内核启动卡住了_rk3588 启动卡死

Xshell 6 (Build 0109)
Copyright (c) 2002 NetSarang Computer, Inc. All rights reserved.

Type `help' to learn how to use Xshell prompt.
[C:\~]$ 

Connecting to COM3...
Connected.

-DDR V1.14 b1f29a2a6f typ 22/09/02-16:40:04
In
ddrconfig:0
LP4 MR14:0x4d
LPDDR4, 324MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
tdqss: cs0 dqs0: 48ps, dqs1: -72ps, dqs2: -72ps, dqs3: -120ps, 

change to: 324MHz
PHY drv:clk:38,ca:38,DQ:30,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x61

change to: 528MHz
PHY drv:clk:38,ca:38,DQ:30,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 780MHz
PHY drv:clk:38,ca:38,DQ:30,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 1560MHz(final freq)
PHY drv:clk:38,ca:38,DQ:30,odt:60
vrefinner:16%, vrefout:29%
dram drv:40,odt:80
vref_ca:00000068
clk skew:0x2b
cs 0:
the read training result:
DQS0:0x36, DQS1:0x2e, DQS2:0x31, DQS3:0x32, 
min  :0x10 0x11 0x13  0xe  0x2  0x5  0xb  0xa , 0x7  0x1  0x8  0x3  0x9  0x7  0xc  0x7 ,
       0x4  0x4  0x5  0x1  0x3  0x6  0x9  0xa , 0xc  0x5  0x5  0x3 0x15 0x12  0xf  0xf ,
mid  :0x27 0x28 0x2a 0x25 0x17 0x1b 0x20 0x1e ,0x19 0x18 0x1b 0x1a 0x1c 0x1d 0x20 0x1d ,
      0x19 0x1a 0x1e 0x14 0x1a 0x1d 0x1d 0x21 ,0x23 0x1c 0x1b 0x19 0x28 0x2b 0x26 0x27 ,
max  :0x3f 0x40 0x41 0x3d 0x2c 0x31 0x35 0x33 ,0x2b 0x2f 0x2f 0x31 0x30 0x33 0x34 0x34 ,
      0x2f 0x31 0x37 0x28 0x32 0x35 0x32 0x39 ,0x3a 0x33 0x31 0x2f 0x3c 0x45 0x3d 0x3f ,
range:0x2f 0x2f 0x2e 0x2f 0x2a 0x2c 0x2a 0x29 ,0x24 0x2e 0x27 0x2e 0x27 0x2c 0x28 0x2d ,
      0x2b 0x2d 0x32 0x27 0x2f 0x2f 0x29 0x2f ,0x2e 0x2e 0x2c 0x2c 0x27 0x33 0x2e 0x30 ,
the write training result:
DQS0:0x34, DQS1:0x1d, DQS2:0x1d, DQS3:0x14, 
min  :0x6a 0x6e 0x6f 0x6d 0x5c 0x60 0x67 0x68 0x67 ,0x4f 0x52 0x54 0x55 0x56 0x58 0x5a 0x58 0x55 ,
      0x4d 0x51 0x52 0x4d 0x4f 0x52 0x52 0x58 0x54 ,0x49 0x47 0x44 0x45 0x55 0x56 0x52 0x53 0x4a ,
mid  :0x86 0x88 0x8a 0x87 0x75 0x79 0x80 0x82 0x82 ,0x6a 0x6b 0x6c 0x6e 0x6e 0x70 0x72 0x71 0x6d ,
      0x68 0x6b 0x6b 0x67 0x68 0x6b 0x6a 0x71 0x6e ,0x65 0x61 0x5d 0x5f 0x6e 0x70 0x6a 0x6d 0x62 ,
max  :0xa2 0xa2 0xa6 0xa1 0x8e 0x92 0x99 0x9d 0x9e ,0x86 0x84 0x84 0x88 0x87 0x88 0x8a 0x8a 0x86 ,
      0x84 0x86 0x84 0x82 0x82 0x84 0x83 0x8a 0x88 ,0x81 0x7b 0x77 0x79 0x88 0x8a 0x82 0x88 0x7a ,
