am命令基本知识_am start

研究am start命令，今天不忙，顺便把am命令也简单的整理一下，方便以后工作中查看。
1. am start [options] <INTENT>
   解释：启动一个activity
   e.g.am start -n com.android.settings/.Settings
   
2. am startservice <INTENT>
   解释：启动一个service
   e.g.am startservice com.miui.powerkeeper


3. am stopservice <INTENT>
   解释：停止某一个service
   e.g.am stopservice com.miui.powerkeeper
   
4. am broadcast <INTENT>
   解释：发送广播
   
5. am kill <package>
   解释：杀死某一个后台的进程,注意是后台进程，如果这个进程在前台，则杀不死
   e.g.am kill com.duokan.phone.remotecontroller
   
6. am kill-all
   解释：杀死后台所有的进程
   e.g. am kill-all
   
7. am force-stop <package>
   解释：强制杀死某一个进程
   e.g. am force-stop com.android.settings  强制杀死设置进程
   
8. am hang
   解释:系统hang住
   
9. am restart
   解释：重
   
10.am bug-report
   解释：创建一个bugreport
   e.g. shell@nikel:/ $ am bug-report
        Your lovely bug report is being created; please be patient.
   
11.am dumpheap <pid> <file>
   解释：pid进程的堆信息输出到file里
   e.g. am dumpheap 15645 /data/local/tmp/camera
   
12.am send-trim-memory <pid> <level>
   解释：收紧pid进程的内存
   
13.am monitor
   解释：监控
   
14. am set-debug-app [-w] [--persistent] <PACKAGE>
    解释：将应用设置成可调式模式，打开会提示waiting for debugger，方便调试那些在打开过程中产生的bug。
     -W是等待的意思，这个只是一次性的操作，如果想每次打开应用都是debug模式，需要加上--persistent
    e.g. am set-debug-app -W --persistent com.android.settings   设置进程每次打开都进入调试模式


15. am clear-debug-app
    解释：如果用set-debug-app设置了每次打开应用都进入了设置模式，就需要用这条命令解除调试模式。

16. am profile start [--user <USER_ID> current] [--sampling INTERVAL] <PROCESS> <FILE>
    解释：收集trace文件，收集到的trace文件需要用traceview打开
e.g. am profile start com.android.settings /sdcard/traceFileName    抓设置的trace文件并保存到sdcard目录下，名字叫traceFileName


17. am profile stop [--user <USER_ID> current] [<PROCESS>]
    解释：start profile后，结束抓trace




下面是am给出的官方数据，有一些还没有用到，以后慢慢整理完善。
shell@nikel:/ $ am start
usage: am [subcommand] [options]
usage: am start [-D] [-W] [-P <FILE>] [--start-profiler <FILE>]
               [--sampling INTERVAL] [-R COUNT] [-S] [--opengl-trace]
               [--user <USER_ID> | current] <INTENT>
       am startservice [--user <USER_ID> | current] <INTENT>
       am stopservice [--user <USER_ID> | current] <INTENT>
       am force-stop [--user <USER_ID> | all | current] <PACKAGE>
       am kill [--user <USER_ID> | all | current] <PACKAGE>
       am kill-all
       am broadcast [--user <USER_ID> | all | current] <INTENT>
       am instrument [-r] [-e <NAME> <VALUE>] [-p <FILE>] [-w]
               [--user <USER_ID> | current]
               [--no-window-animation] [--abi <ABI>] <COMPONENT>
       am profile start [--user <USER_ID> current] [--sampling INTERVAL] <PROCES
S> <FILE>
       am profile stop [--user <USER_ID> current] [<PROCESS>]
       am dumpheap [--user <USER_ID> current] [-n] <PROCESS> <FILE>
       am set-debug-app [-w] [--persistent] <PACKAGE>
       am clear-debug-app
       am set-watch-heap <PROCESS> <MEM-LIMIT>
       am clear-watch-heap
       am monitor [--gdb <port>]
       am hang [--allow-restart]
       am restart
       am idle-maintenance
       am screen-compat [on|off] <PACKAGE>
       am package-importance <PACKAGE>
       am to-uri [INTENT]
       am to-intent-uri [INTENT]
       am to-app-uri [INTENT]
       am switch-user <USER_ID>
       am start-user <USER_ID>
       am stop-user [-w] <USER_ID>
       am stack start <DISPLAY_ID> <INTENT>
       am stack movetask <TASK_ID> <STACK_ID> [true|false]
       am stack resize <STACK_ID> <LEFT,TOP,RIGHT,BOTTOM>
       am stack split <STACK_ID> <v|h> [INTENT]
       am stack list
       am stack info <STACK_ID>
       am task lock <TASK_ID>
       am task lock stop
       am task resizeable <TASK_ID> [true|false]
       am task resize <TASK_ID> <LEFT,TOP,RIGHT,BOTTOM>
       am get-config
       am set-inactive [--user <USER_ID>] <PACKAGE> true|false
       am get-inactive [--user <USER_ID>] <PACKAGE>
       am send-trim-memory [--user <USER_ID>] <PROCESS>
               [HIDDEN|RUNNING_MODERATE|BACKGROUND|RUNNING_LOW|MODERATE|RUNNING_
CRITICAL|COMPLETE]


