一.部署说明
1.1 实施环境
本文档实验环境如下：
PGSQL主机: 192.168.1.45
PGSQL备机: 192.168.1.50
软件和系统版本
Pgsql 版本: pgsql 9.2.4
Linux 版本: Redhat 5.8
pgpool版本：pgpool-II version 3.3.4 (tokakiboshi)
1.2 文档说明
在postgresql 的stream replication配置一文我们实现了postgresql的stream replication，实现了postgresql的热备。而实际生产中集群的目的之一就是负载均衡。那我们系统为例，刚开始java程序需要修改数据源，将查询的压力分担给从机，对数据的修改设置为主机。但是这种方式不灵活，负载不能均衡，并且比较麻烦。所以如果此时有一个路由控制器多好，可以根据请求将请求分发给不同的数据库。刚好，pgpoool就是这么一个中间件，负责与数据库集群交互，对外提供统一的访问接口，使得程序对数据库的访问变得简单，提高整个系统的性能。本文主要配置pgpool的负载均衡，是在上篇博文：PostgreSQL的HA解决方案-1主从和备份（master/slave and backup） 的基础之上配置的。
为了试验减少不必要的麻烦，本系列试验中，各个主机之间的通信，都是设置为无密码访问，且关闭主从的防火墙，但对于实际生产，需要根据实际需要，配置密码，增强集群的安全性。
二.配置步骤
1.1 源码安装pgpool。参考中文手册：http://pgpool.projects.pgfoundry.org/pgpool-II/doc/pgpool-zh_cn.html#install。
1.2 安装pgpool中提供的工具。安装 pgpool_regclass。注意 pgpool_regclass是在你解压pgpool后的目录中的sql目录下，而不是你的安装目录。
pgpool_regclass主要作用是，方便在数据库查询中，查询关于pgpool的的配置参数，监控信息等，请仔细阅读中文手册。应在在每台通过 pgpool-II 访问的数据库中执行 pgpool-regclass.sql。你不需要在你执行“psql -f pgpool-regclass.sql template1”后建立的数据库中这么做，因为这个模板数据库将被克隆成新建的数据库。
cd pgpool-II-x.x.x/sql/pgpool-regclass make make install psql -f pgpool-regclass.sql template1
安装之后，再在/usr/local/pgsql/share/extension/目录下多出如下文件：
-rw-r--r-- 1 root root 152 Sep 10 09:29 pgpool_regclass.control -rw-r--r-- 1 root root 283 Sep 10 09:29 pgpool_regclass--1.0.sql -rw-r--r-- 1 root root 142 Sep 10 09:29 pgpool-regclass.sql
1.3 配置pgpool的配置文件。
主要配置：
listen_addresses="*" port=5433 backend_hostname0="localhost" backend_port0="5432" backend_weight0=1 backend_hostname1="192.168.57.175" backend_port1="5432" backend_weight1=1 replication_mode=off load_balance_mode=on master_slave_mode=on master_save_sub_mode="stream" parallel_mode=off
详细配置：
# ---------------------------- # pgPool-II configuration file # ---------------------------- # # This file consists of lines of the form: # # name = value # # Whitespace may be used. Comments are introduced with "#" anywhere on a line. # The complete list of parameter names and allowed values can be found in the # pgPool-II documentation. # # This file is read on server startup and when the server receives a SIGHUP # signal. If you edit the file on a running system, you have to SIGHUP the # server for the changes to take effect, or use "pgpool reload". Some # parameters, which are marked below, require a server shutdown and restart to # take effect. # #------------------------------------------------------------------------------ # CONNECTIONS #------------------------------------------------------------------------------ # - pgpool Connection Settings - #listen_addresses = 'localhost' listen_addresses = '*' # Host name or IP address to listen on: # '*' for all, '' for no TCP/IP connections # (change requires restart) port = 9999 # Port number # (change requires restart) socket_dir = '/tmp' # Unix domain socket path # The Debian package defaults to # /var/run/postgresql # (change requires restart) # - pgpool Communication Manager Connection Settings - pcp_port = 9898 # Port number for pcp # (change requires restart) pcp_socket_dir = '/tmp' # Unix domain socket path for pcp # The Debian package defaults to # /var/run/postgresql # (change requires restart) # - Backend Connection Settings - #backend_hostname0 = 'host1' backend_hostname0 = '192.168.1.45' # Host name or IP address to connect to for backend 0 backend_port0 = 5432 # Port number for backend 0 backend_weight0 = 1 # Weight for backend 0 (only in load balancing mode) #backend_data_directory0 = '/data' # Data directory for backend 0 backend_flag0 = 'ALLOW_TO_FAILOVER' # Controls various backend behavior # ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER backend_hostname1 = '192.168.1.50' backend_port1 = 5432 backend_weight1 = 1 #backend_data_directory1 = '/data1' backend_flag1 = 'ALLOW_TO_FAILOVER' # - Authentication - enable_pool_hba = on # Use pool_hba.conf for client authentication pool_passwd = 'pool_passwd' # File name of pool_passwd for md5 authentication. # "" disables pool_passwd. # (change requires restart) authentication_timeout = 60 # Delay in seconds to complete client authentication # 0 means no timeout. # - SSL Connections - ssl = off # Enable SSL support # (change requires restart) #ssl_key = './server.key' # Path to the SSL private key file # (change requires restart) #ssl_cert = './server.cert' # Path to the SSL public certificate file # (change requires restart) #ssl_ca_cert = '' # Path to a single PEM format file # containing CA root