赞
踩
1.字符串匹配
要确定一行字符串是否与指定的正则表达式匹配,使用regex_match。
下面这个代码可以验证szStr字串(定义在上面)是否与szReg匹配。
{ //字符串匹配
boost::regex reg( szReg );
bool r=boost::regex_match( szStr , reg);
assert(r); //是否匹配
}
{ //字符串匹配
boost::regex reg( szReg );
bool r=boost::regex_match( szStr , reg);
assert(r); //是否匹配
}
boost::regex的构造函数中还可以加入标记参数用于指定它的行为,如:
//指定使用perl语法(默认),忽略大小写。
boost::regex reg1( szReg, boost::regex::perl|boost::regex::icase );
//指定使用POSIX扩展语法(其实也差不多)
boost::regex reg2( szReg, boost::regex::extended );
//指定使用perl语法(默认),忽略大小写。
boost::regex reg1( szReg, boost::regex::perl|boost::regex::icase );
//指定使用POSIX扩展语法(其实也差不多)
boost::regex reg2( szReg, boost::regex::extended );
下面这个代码不仅验证是否匹配,而且可以从中提取出正则表达式括号对应的子串。
{ //提取子串
boost::cmatch mat;
boost::regex reg( szStr );
bool r=boost::regex_match( szStr, mat, reg);
if(r) //如果匹配成功
{
//显示所有子串
for(boost::cmatch::iterator itr=mat.begin(); itr!=mat.end(); ++itr)
{
// 指向子串对应首位置 指向子串对应尾位置 子串内容
cout << itr->first-szStr << ' ' << itr->second-szStr << ' ' << *itr << endl;
}
}
//也可直接取指定位置信息
if(mat[4].matched) cout << "Path is" << mat[4] << endl;
}
{ //提取子串
boost::cmatch mat;
boost::regex reg( szStr );
bool r=boost::regex_match( szStr, mat, reg);
if(r) //如果匹配成功
{
//显示所有子串
for(boost::cmatch::iterator itr=mat.begin(); itr!=mat.end(); ++itr)
{
// 指向子串对应首位置 指向子串对应尾位置 子串内容
cout << itr->first-szStr << ' ' << itr->second-szStr << ' ' << *itr << endl;
}
}
//也可直接取指定位置信息
if(mat[4].matched) cout << "Path is" << mat[4] << endl;
}
其中,boost::cmatch是一个针对C字符串的特化版本,它还有另三位兄弟,如下:
typedef match_results<const char*> cmatch;
typedef match_results<std::string::const_iterator> smatch;
typedef match_results<const wchar_t*> wcmatch;
typedef match_results<std::wstring::const_iterator> wsmatch;
可以把match_results看成是一个sub_match的容器,同时它还提供了format方法来代替regex_format函数。
一个sub_match就是一个子串,它从std::pair<BidiIterator, BidiIterator>继承而来,这个迭代器pair里的first和second分别指向了这个子串开始和结尾所在位置。同时,sub_match又提供了str(),length()方法来返回整个子串。
2.查找字符串
regex_match只验证是否完全匹配,如果想从一大串字符串里找出匹配的一小段字符串(比如从网页文件里找超链接),这时就要使用regex_search了。
下面这段代码从szStr中找数字
{ //查找
boost::cmatch mat;
boost::regex reg( "//d+" ); //查找字符串里的数字
if(boost::regex_search(szStr, mat, reg))
{
cout << "searched:" << mat[0] << endl;
}
}
{ //查找
boost::cmatch mat;
boost::regex reg( "//d+" ); //查找字符串里的数字
if(boost::regex_search(szStr, mat, reg))
{
cout << "searched:" << mat[0] << endl;
}
}
3.替换
regex_replace提供了简便的方法来部分替换源字符串
正则表达式中,使用$1~$9(或/1~/9)表示第几个子串,$&表示整个串,$`表示第一个串,$'表示最后未处理的串。
{ //替换1,把上面的HTTP的URL转成FTP的
boost::regex reg( szReg );
string s = boost::regex_replace( string(szStr), reg, "ftp://$2$5");
cout << "ftp site:"<< s << endl;
}
{ //替换1,把上面的HTTP的URL转成FTP的
boost::regex reg( szReg );
string s = boost::regex_replace( string(szStr), reg, "ftp://$2$5");
cout << "ftp site:"<< s << endl;
