- 1组合数算法的非递归实现_组合 不用递归
- 2入门AI绘画 | 手把手教学Stable Diffusion，保姆级教程建议收藏！_stablediffusion秋叶整合安装包
- 3AI视频风格转换动漫风：Stable Diffusion+TemporalKit_stable diffusion中temporalkit
- 4ESP32CAM 视频小车_esp32cam小车
- 5Linux编辑器调试器 gcc/g++ gdb 编译过程及使用讲解_linux下gdb如何调试静态库.so文件
- 6Spring Boot中使用PostgreSQL数据库_springboot配置pg数据库
- 7lstm结构图_人人都能看懂的LSTM介绍及反向传播算法推导（非常详细）
- 8python打包成exe 明明存在文件却说不存在_pyinstaller说该文件已经存在,但它不存在...
- 9输入adb connect 提示由于目标计算机积极拒绝，无法连接。解决办法_adb connect 积极拒绝
- 10Android Studio 安装配置教程 - Windows(详细版)_android-studio-ide-173.4697961-windows
华为静态路由配置实验（超详细讲解+详细命令行）_华为静态路由命令
赞
踩
系列文章目录
华为数通学习（7）
前言
随着华为公司的不断发展，数据通信这门技术也越来越重要，很多人都开启了数据通信学习，本文就介绍了静态路由配置实验，是我们通过数通王国的第十五站（我们在文章中使用的是华为的ENSP软件）。
一，静态路由配置
二，网络地址配置
AR1的配置：
网络地址配置：
<ar1>sys
Enter system view, return user view with Ctrl+Z.
[ar1]interface GigabitEthernet 0/0/0
[ar1-GigabitEthernet0/0/0]ip address 10.1.12.1 24
[ar1-GigabitEthernet0/0/0]
Aug 30 2023 19:32:27-08:00 ar1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.
[ar1-GigabitEthernet0/0/0]q
AR2的配置：
网络地址配置：
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname ar2
[ar2]interface GigabitEthernet 0/0/0
[ar2-GigabitEthernet0/0/0]ip address 10.1.12.2 24
[ar2-GigabitEthernet0/0/0]int g 0/0/1
[ar2-GigabitEthernet0/0/1]ip address 10.1.23.2 24
AR3的配置：
网络地址配置：
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname ar3
[ar3]interface GigabitEthernet 0/0/1
[ar3-GigabitEthernet0/0/1]ip address 10.1.23.3 24
[ar3-GigabitEthernet0/0/1]
Aug 30 2023 19:36:50-08:00 ar3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.
[ar3-GigabitEthernet0/0/1]q
三，测试是否连通
AR1的配置:
[ar1]ping 10.1.23.2
PING 10.1.23.2: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
--- 10.1.23.2 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss
讲解：
不通是因为AR1和AR3处在同的网段
AR2的配置：
[ar2-GigabitEthernet0/0/0]ping 10.1.12.1
PING 10.1.12.1: 56 data bytes, press CTRL_C to break
Reply from 10.1.12.1: bytes=56 Sequence=1 ttl=255 time=260 ms
Reply from 10.1.12.1: bytes=56 Sequence=2 ttl=255 time=20 ms
Reply from 10.1.12.1: bytes=56 Sequence=3 ttl=255 time=30 ms
Reply from 10.1.12.1: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 10.1.12.1: bytes=56 Sequence=5 ttl=255 time=20 ms
--- 10.1.12.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/70/260 ms
讲解：
AR2可以ping通AR1是因为是直连路由
四，AR3配置回环ip地址
[ar3]interface LoopBack 1
[ar3-LoopBack1]ip address 1.1.1.1 32
[ar3-LoopBack1]interface LoopBack 2
[ar3-LoopBack2]ip address 2.2.2.2 32
[ar3-LoopBack2]interface LoopBack 3
[ar3-LoopBack3]ip address 3.3.3.3 32
讲解：
任何访问回环地址的AR3都会回复.