am start: start an Activity.  Options are:
    -D: enable debugging
    -W: wait for launch to complete
    --start-profiler <FILE>: start profiler and send results to <FILE>
    --sampling INTERVAL: use sample profiling with INTERVAL microseconds
        between samples (use with --start-profiler)
    -P <FILE>: like above, but profiling stops when app goes idle
    -R: repeat the activity launch <COUNT> times.  Prior to each repeat,
        the top activity will be finished.
    -S: force stop the target app before starting the activity
    --opengl-trace: enable tracing of OpenGL functions
    --user <USER_ID> | current: Specify which user to run as; if not
        specified then run as the current user.


am startservice: start a Service.  Options are:
    --user <USER_ID> | current: Specify which user to run as; if not
        specified then run as the current user.


am stopservice: stop a Service.  Options are:
    --user <USER_ID> | current: Specify which user to run as; if not
        specified then run as the current user.


am force-stop: force stop everything associated with <PACKAGE>.
    --user <USER_ID> | all | current: Specify user to force stop;
        all users if not specified.


am kill: Kill all processes associated with <PACKAGE>.  Only kills.
  processes that are safe to kill -- that is, will not impact the user
  experience.
    --user <USER_ID> | all | current: Specify user whose processes to kill;
        all users if not specified.


am kill-all: Kill all background processes.


am broadcast: send a broadcast Intent.  Options are:
    --user <USER_ID> | all | current: Specify which user to send to; if not
        specified then send to all users.
    --receiver-permission <PERMISSION>: Require receiver to hold permission.


am instrument: start an Instrumentation.  Typically this target <COMPONENT>
  is the form <TEST_PACKAGE>/<RUNNER_CLASS>.  Options are:
    -r: print raw results (otherwise decode REPORT_KEY_STREAMRESULT).  Use with
        [-e perf true] to generate raw output for performance measurements.
    -e <NAME> <VALUE>: set argument <NAME> to <VALUE>.  For test runners a
        common form is [-e <testrunner_flag> <value>[,<value>...]].
    -p <FILE>: write profiling data to <FILE>
    -w: wait for instrumentation to finish before returning.  Required for
        test runners.
    --user <USER_ID> | current: Specify user instrumentation runs in;
        current user if not specified.
    --no-window-animation: turn off window animations while running.
    --abi <ABI>: Launch the instrumented process with the selected ABI.
        This assumes that the process supports the selected ABI.


am profile: start and stop profiler on a process.  The given <PROCESS> argument
  may be either a process name or pid.  Options are:
    --user <USER_ID> | current: When supplying a process name,
        specify user of process to profile; uses current user if not specified.


am dumpheap: dump the heap of a process.  The given <PROCESS> argument may
  be either a process name or pid.  Options are:
    -n: dump native heap instead of managed heap
    --user <USER_ID> | current: When supplying a process name,
        specify user of process to dump; uses current user if not specified.


am set-debug-app: set application <PACKAGE> to debug.  Options are:
    -w: wait for debugger when application starts
    --persistent: retain this value


am clear-debug-app: clear the previously set-debug-app.


am set-watch-heap: start monitoring pss size of <PROCESS>, if it is at or
    above <HEAP-LIMIT> then a heap dump is collected for the user to report


am clear-watch-heap: clear the previously set-watch-heap.


am bug-report: request bug report generation; will launch UI
    when done to select where it should be delivered.


am monitor: start monitoring for crashes or ANRs.
    --gdb: start gdbserv on the given port at crash/ANR


am hang: hang the system.
    --allow-restart: allow watchdog to perform normal system restart


am restart: restart the user-space system.


am idle-maintenance: perform idle maintenance now.


am screen-compat: control screen compatibility mode of <PACKAGE>.


am package-importance: print current importance of <PACKAGE>.


am to-uri: print the given Intent specification as a URI.


am to-intent-uri: print the given Intent specification as an intent: URI.


am to-app-uri: print the given Intent specification as an android-app: URI.


am switch-user: switch to put USER_ID in the foreground, starting
  execution of that user if it is currently stopped.


am start-user: start USER_ID in background if it is currently stopped,
  use switch-user if you want to start the user in foreground.