range:0x38 0x34 0x37 0x34 0x32 0x32 0x32 0x35 0x37 ,0x37 0x32 0x30 0x33 0x31 0x30 0x30 0x32 0x31 ,
      0x37 0x35 0x32 0x35 0x33 0x32 0x31 0x32 0x34 ,0x38 0x34 0x33 0x34 0x33 0x34 0x30 0x35 0x30 ,
CA Training result:
cs:0 min  :0x44 0x42 0x3e 0x38 0x3d 0x34 0x40 ,0x46 0x40 0x40 0x38 0x3b 0x35 0x40 ,
cs:0 mid  :0x83 0x82 0x7c 0x76 0x79 0x73 0x6d ,0x84 0x7f 0x7c 0x77 0x77 0x74 0x6b ,
cs:0 max  :0xc2 0xc2 0xba 0xb5 0xb5 0xb3 0x9b ,0xc2 0xbf 0xb9 0xb7 0xb4 0xb3 0x97 ,
cs:0 range:0x7e 0x80 0x7c 0x7d 0x78 0x7f 0x5b ,0x7c 0x7f 0x79 0x7f 0x79 0x7e 0x57 ,
out
U-Boot SPL board init
U-Boot SPL 2017.09-gaaca6ffec1-211203 #zzz (Dec 03 2021 - 18:42:16)
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC error: The cmd index is 1, ret is -110
Card did not respond to voltage select!
mmc_init: -95, time 9
spl: mmc init failed with error: -95
Trying to boot from MMC1
Magic is incorrect.
Error validating A/B metadata from disk. Resetting and writing new A/B metadata to disk.
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(32fbfe6139...) + OK
## Checking uboot 0x00a00000 ... sha256(e3af6de0da...) + OK
## Checking fdt 0x00b38fe8 ... sha256(fcfda359c0...) + OK
## Checking atf-2 0xfdcc1000 ... sha256(9662321b37...) + OK
## Checking atf-3 0x0006a000 ... sha256(d959b30fef...) + OK
## Checking atf-4 0xfdcd0000 ... sha256(b46eaa95b8...) + OK
## Checking atf-5 0xfdcce000 ... sha256(2f8839c803...) + OK
## Checking atf-6 0x00068000 ... sha256(6e9d32ba23...) + OK
## Checking optee 0x08400000 ... sha256(af414b9c9f...) + OK
Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
Total: 239.241 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-389-g4613ae965:cl
NOTICE:  BL31: Built : 11:21:14, Jul  7 2022
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    pmu v1 is valid 220114
INFO:    dfs DDR fsp_param[0].freq_mhz= 1560MHz
INFO:    dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO:    dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO:    dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
I/TC: 
I/TC: OP-TEE version: 3.13.0-651-gd84087907 #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 Fri Sep 16 15:39:33 CST 2022 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0xa00000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-dirty #liuyuan (Oct 31 2022 - 13:07:17 +0800)

