S905L3b系列 armbian 盒子 Uboot tftpboot 救砖（刷机）_meson-gxl-s905l3b-m302a.dtb

作者：人工智能uu | 2024-08-09 15:04:24

踩

meson-gxl-s905l3b-m302a.dtb

0. armbian 盒子更换apt源更新错误导致启动错误（变砖了），错误如下。


Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Warning: fsck not present, so skipping root file system
[    7.401974] EXT4-fs (mmcblk2p2): recovery complete
[    7.402042] EXT4-fs (mmcblk2p2): mounted filesystem with writeback data mode. Opts: data=writeback. Quota mode: none.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[    7.658881] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00
[    7.660909] CPU: 2 PID: 1 Comm: init Not tainted 5.15.139-ophub #1
[    7.667033] Hardware name: Amlogic Meson GXL (S905L3b) MBH-M302A Box (DT)
[    7.667042] Call trace:
[    7.667046]  dump_backtrace+0x0/0x1d0
[    7.667072]  show_stack+0x18/0x40
[    7.667086]  dump_stack_lvl+0x64/0x80
[    7.667103]  dump_stack+0x18/0x34
[    7.667115]  panic+0x164/0x314
[    7.692993]  do_exit+0x8fc/0x900
[    7.693008]  do_group_exit+0x38/0xa0
[    7.699720]  __arm64_sys_exit_group+0x18/0x20
[    7.699733]  invoke_syscall+0x48/0x110
[    7.707741]  el0_svc_common.constprop.0+0x50/0x180
[    7.707756]  do_el0_svc+0x24/0x84
[    7.715762]  el0_svc+0x28/0xa4
[    7.718779]  el0t_64_sync_handler+0x108/0x114
[    7.723091]  el0t_64_sync+0x1a0/0x1a4
[    7.726717] SMP: stopping secondary CPUs
[    7.730602] Kernel Offset: disabled
[    7.734045] CPU features: 0x0,00002001,00000846
[    7.738531] Memory Limit: none
[    7.741556] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 ]---

重启几次还是无法正常启动，系统启动时 Ctrl + Z 还能进 Uboot 命令模式，网上查资料找到 uboot 支持 tftpboot 模式启动

1. 刷机准备

CH340 usb 转 TTL + 杜邦跳钱

U盘（4G以上，烧录armbian OS镜像使用）

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/人工智能uu/article/detail/953858