}
正则表达式中,使用(?1~?9新字串)表示把第几个子串替换成新字串
{ //替换2,使用format_all参数把<>&全部转换成网页字符
string s1 = "(<)|(>)|(&)";
string s2 = "(?1<)(?2>)(?3&)";
boost::regex reg( s1 );
string s = boost::regex_replace( string("cout << a&b << endl;"), reg, s2, boost::match_default | boost::format_all);
cout << "HTML:"<< s << endl;
}
4.使用regex_iterator查找
对应于C字符串和C++字符串以及宽字符,regex_iterator同样也有四个特化:
typedef regex_iterator<const char*> cregex_iterator;
typedef regex_iterator<std::string::const_iterator> sregex_iterator;
typedef regex_iterator<const wchar_t*> wcregex_iterator;
typedef regex_iterator<std::wstring::const_iterator> wsregex_iterator;
这个迭代器的value_type定义是一个match_results。
{ //使用迭代器找出所有数字
boost::regex reg( "//d+" ); //查找字符串里的数字
boost::cregex_iterator itrBegin(szStr, szStr+strlen(szStr), reg);
boost::cregex_iterator itrEnd;
for(boost::cregex_iterator itr=itrBegin; itr!=itrEnd; ++itr)
{
// 指向子串对应首位置 指向子串对应尾位置 子串内容
cout << (*itr)[0].first-szStr << ' ' << (*itr)[0].second-szStr << ' ' << *itr << endl;
}
}
{ //使用迭代器找出所有数字
boost::regex reg( "//d+" ); //查找字符串里的数字
boost::cregex_iterator itrBegin(szStr, szStr+strlen(szStr), reg);
boost::cregex_iterator itrEnd;
for(boost::cregex_iterator itr=itrBegin; itr!=itrEnd; ++itr)
{
// 指向子串对应首位置 指向子串对应尾位置 子串内容
cout << (*itr)[0].first-szStr << ' ' << (*itr)[0].second-szStr << ' ' << *itr << endl;
}
}
Boost.Regex也提供了make_regex_iterator函数简化regex_iterator的构造,如上面的itrBegin可以写成:
itrBegin = make_regex_iterator(szStr,reg);5.使用regex_token_iterator拆分字符串
它同样也有四个特化,形式和上面类似,就不再写一遍骗篇幅了。
这个迭代器的value_type定义是一个sub_match。
{ //使用迭代器拆分字符串
boost::regex reg("/"); //按/符拆分字符串
boost::cregex_token_iterator itrBegin(szStr, szStr+strlen(szStr), reg,-1);
boost::cregex_token_iterator itrEnd;
for(boost::cregex_token_iterator itr=itrBegin; itr!=itrEnd; ++itr)
{
cout << *itr << endl;
}
}
{ //使用迭代器拆分字符串
boost::regex reg("/"); //按/符拆分字符串
boost::cregex_token_iterator itrBegin(szStr, szStr+strlen(szStr), reg,-1);
boost::cregex_token_iterator itrEnd;
for(boost::cregex_token_iterator itr=itrBegin; itr!=itrEnd; ++itr)
{
cout << *itr << endl;
}
}
Boost.Regex也提供了make_regex_token_iterator函数简化regex_token_iterator的构造,最后的那个参数-1表示以reg为分隔标志拆分字符串,如果不是-1则表示取第几个子串,并且可以使用数组来表示同时要取几个子串,例如:
{ //使用迭代器拆分字符串2
boost::regex reg("(.)/(.)"); //取/的前一字符和后一字符(这个字符串形象貌似有点邪恶-_-)
int subs[] = {1,2}; // 第一子串和第二子串
boost::cregex_token_iterator itrBegin = make_regex_token_iterator(szStr,reg,subs); //使用-1参数时拆分,使用其它数字时表示取第几个子串,可使用数组取多个串
boost::cregex_token_iterator itrEnd;
for(boost::cregex_token_iterator itr=itrBegin; itr!=itrEnd; ++itr)
{
cout << *itr << endl;
}
}
完整测试代码:
#include <iostream>
#include <boost/regex.hpp>
using namespace std;
int main(int argc, char* argv[])
{ //( 1 ) (( 3 ) 2 )(( 5 )4)( 6 )
//(/w+)://((/w+/.)*/w+)((//w*)*)(//w+/./w+)?