certificate(s) # (change requires restart) #ssl_ca_cert_dir = '' # Directory containing CA root certificate(s) # (change requires restart) #------------------------------------------------------------------------------ # POOLS #------------------------------------------------------------------------------ # - Pool size - num_init_children = 10 # Number of pools # (change requires restart) max_pool = 2 # Number of connections per pool # (change requires restart) # - Life time - child_life_time = 300 # Pool exits after being idle for this many seconds child_max_connections = 0 # Pool exits after receiving that many connections # 0 means no exit connection_life_time = 0 # Connection to backend closes after being idle for this many seconds # 0 means no close client_idle_limit = 0 # Client is disconnected after being idle for that many seconds # (even inside an explicit transactions!) # 0 means no disconnection #------------------------------------------------------------------------------ # LOGS #------------------------------------------------------------------------------ # - Where to log - log_destination = 'stderr' # Where to log # Valid values are combinations of stderr, # and syslog. Default to stderr. # - What to log - print_timestamp = on # Print timestamp on each line # (change requires restart) log_connections = on # Log connections log_hostname = on # Hostname will be shown in ps status # and in logs if connections are logged log_statement = on # Log all statements log_per_node_statement = off # Log all statements # with node and backend informations log_standby_delay = 'none' # Log standby delay # Valid values are combinations of always, # if_over_threshold, none # - Syslog specific - syslog_facility = 'LOCAL0' # Syslog local facility. Default to LOCAL0 syslog_ident = 'pgpool' # Syslog program identification string # Default to 'pgpool' # - Debug - debug_level = 0 # Debug message verbosity level # 0 means no message, 1 or more mean verbose #------------------------------------------------------------------------------ # FILE LOCATIONS #------------------------------------------------------------------------------ pid_file_name = '/var/run/pgpool/pgpool.pid' # PID file name # (change requires restart) logdir = '/tmp' # Directory of pgPool status file # (change requires restart) #------------------------------------------------------------------------------ # CONNECTION POOLING #------------------------------------------------------------------------------ connection_cache = on # Activate connection pools # (change requires restart) # Semicolon separated list of queries # to be issued at the end of a session # The default is for 8.3 and later reset_query_list = 'ABORT; DISCARD ALL' # The following one is for 8.2 and before #reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT' #------------------------------------------------------------------------------ # REPLICATION MODE #------------------------------------------------------------------------------ replication_mode = off # Activate replication mode # (change requires restart) replicate_select = off # Replicate SELECT statements # when in replication or parallel mode # replicate_select is higher priority than # load_balance_mode. insert_lock = on # Automatically locks a dummy row or a table # with INSERT statements to keep SERIAL data # consistency # Without SERIAL, no lock will be issued lobj_lock_table = '' # When rewriting lo_creat command in # replication mode, specify table name to # lock # - Degenerate handling - replication_stop_on_mismatch = off # On disagreement with the packet kind # sent from backend, degenerate the node # which is most likely "minority" # If off, just force to exit this session failover_if_affected_tuples_mismatch = off # On disagreement with the number of affected # tuples in UPDATE/DELETE queries, then # degenerate the node which is most likely # "minority". # If off, just abort the transaction to # keep the consistency #------------------------------------------------------------------------------ # LOAD BALANCING MODE #------------------------------------------------------------------------------ load_balance_mode = on # Activate load balancing mode # (change requires restart) ignore_leading_white_space = on # Ignore leading white spaces of each query white_function_list = '' # Comma separated list of function names # that don't write to database # Regexp are