am stop-user: stop execution of USER_ID, not allowing it to run any
  code until a later explicit start or switch to it.
  -w: wait for stop-user to complete.


am stack start: start a new activity on <DISPLAY_ID> using <INTENT>.


am stack movetask: move <TASK_ID> from its current stack to the top (true) or
bottom (false) of <STACK_ID>.


am stack resize: change <STACK_ID> size and position to <LEFT,TOP,RIGHT,BOTTOM>.




am stack split: split <STACK_ID> into 2 stacks <v>ertically or <h>orizontally
   starting the new stack with [INTENT] if specified. If [INTENT] isn't
   specified and the current stack has more than one task, then the top task
   of the current task will be moved to the new stack. Command will also force
   all current tasks in both stacks to be resizeable.


am stack list: list all of the activity stacks and their sizes.


am stack info:   the information about activity stack <STACK_ID>.


am task lock: bring <TASK_ID> to the front and don't allow other tasks to run.


am task lock stop: end the current task lock.


am task resizeable: change if <TASK_ID> is resizeable (true) or not (false).


am task resize: makes sure <TASK_ID> is in a stack with the specified bounds.
   Forces the task to be resizeable and creates a stack if no existing stack
   has the specified bounds.


am get-config: retrieve the configuration and any recent configurations
  of the device.


am set-inactive: sets the inactive state of an app.


am get-inactive: returns the inactive state of an app.


am send-trim-memory: Send a memory trim event to a <PROCESS>.


<INTENT> specifications include these flags and arguments:
    [-a <ACTION>] [-d <DATA_URI>] [-t <MIME_TYPE>]
    [-c <CATEGORY> [-c <CATEGORY>] ...]
    [-e|--es <EXTRA_KEY> <EXTRA_STRING_VALUE> ...]
    [--esn <EXTRA_KEY> ...]
    [--ez <EXTRA_KEY> <EXTRA_BOOLEAN_VALUE> ...]
    [--ei <EXTRA_KEY> <EXTRA_INT_VALUE> ...]
    [--el <EXTRA_KEY> <EXTRA_LONG_VALUE> ...]
    [--ef <EXTRA_KEY> <EXTRA_FLOAT_VALUE> ...]
    [--eu <EXTRA_KEY> <EXTRA_URI_VALUE> ...]
    [--ecn <EXTRA_KEY> <EXTRA_COMPONENT_NAME_VALUE>]
    [--eia <EXTRA_KEY> <EXTRA_INT_VALUE>[,<EXTRA_INT_VALUE...]]
        (mutiple extras passed as Integer[])
    [--eial <EXTRA_KEY> <EXTRA_INT_VALUE>[,<EXTRA_INT_VALUE...]]
        (mutiple extras passed as List<Integer>)
    [--ela <EXTRA_KEY> <EXTRA_LONG_VALUE>[,<EXTRA_LONG_VALUE...]]
        (mutiple extras passed as Long[])
    [--elal <EXTRA_KEY> <EXTRA_LONG_VALUE>[,<EXTRA_LONG_VALUE...]]
        (mutiple extras passed as List<Long>)
    [--efa <EXTRA_KEY> <EXTRA_FLOAT_VALUE>[,<EXTRA_FLOAT_VALUE...]]
        (mutiple extras passed as Float[])
    [--efal <EXTRA_KEY> <EXTRA_FLOAT_VALUE>[,<EXTRA_FLOAT_VALUE...]]
        (mutiple extras passed as List<Float>)
    [--esa <EXTRA_KEY> <EXTRA_STRING_VALUE>[,<EXTRA_STRING_VALUE...]]
        (mutiple extras passed as String[]; to embed a comma into a string,
         escape it using "\,")
    [--esal <EXTRA_KEY> <EXTRA_STRING_VALUE>[,<EXTRA_STRING_VALUE...]]
        (mutiple extras passed as List<String>; to embed a comma into a string,
         escape it using "\,")
    [--grant-read-uri-permission] [--grant-write-uri-permission]
    [--grant-persistable-uri-permission] [--grant-prefix-uri-permission]
    [--debug-log-resolution] [--exclude-stopped-packages]
    [--include-stopped-packages]
    [--activity-brought-to-front] [--activity-clear-top]
    [--activity-clear-when-task-reset] [--activity-exclude-from-recents]
    [--activity-launched-from-history] [--activity-multiple-task]
    [--activity-no-animation] [--activity-no-history]
    [--activity-no-user-action] [--activity-previous-is-top]
    [--activity-reorder-to-front] [--activity-reset-task-if-needed]
    [--activity-single-top] [--activity-clear-task]
    [--activity-task-on-home]
    [--receiver-registered-only] [--receiver-replace-pending]
    [--selector]
    [<URI> | <PACKAGE> | <COMPONENT>]