan-ap-1]ap-name ap1
[AC1-wlan-ap-1]ap-group wds-root1
[AC1-wlan-view]ap-id 2 ap-mac 00e0-fc71-0860
[AC1-wlan-ap-2]ap-name ap2
[AC1-wlan-ap-2]ap-group wds-leaf1
[AC1-wlan-view]ap-id 3 ap-mac 00e0-fc57-8090
[AC1-wlan-ap-3]ap-name ap3
[AC1-wlan-ap-3]ap-group wds-root2
[AC1-wlan-view]ap-id 4 ap-mac 00e0-fca9-0c50
[AC1-wlan-ap-4]ap-name ap4
[AC1-wlan-ap-4]ap-group wds-leaf2
配置WDS业务参数
配置WDS节点使用的主要射频参数
[AC1-wlan-view]ap-group name wds-root1
[AC1-wlan-ap-group-wds-root1]radio 1
[AC1-wlan-group-radio-wds-root1/1]channel 40mhz-plus 157
[AC1-wlan-group-radio-wds-root1/1]coverage distance 4
[AC1-wlan-view]ap-group name wds-root2
[AC1-wlan-ap-group-wds-root2]radio 1
[AC1-wlan-group-radio-wds-root2/1]channel 40mhz-plus 149
[AC1-wlan-group-radio-wds-root2/1]coverage distance 4
[AC1-wlan-view]ap-group name wds-leaf1
[AC1-wlan-ap-group-wds-leaf1]radio 1
[AC1-wlan-group-radio-wds-leaf1/1]channel 40mhz-plus 157
[AC1-wlan-group-radio-wds-leaf1/1]coverage distance 4
[AC1-wlan-view]ap-group name wds-leaf2
[AC1-wlan-ap-group-wds-leaf2]radio 1
[AC1-wlan-group-radio-wds-leaf2/1]channel 40mhz-plus 149
[AC1-wlan-group-radio-wds-leaf2/1]coverage distance 4
配置WDS链路使用的安全模板
[AC1-wlan-view]security-profile name wds-sec
[AC1-wlan-sec-prof-wds-sec]security wpa2 psk pass-phrase abc@1234 aes
配置WDS白名单
[AC1-wlan-view]wds-whitelist-profile name wds-list2
[AC1-wlan-wds-whitelist-wds-list2]peer-ap mac 00e0-fca9-0c50
[AC1-wlan-view]wds-whitelist-profile name wds-list1
[AC1-wlan-wds-whitelist-wds-list1]peer-ap mac 00e0-fc71-0860
配置WDS模板“wds-net1”
[AC1-wlan-view]wds-profile name wds-net1
[AC1-wlan-wds-prof-wds-net1]wds-name wds-net
[AC1-wlan-wds-prof-wds-net1]wds-mode root
[AC1-wlan-wds-prof-wds-net1]security-profile wds-sec
[AC1-wlan-wds-prof-wds-net1]vlan tagged 101
配置WDS模板“wds-net2”
[AC1-wlan-view]wds-profile name wds-net2
[AC1-wlan-wds-prof-wds-net2]wds-name wds-net
[AC1-wlan-wds-prof-wds-net2]wds-mode root
[AC1-wlan-wds-prof-wds-net2]security-profile wds-sec
[AC1-wlan-wds-prof-wds-net2]vlan tagged 101
配置WDS模板“wds-net3”
[AC1-wlan-view]wds-profile name wds-net3
[AC1-wlan-wds-prof-wds-net3]wds-name wds-net
[AC1-wlan-wds-prof-wds-net3]wds-mode leaf
[AC1-wlan-wds-prof-wds-net3]security-profile wds-sec
[AC1-wlan-wds-prof-wds-net3]vlan tagged 101
配置AP组“wds-root1”的射频1引用WDS白名单“wds-list1”，只允许AP2接入。配置AP组“wds-root2”的射频1引用WDS白名单“wds-list2”，只允许AP4接入
[AC1-wlan-view]ap-group name wds-root1
[AC1-wlan-ap-group-wds-root1]radio 1
[AC1-wlan-group-radio-wds-root1/1]wds-whitelist-profile wds-list1
[AC1-wlan-view]ap-group name wds-root2
[AC1-wlan-ap-group-wds-root2]radio 1
[AC1-wlan-group-radio-wds-root2/1]wds-whitelist-profile wds-list2
配置AP4的有线口使用的有线口模板，使其有线口模式为“endpoint”,配置有线口的PVID为业务VLAN101，以untagged形式加入VLAN101
[AC1-wlan-view]wired-port-profile name wired-port
[AC1-wlan-wired-port-wired-port]mode endpoint
[AC1-wlan-wired-port-wired-port]vlan pvid 101
[AC1-wlan-wired-port-wired-port]vlan untagged 101
在AP组引用相关模板，使WDS业务生效
[AC1-wlan-view]ap-group name wds-root1
[AC1-wlan-ap-group-wds-root1]wds-profile wds-net1 radio 1
[AC1-wlan-view]ap-group name wds-root2
[AC1-wlan-ap-group-wds-root2]wds-profile wds-net2 radio 1
[AC1-wlan-view]ap-group name wds-leaf1
[AC1-wlan-ap-group-wds-leaf1]wds-profile wds-net3 radio 1
[AC1-wlan-view]ap-group name wds-leaf2
[AC1-wlan-ap-group-wds-leaf2]wds-profile wds-net3 radio 1
[AC1-wlan-ap-group-wds-leaf2]wired-port-profile wired-port gigabitethernet 0

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/Cpp五条/article/detail/167725?site