Model: Rockchip RK3568 Evaluation Board
PreSerial: 2, raw, 0xfe660000
DRAM:  2 GiB
Sysmem: init
Relocation Offset: 7d23f000
Relocation fdt: 7b9f8cc0 - 7b9fecd8
CR: M/C/I
Using default environment

dwmmc@fe2b0000: 1, dwmmc@fe2c0000: 2, sdhci@fe310000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v1
boot mode: recovery (misc)
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
vsel-gpios- not found! Error: -2
vdd_cpu init 900000 uV
PMIC:  RK8090 (on=0x40, off=0x00)
vdd_logic init 900000 uV
vdd_gpu init 900000 uV
vdd_npu init 900000 uV
io-domain: OK
INFO:    ddr dmc_fsp already initialized in loader.
Could not find baseparameter partition
Model: Rockchip RK3568 EVB2 LP4X V10 Board
Rockchip UBOOT DRM driver version: v1.0.1
VOP have 2 active VP
vp0 have layer nr:3[1 3 5 ], primary plane: 5
vp1 have layer nr:3[0 2 4 ], primary plane: 4
vp2 have layer nr:0[], primary plane: 0
Using display timing dts
dsi@fe060000:  detailed mode clock 132000 kHz, flags[8000000a]
    H: 1080 1095 1097 1127
    V: 1920 1935 1937 1952
bus_format: 100e
VOP update mode to: 1080x1920p60, type: MIPI0 for VP1
VP1 set crtc_clock to 132000KHz
VOP VP1 enable Smart0[654x270->654x270@213x825] fmt[2] addr[0x7df04000]
final DSI-Link bandwidth: 876 Mbps x 4
xfer: num: 2, addr: 0x50
xfer: num: 2, addr: 0x50
Monitor has basic audio support
Could not find baseparameter partition
mode:3840x2160
hdmi@fe0a0000:  detailed mode clock 594000 kHz, flags[5]
    H: 3840 4016 4104 4400
    V: 2160 2168 2178 2250
bus_format: 2025
VOP update mode to: 3840x2160p60, type: HDMI0 for VP0
VP0 set crtc_clock to 594000KHz
VOP VP0 enable Smart1[654x270->654x270@1593x945] fmt[2] addr[0x7df04000]
CEA mode used vic=97
final pixclk = 594000000 tmdsclk = 594000000
xfer: num: 2, addr: 0x54
xfer: num: 1, addr: 0x54
[dw_hdmi_i2c_write] write offset 03 success
xfer: num: 2, addr: 0x54
xfer: num: 1, addr: 0x54
[dw_hdmi_i2c_write] write offset 21 success
PHY powered down in 0 iterations
xfer: num: 2, addr: 0x54
xfer: num: 1, addr: 0x54
[dw_hdmi_i2c_write] write offset 21 success
PHY PLL locked 1 iterations
PHY powered down in 0 iterations
xfer: num: 2, addr: 0x54
xfer: num: 1, addr: 0x54
[dw_hdmi_i2c_write] write offset 21 success
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=594.000MHz N=10240 cts=990000
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  apll 1416000 KHz
  dpll 780000 KHz
  gpll 1188000 KHz
  cpll 1000000 KHz
  npll 1200000 KHz
  vpll 660000 KHz
  hpll 594000 KHz
  ppll 200000 KHz
  armclk 1416000 KHz
  aclk_bus 150000 KHz
  pclk_bus 100000 KHz
  aclk_top_high 500000 KHz
  aclk_top_low 400000 KHz
  hclk_top 150000 KHz
  pclk_top 100000 KHz
  aclk_perimid 300000 KHz
  hclk_perimid 150000 KHz
  pclk_pmu 100000 KHz
Net:   No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "recovery"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image at 0x78c8c280 with size 0x02b6ba00
Fdt Ramdisk skip relocation
## Loading kernel from FIT Image at 78c8c280 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0x78ca7480
     Data Size:    34888192 Bytes = 33.3 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00280000
     Entry Point:  0x00280000
     Hash algo:    sha256
     Hash value:   36373603cccdac0f5089742dcdc327633197a1fef2e544d4048eef06c74273d2
   Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at 78c8c280 ...
   Using 'conf' configuration
   Trying 'ramdisk' ramdisk subimage
     Description:  unavailable
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0x7adece80
     Data Size:    10529865 Bytes = 10 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x0a200000
     Entry Point:  unavailable
     Hash algo:    sha256
     Hash value:   08443c7e56e1edff32fad3c4f7c6ae18165da5a05ae1c2a902666a7313d152e6
   Verifying Hash Integrity ... sha256+ OK
   Loading ramdisk from 0x7adece80 to 0x0a200000
## Loading fdt from FIT Image at 78c8c280 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x78c8ca80
     Data Size:    108821 Bytes = 106.3 KiB
     Architecture: AArch64
     Load Address: 0x08300000
     Hash algo:    sha256
     Hash value:   77b792b9366f4401d467a7c7fc30aeda4c639cc6ca063319c7faa4c9fde52283
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x08300000 to 0x08300000
   Booting using the fdt blob at 0x08300000
   Loading Kernel Image from 0x78ca7480 to 0x00280000 ... OK
   kernel loaded at 0x00280000, end = 0x023c5a00
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831d914
vp0, plane_mask:0x2a, primary-id:5, curser-id:-1
vp1, plane_mask:0x15, primary-id:4, curser-id:-1
vp2, plane_mask:0x0, primary-id:0, curser-id:-1
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0x80000000 (size: 0x76c00000)
== DO RELOCATE == Kernel from 0x00280000 to 0x00200000
Total: 1767.927 ms

Starting kernel ...