//^协议://网址(x.x...x)/路径(n个/字串)/网页文件(xxx.xxx)
const char *szReg = "(//w+)://((//w+//.)*//w+)((///w*)*)(///w+//.//w+)?";
const char *szStr = "http://www.cppprog.com/2009/0112/48.html";
{ //字符串匹配
boost::regex reg( szReg );
bool r=boost::regex_match( szStr , reg);
assert(r);
}
{ //提取子串
boost::cmatch mat;
boost::regex reg( szReg );
bool r=boost::regex_match( szStr, mat, reg);
if(r) //如果匹配成功
{
//显示所有子串
for(boost::cmatch::iterator itr=mat.begin(); itr!=mat.end(); ++itr)
{
// 指向子串对应首位置 指向子串对应尾位置 子串内容
cout << itr->first-szStr << ' ' << itr->second-szStr << ' ' << *itr << endl;
}
}
//也可直接取指定位置信息
if(mat[4].matched) cout << "Path is" << mat[4] << endl;
}
{ //查找
boost::cmatch mat;
boost::regex reg( "//d+" ); //查找字符串里的数字
if(boost::regex_search(szStr, mat, reg))
{
cout << "searched:" << mat[0] << endl;
}
}
{ //替换
boost::regex reg( szReg );
string s = boost::regex_replace( string(szStr), reg, "ftp://$2$5");
cout << "ftp site:"<< s << endl;
}
{ //替换2,把<>&转换成网页字符
string s1 = "(<)|(>)|(&)";
string s2 = "(?1<)(?2>)(?3&)";
boost::regex reg( s1 );
string s = boost::regex_replace( string("cout << a&b << endl;"), reg, s2, boost::match_default | boost::format_all);
cout << "HTML:"<< s << endl;
}
{ //使用迭代器找出所有数字
boost::regex reg( "//d+" ); //查找字符串里的数字
boost::cregex_iterator itrBegin = make_regex_iterator(szStr,reg); //(szStr, szStr+strlen(szStr), reg);
boost::cregex_iterator itrEnd;
for(boost::cregex_iterator itr=itrBegin; itr!=itrEnd; ++itr)
{
// 指向子串对应首位置 指向子串对应尾位置 子串内容
cout << (*itr)[0].first-szStr << ' ' << (*itr)[0].second-szStr << ' ' << *itr << endl;
}
}
{ //使用迭代器拆分字符串
boost::regex reg("/"); //按/符拆分字符串
boost::cregex_token_iterator itrBegin = make_regex_token_iterator(szStr,reg,-1); //使用-1参数时拆分,使用其它数字时表示取第几个子串,可使用数组取多个串
boost::cregex_token_iterator itrEnd;
for(boost::cregex_token_iterator itr=itrBegin; itr!=itrEnd; ++itr)
{
cout << *itr << endl;
}
}
{ //使用迭代器拆分字符串2
boost::regex reg("(.)/(.)"); //取/的前一字符和后一字符(这个字符串形象貌似有点邪恶-_-)
int subs[] = {1,2}; // 第一子串和第二子串
boost::cregex_token_iterator itrBegin = make_regex_token_iterator(szStr,reg,subs); //使用-1参数时拆分,使用其它数字时表示取第几个子串,可使用数组取多个串
boost::cregex_token_iterator itrEnd;
for(boost::cregex_token_iterator itr=itrBegin; itr!=itrEnd; ++itr)
{
cout << *itr << endl;
}
}
cin.get();
return 0;
}
本文来自CSDN博客,转载请标明出处:http://blog.csdn.net/stormlk1983/archive/2009/07/10/4337793.aspx
Copyright © 2003-2013 www.wpsshop.cn 版权所有,并保留所有权利。