五，配置静态路由表
AR1的配置:
[ar1]display ip routing-table 3.3.3.3
[ar1]ip route-static 3.3.3.3 32 GigabitEthernet 0/0/0 10.1.12.2
[ar1]display ip routing-table 3.3.3.3
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Table : Public
Summary Count : 1
Destination/Mask Proto Pre Cost Flags NextHop Interface
3.3.3.3/32 Static 60 0 D 10.1.12.2 GigabitEthernet0/0/0
讲解：
可以看到外面在AR1中写了一个目的ip地址为3.3.3.3 32 ，接入口为GigabitEthernet 0/0/0，下一跳的IP地址是10.1.12.2的路由表
AR2的配置：
添加一个路由
[ar2]ip route-static 3.3.3.3 32 GigabitEthernet 0/0/1 10.1.23.3
查看已添加的路由
[ar2]display current-configuration | include ip rou
ip route-static 3.3.3.3 255.255.255.255 GigabitEthernet0/0/1 10.1.23.3
AR3的配置：
添加和查看的路由
[ar3]ip route-static 10.1.12.0 24 GigabitEthernet 0/0/1 10.1.23.2
[ar3]display ip routing-table 10.1.12.1
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Table : Public
Summary Count : 1
Destination/Mask Proto Pre Cost Flags NextHop Interface
10.1.12.0/24 Static 60 0 D 10.1.23.2 GigabitEthernet0/0/1
查看路由的总数：
[ar3]display current-configuration | include ip rou
ip route-static 10.1.12.0 255.255.255.0 GigabitEthernet0/0/1 10.1.23.2
六，测试回环地址是否能通
AR1的配置:
[ar1]ping 3.3.3.3
PING 3.3.3.3: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
--- 3.3.3.3 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss
讲解：
不通是因为没有回包
AR3的配置：
<ar3>ping 1.1.1.1
PING 1.1.1.1: 56 data bytes, press CTRL_C to break
Reply from 1.1.1.1: bytes=56 Sequence=1 ttl=255 time=20 ms
Reply from 1.1.1.1: bytes=56 Sequence=2 ttl=255 time=1 ms
Reply from 1.1.1.1: bytes=56 Sequence=3 ttl=255 time=1 ms
Reply from 1.1.1.1: bytes=56 Sequence=4 ttl=255 time=1 ms
Reply from 1.1.1.1: bytes=56 Sequence=5 ttl=255 time=1 ms
--- 1.1.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/4/20 ms
讲解：
证明回环地址是正常的
八，使AR1可以ping通AR3的回环地址
[ar1]ip route-static 10.1.23.0 24 GigabitEthernet 0/0/0 10.1.12.2
[ar1]ip route-static 1.1.1.1 32 GigabitEthernet 0/0/0 10.1.12.2
[ar1]ip route-static 2.2.2.2 32 GigabitEthernet 0/0/0 10.1.12.2
讲解：
为AR1配置三个路由，让AR1可以ping通AR3的回环地址
ping通过了
[ar1]ping 1.1.1.1
PING 1.1.1.1: 56 data bytes, press CTRL_C to break
Reply from 1.1.1.1: bytes=56 Sequence=1 ttl=254 time=40 ms
Reply from 1.1.1.1: bytes=56 Sequence=2 ttl=254 time=30 ms
Reply from 1.1.1.1: bytes=56 Sequence=3 ttl=254 time=20 ms
Reply from 1.1.1.1: bytes=56 Sequence=4 ttl=254 time=40 ms
Reply from 1.1.1.1: bytes=56 Sequence=5 ttl=254 time=30 ms
--- 1.1.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/32/40 ms
九，沉默路由的配置及其测试
清除配置的静态路由：
[ar1]undo ip route-static all
Warning: This operation may lead to the deletion of all the public IPv4 static routes and their configurations. Continue? [Y/N]:y
查看AR1是否有静态路由表