accepted black_function_list = 'nextval,setval' # Comma separated list of function names # that write to database # Regexp are accepted #------------------------------------------------------------------------------ # MASTER/SLAVE MODE #------------------------------------------------------------------------------ master_slave_mode = on # Activate master/slave mode # (change requires restart) master_slave_sub_mode = 'stream' # Master/slave sub mode # Valid values are combinations slony or # stream. Default is slony. # (change requires restart) # - Streaming - #sr_check_period = 0 sr_check_period = 10 # Streaming replication check period # Disabled (0) by default sr_check_user = 'postgres' # Streaming replication check user # This is necessary even if you disable # streaming replication delay check with # sr_check_period = 0 sr_check_password = 'postgres123' # Password for streaming replication check user delay_threshold = 0 # Threshold before not dispatching query to standby node # Unit is in bytes # Disabled (0) by default # - Special commands - follow_master_command = '' # Executes this command after master failover # Special values: # %d = node id # %h = host name # %p = port number # %D = database cluster path # %m = new master node id # %H = hostname of the new master node # %M = old master node id # %P = old primary node id # %r = new master port number # %R = new master database cluster path # %% = '%' character #------------------------------------------------------------------------------ # PARALLEL MODE #------------------------------------------------------------------------------ parallel_mode = off # Activates parallel query mode # (change requires restart) pgpool2_hostname = '' # Set pgpool2 hostname # (change requires restart) # - System DB info - system_db_hostname = 'localhost' # (change requires restart) system_db_port = 5432 # (change requires restart) system_db_dbname = 'pgpool' # (change requires restart) system_db_schema = 'pgpool_catalog' # (change requires restart) system_db_user = 'pgpool' # (change requires restart) system_db_password = '' # (change requires restart) #------------------------------------------------------------------------------ # HEALTH CHECK #------------------------------------------------------------------------------ #health_check_period = 0 health_check_period = 30 # Health check period # Disabled (0) by default health_check_timeout = 20 # Health check timeout # 0 means no timeout health_check_user = 'postgres' # Health check user health_check_password = 'postgres123' # Password for health check user health_check_max_retries = 0 # Maximum number of times to retry a failed health check before giving up. health_check_retry_delay = 1 # Amount of time to wait (in seconds) between retries. #------------------------------------------------------------------------------ # FAILOVER AND FAILBACK #------------------------------------------------------------------------------ failover_command = '/home/postgres/scripts/failover_stream.sh %d %H /usr/local/pgsql/data/postgresql.trigger.5432' # Executes this command at failover # Special values: # %d = node id # %h = host name # %p = port number # %D = database cluster path # %m = new master node id # %H = hostname of the new master node # %M = old master node id # %P = old primary node id # %r = new master port number # %R = new master database cluster path # %% = '%' character failback_command = '' # Executes this command at failback. # Special values: # %d = node id # %h = host name # %p = port number # %D = database cluster path # %m = new master node id # %H = hostname of the new master node # %M = old master node id # %P = old primary node id # %r = new master port number # %R = new master database cluster path # %% = '%' character fail_over_on_backend_error = on # Initiates failover when reading/writing to the # backend communication socket fails # If set to off, pgpool will report an # error and disconnect the session. search_primary_node_timeout = 10 # Timeout in seconds to search for the # primary node when a failover occurs. # 0 means no timeout, keep searching # for a primary node forever. #------------------------------------------------------------------------------ # ONLINE RECOVERY #------------------------------------------------------------------------------ recovery_user = 'postgres' # Online recovery user recovery_password = 'postgres123' # Online recovery