[    1.836785] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    1.836807] Linux version 5.10.110 (liuyuan@boardcon) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Mon Oct 31 13:08:02 CST 2022
[    1.840944] Machine model: Rockchip RK3568 EVB2 LP4X V10 Board
[    1.841004] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[    1.845150] printk: bootconsole [uart8250] enabled
[    1.846546] efi: UEFI not found.
[    1.879748] Zone ranges:
[    1.879996]   DMA      [mem 0x0000000000200000-0x000000007fffffff]
[    1.880569]   DMA32    empty
[    1.880836]   Normal   empty
[    1.881102] Movable zone start for each node
[    1.881492] Early memory node ranges
[    1.881820]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    1.882395]   node   0: [mem 0x0000000009400000-0x000000007fffffff]
[    1.882971] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[    1.898654] cma: Reserved 16 MiB at 0x000000007e800000
[    1.899209] psci: probing for conduit method from DT.
[    1.899682] psci: PSCIv1.1 detected in firmware.
[    1.900107] psci: Using standard PSCI v0.2 function IDs
[    1.900589] psci: Trusted OS migration not required
[    1.901038] psci: SMC Calling Convention v1.2
[    1.901782] percpu: Embedded 30 pages/cpu s83416 r8192 d31272 u122880
[    1.902489] Detected VIPT I-cache on CPU0
[    1.902896] CPU features: detected: GIC system register CPU interface
[    1.903487] CPU features: detected: Virtualization Host Extensions
[    1.904059] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    1.904706] alternatives: patching kernel code
[    1.906968] Built 1 zonelists, mobility grouping on.  Total pages: 511496
[    1.907596] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0 root=PARTUUID=614e0000-0000
[    1.910077] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.910993] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.911703] mem auto-init: stack:off, heap alloc:off, heap free:off
[    1.937275] Memory: 1975584K/2078720K available (18496K kernel code, 3158K rwdata, 5860K rodata, 6464K init, 530K bss, 86752K reserved, 16384K cma-reserved)
[    1.938670] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    1.939297] ftrace: allocating 55319 entries in 217 pages
[    2.010981] ftrace: allocated 217 pages with 5 groups
[    2.011764] rcu: Hierarchical RCU implementation.
[    2.012202] rcu: 	RCU event tracing is enabled.
[    2.012618] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    2.013216] 	Rude variant of Tasks RCU enabled.
[    2.013632] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    2.014325] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    2.019267] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    2.020961] GICv3: GIC: Using split EOI/Deactivate mode
[    2.021450] GICv3: 320 SPIs implemented
[    2.021803] GICv3: 0 Extended SPIs implemented
[    2.022245] GICv3: Distributor has no Range Selector support
[    2.022769] GICv3: 16 PPIs implemented
[    2.023151] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[    2.023888] ITS [mem 0xfd440000-0xfd45ffff]
[    2.024336] ITS@0x00000000fd440000: allocated 8192 Devices @25d0000 (indirect, esz 8, psz 64K, shr 0)
[    2.025205] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @25e0000 (flat, esz 2, psz 64K, shr 0)
[    2.026137] ITS: using cache flushing for cmd queue
[    2.026837] GICv3: using LPI property table @0x00000000025f0000
[    2.027471] GIC: using cache flushing for LPI property table
[    2.027993] GICv3: CPU0: using allocated LPI pending table @0x0000000002600000
[    2.028787] random: get_random_bytes called from start_kernel+0x3e8/0x648 with crng_init=0
[    2.054300] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    2.055625] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    2.056616] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    2.058104] Console: colour dummy device 80x25
[    2.058540] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    2.059483] pid_max: default: 32768 minimum: 301
[    2.060017] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    2.060702] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    2.062644] rcu: Hierarchical SRCU implementation.
[    2.063735] Platform MSI: interrupt-controller@fd440000 domain created
[    2.064641] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created