[ar1]dis ip routing-table protocol static
写一个静态路由
[ar1]ip route-static 0.0.0.0 0 GigabitEthernet 0/0/0 10.1.12.2
ping回环路由是可以通过的
[ar1]ping 1.1.1.1
PING 1.1.1.1: 56 data bytes, press CTRL_C to break
Reply from 1.1.1.1: bytes=56 Sequence=1 ttl=254 time=40 ms
Reply from 1.1.1.1: bytes=56 Sequence=2 ttl=254 time=30 ms
Reply from 1.1.1.1: bytes=56 Sequence=3 ttl=254 time=40 ms
Reply from 1.1.1.1: bytes=56 Sequence=4 ttl=254 time=20 ms
Reply from 1.1.1.1: bytes=56 Sequence=5 ttl=254 time=30 ms
--- 1.1.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/32/40 ms
查看AR1的静态路由表
[ar1]display ip routing-table protocol static
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Public routing table : Static
Destinations : 1 Routes : 1 Configured Routes : 1
Static routing table status : <Active>
Destinations : 1 Routes : 1
Destination/Mask Proto Pre Cost Flags NextHop Interface
0.0.0.0/0 Static 60 0 D 10.1.12.2 GigabitEthernet0/0/0
Static routing table status : <Inactive>
Destinations : 0 Routes : 0
测试通过
[ar1]ping -c 1 1.1.1.1
PING 1.1.1.1: 56 data bytes, press CTRL_C to break
Reply from 1.1.1.1: bytes=56 Sequence=1 ttl=254 time=30 ms
--- 1.1.1.1 ping statistics ---
1 packet(s) transmitted
1 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/30/30 ms
清除配置
[ar1]undo ip route-static all
Warning: This operation may lead to the deletion of all the public IPv4 static routes and their configurations. Continue? [Y/N]:y
Aug 30 2023 20:48:15-08:00 ar1 %%01RM/4/IPV4_DEFT_RT_CHG(l)[0]:IPV4 default Route is changed. (ChangeType=Delete, InstanceId=0, Protocol=Static, ExitIf=GigabitEthernet0/0/0, Nexthop=10.1.12.2, Neighbour=0.0.0.0, Preference=1006632960, Label=NULL, Metric=0)
测试不通
[ar1]ping -c 1 3.3.3.3
PING 3.3.3.3: 56 data bytes, press CTRL_C to break
Request time out
--- 3.3.3.3 ping statistics ---
1 packet(s) transmitted
0 packet(s) received
100.00% packet loss
[ar1]ping -c 1 1.1.1.1
PING 1.1.1.1: 56 data bytes, press CTRL_C to break
Request time out
--- 1.1.1.1 ping statistics ---
1 packet(s) transmitted
0 packet(s) received
100.00% packet loss
十，所有路由器的路由表的配置
AR1写的路由
ip route-static 3.3.3.3 255.255.255.255 GigabitEthernet0/0/0 10.1.12.2
ip route-static 10.1.23.0 24 GigabitEthernet 0/0/0 10.1.12.2
ip route-static 1.1.1.1 32 GigabitEthernet 0/0/0 10.1.12.2
ip route-static 2.2.2.2 32 GigabitEthernet 0/0/0 10.1.12.2
AR2写的路由
ip route-static 3.3.3.3 255.255.255.255 GigabitEthernet0/0/1 10.1.23.3
ip route-static 2.2.2.2 32 GigabitEthernet 0/0/1 10.1.23.3
ip route-static 1.1.1.1 32 GigabitEthernet 0/0/1 10.1.23.3
AR3写的路由
ip route-static 10.1.12.0 255.255.255.0 GigabitEthernet0/0/1 10.1.23.2
总结
恭喜你，你通过本章的学习了静态路由配置实验，华为数通还有很多宝藏等着你去探险，加油！只为成为更好的自己。