[    2.065661] EFI services will not be available.
[    2.066345] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[    2.067965] Detected VIPT I-cache on CPU1
[    2.067996] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[    2.068015] GICv3: CPU1: using allocated LPI pending table @0x0000000002610000
[    2.068068] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    2.069319] Detected VIPT I-cache on CPU2
[    2.069344] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[    2.069359] GICv3: CPU2: using allocated LPI pending table @0x0000000002620000
[    2.069396] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    2.070601] Detected VIPT I-cache on CPU3
[    2.070624] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[    2.070638] GICv3: CPU3: using allocated LPI pending table @0x0000000002630000
[    2.070673] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    2.070761] smp: Brought up 1 node, 4 CPUs
[    2.077945] SMP: Total of 4 processors activated.
[    2.078378] CPU features: detected: Privileged Access Never
[    2.078888] CPU features: detected: User Access Override
[    2.079375] CPU features: detected: 32-bit EL0 Support
[    2.079862] CPU features: detected: Common not Private translations
[    2.080437] CPU features: detected: RAS Extension Support
[    2.080932] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    2.081719] CPU features: detected: CRC32 instructions
[    2.082190] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    2.082827] CPU features: detected: RCpc load-acquire (LDAPR)
[    2.083432] CPU: All CPU(s) started at EL2
[    2.084769] devtmpfs: initialized
[    2.098109] Registered cp15_barrier emulation handler
[    2.098590] Registered setend emulation handler
[    2.099149] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    2.100051] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    2.101183] pinctrl core: initialized pinctrl subsystem
[    2.102203] DMI not present or invalid.
[    2.102803] NET: Registered protocol family 16
[    2.104724] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    2.105528] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    2.108182] thermal_sys: Registered thermal governor 'fair_share'
[    2.108189] thermal_sys: Registered thermal governor 'step_wise'
[    2.108775] thermal_sys: Registered thermal governor 'user_space'
[    2.109327] thermal_sys: Registered thermal governor 'power_allocator'
[    2.110105] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    2.111488] cpuidle: using governor menu
[    2.111866] Registered FIQ tty driver
[    2.112433] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    2.113163] ASID allocator initialised with 65536 entries
[    2.115581] ramoops: dmesg-0	0x20000@0x0000000000110000
[    2.116087] ramoops: console	0x80000@0x0000000000130000
[    2.116580] ramoops: pmsg	0x50000@0x00000000001b0000
[    2.117363] printk: console [ramoops-1] enabled
[    2.117780] pstore: Registered ramoops as persistent store backend
[    2.118348] ramoops: using 0xf0000@0x110000, ecc: 0
[    2.147921] rockchip-gpio fdd60000.gpio0: probed /pinctrl/gpio0@fdd60000
[    2.149030] rockchip-gpio fe740000.gpio1: probed /pinctrl/gpio1@fe740000
[    2.150077] rockchip-gpio fe750000.gpio2: probed /pinctrl/gpio2@fe750000
[    2.151173] rockchip-gpio fe760000.gpio3: probed /pinctrl/gpio3@fe760000
[    2.152184] rockchip-gpio fe770000.gpio4: probed /pinctrl/gpio4@fe770000
[    2.152868] rockchip-pinctrl pinctrl: probed pinctrl
[    2.172447] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    2.172976] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    2.173530] fiq_debugger_probe: could not install nmi irq handler
[[    2.174169] printk: console [ttyFIQ0] enabled
    2.174169] printk: console [ttyFIQ0] enabled
[    2.174957] printk: bootconsole [uart8250] disabled
[    2.174957] printk: bootconsole [uart8250] disabled
[    2.175564] Registered fiq debugger ttyFIQ0
[    2.176250] vcc3v3_sys: supplied by dc_12v
[    2.176498] vcc5v0_sys: supplied by dc_12v
[    2.176728] vcc5v0_usb: supplied by dc_12v
[    2.177133] vcc5v0_host: supplied by vcc5v0_usb
[    2.177516] vcc5v0_otg: supplied by vcc5v0_usb
[    2.178089] vcc2v5-sys: supplied by vcc3v3_sys
[    2.178319] vcc3v3_bu: supplied by vcc5v0_sys
[    2.179389] iommu: Default domain type: Translated 
[    2.179595] rk_iommu fde4b000.iommu: version = 2
[    2.180048] rk_iommu fdea0800.iommu: version = 2
[    2.180335] rk_iommu fded0480.iommu: version = 2
[    2.180641] rk_iommu fdee0800.iommu: version = 2
[    2.180919] rk_iommu fdef0800.iommu: version = 2
[    2.181166] rk_iommu fdf40f00.iommu: version = 2
[    2.181461] rk_iommu fdf80800.iommu: version = 2
[    2.181703] rk_iommu fe043e00.iommu: version = 2
[    2.182350] SCSI subsystem initialized
[    2.182567] usbcore: registered new interface driver usbfs
[    2.182608] usbcore: registered new interface driver hub
[    2.182645] usbcore: registered new device driver usb
[    2.182727] mc: Linux media interface: v0.10
[    2.182752] videodev: Linux video capture interface: v2.00
[    2.182813] pps_core: LinuxPPS API ver. 1 registered
[    2.182821] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.182840] PTP clock support registered
[    2.183472] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    2.183531] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    2.185237] Advanced Linux Sound Architecture Driver Initialized.
[    2.185621] Bluetooth: Core ver 2.22
[    2.185657] NET: Registered protocol family 31
[    2.185665] Bluetooth: HCI device and connection manager initialized
[    2.185678] Bluetooth: HCI socket layer initialized
[    2.185688] Bluetooth: L2CAP socket layer initialized
[    2.185706] Bluetooth: SCO socket layer initialized
[    2.186154] rockchip-cpuinfo cpuinfo: SoC		: 35682000
[    2.186166] rockchip-cpuinfo cpuinfo: Serial		: abbf845839edac9a
[    2.186805] clocksource: Switched to clocksource arch_sys_counter
[    2.608959] NET: Registered protocol family 2
[    2.609134] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    2.610189] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    2.610269] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.610357] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    2.610545] TCP: Hash tables configured (established 16384 bind 16384)
[    2.610668] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.610702] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.610844] NET: Registered protocol family 1
[    2.611286] RPC: Registered named UNIX socket transport module.
[    2.611297] RPC: Registered udp transport module.
[    2.611303] RPC: Registered tcp transport module.
[    2.611309] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.612158] PCI: CLS 0 bytes, default 64
[    2.612662] Trying to unpack rootfs image as initramfs...
[    2.961498] Freeing initrd memory: 10280K
[    2.962358] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
[    2.966023] Initialise system trusted keyrings
[    2.966157] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    2.969773] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.970286] NFS: Registering the id_resolver key type
[    2.970313] Key type id_resolver registered
[    2.970320] Key type id_legacy registered
[    2.970350] ntfs: driver 2.1.32 [Flags: R/O].
[    2.970525] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    2.970779] fuse: init (API version 7.32)
[    2.971048] SGI XFS with security attributes, no debug enabled
[    3.003018] NET: Registered protocol family 38
[    3.003047] Key type asymmetric registered
[    3.003055] Asymmetric key parser 'x509' registered
[    3.003094] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    3.003103] io scheduler mq-deadline registered
[    3.003111] io scheduler kyber registered
[    3.012501] rockchip-snps-pcie3-phy fe8c0000.phy: failed to find rockchip,pipe_grf regmap
[    3.014982] rk-pcie 3c0000000.pcie: invalid prsnt-gpios property in node
[    3.015299] rk-pcie 3c0800000.pcie: invalid prsnt-gpios property in node
[    3.015695] pwm-backlight backlight: supply power not found, using dummy regulator

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500

提示：
[    3.012501] rockchip-snps-pcie3-phy fe8c0000.phy: failed to find rockchip,pipe_grf regmap
[    3.014982] rk-pcie 3c0000000.pcie: invalid prsnt-gpios property in node
[    3.015299] rk-pcie 3c0800000.pcie: invalid prsnt-gpios property in node
[    3.015695] pwm-backlight backlight: supply power not found, using dummy regulator

内核打印到这里就停住了，重点查看pcie
1
2
3
4
5
6
7

解决：
&pcie3x2 {
	reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie>;
+//	status = "okay";
+	status = "disabled";
};
1
2
3
4
5
6
7