password recovery_1st_stage_command = '' # Executes a command in first stage recovery_2nd_stage_command = '' # Executes a command in second stage recovery_timeout = 90 # Timeout in seconds to wait for the # recovering node's postmaster to start up # 0 means no wait client_idle_limit_in_recovery = 0 # Client is disconnected after being idle # for that many seconds in the second stage # of online recovery # 0 means no disconnection # -1 means immediate disconnection #------------------------------------------------------------------------------ # WATCHDOG #------------------------------------------------------------------------------ # - Enabling - use_watchdog = off # Activates watchdog # (change requires restart) # -Connection to up stream servers - trusted_servers = '' # trusted server list which are used # to confirm network connection # (hostA,hostB,hostC,...) # (change requires restart) ping_path = '/bin' # ping command path # (change requires restart) # - Watchdog communication Settings - wd_hostname = '' # Host name or IP address of this watchdog # (change requires restart) wd_port = 9000 # port number for watchdog service # (change requires restart) wd_authkey = '' # Authentication key for watchdog communication # (change requires restart) # - Virtual IP control Setting - delegate_IP = '' # delegate IP address # If this is empty, virtual IP never bring up. # (change requires restart) ifconfig_path = '/sbin' # ifconfig command path # (change requires restart) if_up_cmd = 'ifconfig eth0:0 inet $_IP_$ netmask 255.255.255.0' # startup delegate IP command # (change requires restart) if_down_cmd = 'ifconfig eth0:0 down' # shutdown delegate IP command # (change requires restart) arping_path = '/usr/sbin' # arping command path # (change requires restart) arping_cmd = 'arping -U $_IP_$ -w 1' # arping command # (change requires restart) # - Behaivor on escalation Setting - clear_memqcache_on_escalation = on # Clear all the query cache on shared memory # when standby pgpool escalate to active pgpool # (= virtual IP holder). # This should be off if client connects to pgpool # not using virtual IP. # (change requires restart) wd_escalation_command = '' # Executes this command at escalation on new active pgpool. # (change requires restart) # - Lifecheck Setting - # -- common -- wd_lifecheck_method = 'heartbeat' # Method of watchdog lifecheck ('heartbeat' or 'query') # (change requires restart) wd_interval = 10 # lifecheck interval (sec) > 0 # (change requires restart) # -- heartbeat mode -- wd_heartbeat_port = 9694 # Port number for receiving heartbeat signal # (change requires restart) wd_heartbeat_keepalive = 2 # Interval time of sending heartbeat signal (sec) # (change requires restart) wd_heartbeat_deadtime = 30 # Deadtime interval for heartbeat signal (sec) # (change requires restart) heartbeat_destination0 = 'db2' # Host name or IP address of destination 0 # for sending heartbeat signal. # (change requires restart) heartbeat_destination_port0 = 9694 # Port number of destination 0 for sending # heartbeat signal. Usually this is the # same as wd_heartbeat_port. # (change requires restart) heartbeat_device0 = '' # Name of NIC device (such like 'eth0') # used for sending/receiving heartbeat # signal to/from destination 0. # This works only when this is not empty # and pgpool has root privilege. # (change requires restart) #heartbeat_destination1 = 'host0_ip2' #heartbeat_destination_port1 = 9694 #heartbeat_device1 = '' # -- query mode -- wd_life_point = 3 # lifecheck retry times # (change requires restart) wd_lifecheck_query = 'SELECT 1' # lifecheck query to pgpool from watchdog # (change requires restart) wd_lifecheck_dbname = 'template1' # Database name connected for lifecheck # (change requires restart) wd_lifecheck_user = 'nobody' # watchdog user monitoring pgpools in lifecheck # (change requires restart) wd_lifecheck_password = '' # Password for watchdog user in lifecheck # (change requires restart) # - Other pgpool Connection Settings - #other_pgpool_hostname0 = 'host0' # Host name or IP address to connect to for other pgpool 0 # (change requires restart) #other_pgpool_port0 = 5432 # Port number for othet pgpool 0 # (change requires restart) #other_wd_port0 = 9000 # Port number for othet watchdog 0 # (change requires restart) #other_pgpool_hostname1 = 'host1' #other_pgpool_port1 = 5432 #other_wd_port1 = 9000 #------------------------------------------------------------------------------ # OTHERS #------------------------------------------------------------------------------ relcache_expire = 0 # Life time of relation cache in seconds. # 0 means no cache expiration(the default). # The relation cache is used for cache the # query result against PostgreSQL system # catalog to obtain various information # including table structures or if it's a # temporary table or not. The cache is # maintained in a pgpool child local memory # and being kept as long as it survives. # If someone modify the table by using # ALTER TABLE or some such, the relcache is # not consistent anymore. # For this purpose, cache_expiration # controls the life time of the cache. relcache_size = 256 # Number of relation cache # entry. If you see frequently: # "pool_search_relcache: cache replacement happend" # in the pgpool log, you might want to increate this number. check_temp_table = on # If on, enable temporary table check in SELECT statements. # This initiates queries against system catalog of primary/master # thus increases load of master. # If you are absolutely sure that your system never uses temporary tables # and you want to save access to primary/master, you could turn this off. # Default is on. #------------------------------------------------------------------------------ # ON MEMORY QUERY MEMORY CACHE #------------------------------------------------------------------------------ memory_cache_enabled = off # If on, use the memory cache functionality, off by default memqcache_method = 'shmem' # Cache storage method. either 'shmem'(shared memory) or # 'memcached'. 'shmem' by default # (change requires restart) memqcache_memcached_host = 'localhost' # Memcached host name or IP address. Mandatory if # memqcache_method = 'memcached'. # Defaults to localhost. # (change requires restart) memqcache_memcached_port = 11211 # Memcached port number. Mondatory if memqcache_method = 'memcached'. # Defaults to 11211. # (change requires restart) memqcache_total_size = 67108864 # Total memory size in bytes for storing memory cache. # Mandatory if memqcache_method = 'shmem'. # Defaults to 64MB. # (change requires restart) memqcache_max_num_cache = 1000000 # Total number of cache entries. Mandatory # if memqcache_method = 'shmem'. # Each cache entry consumes 48 bytes on shared memory. # Defaults to 1,000,000(45.8MB). # (change requires restart) memqcache_expire = 0 # Memory cache entry life time specified in seconds. # 0 means infinite life time. 0 by default. # (change requires restart) memqcache_auto_cache_invalidation = on # If on, invalidation of query cache is triggered by corresponding # DDL/DML/DCL(and memqcache_expire). If off, it is only triggered # by memqcache_expire. on by default. # (change requires restart) memqcache_maxcache = 409600 # Maximum SELECT result size in bytes. # Must be smaller than memqcache_cache_block_size. Defaults to 400KB. # (change requires restart) memqcache_cache_block_size = 1048576 # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'. # Defaults to 1MB. # (change requires restart) memqcache_oiddir = '/var/log/pgpool/oiddir' # Temporary work directory to record table oids # (change requires restart) white_memqcache_table_list = '' # Comma separated list of table names to memcache # that don't write to database # Regexp are accepted black_memqcache_table_list = '' # Comma separated list of table names not to memcache # that don't write to database # Regexp are accepted
1.4 启动pgpool：pgpool -dn 以非守护进程，调试模式运行pgpool，因为如果默认是守护进程，待会想停止就麻烦了。其他参数--help.
注意观察调试信息。如果有错误，请重新查看配置文件。如果没有法相错误，使用命令：psql -p 9999 ，通过pgpool进入数据库。如果可以进入就说明pgpool监听的9999正常，且成功连接数据库。
此时使用如下命令查看监听的数据库信息：当发现status为3时，使用ping、telnet、psql -h进行测试网络连通性。关闭防火墙。
postgres=# show pool_nodes; node_id | hostname | port | status | lb_weight | role ---------+--------------+------+--------+-----------+--------- 0 | 192.168.1.45 | 5432 | 2 | 0.500000 | primary 1 | 192.168.1.50 | 5432 | 2 | 0.500000 | standby
当然，可以启动主从数据库的日志级别为 all。那么对数据的一切操作，都可以查看到。此时可以使用脚本测试一下。就可以查看主从的日志。看看是否都有日志记录。
for i in {1..100}; do echo $i; psql -p 9999 -U postgres -h 192.168.1.45 -d postgres -c "select * from test"; done
1.5 查看pgpool的状态。参考手册：http://pgpool.projects.pgfoundry.org/pgpool-II/doc/pgpool-zh_cn.html#show-commands
之前安装的regclass就是通过psql查看pgpool状态的工具。可以运行下列命令查看：
pgpool-II 通过 SHOW 命令提供一些信息。SHOW 是一个真实的 SQL 语句, 但是如果该命令查询 pgpool-II 信息的话，pgpool-II 解释了该命令。可选项如下: pool_status, 获取配置 pool_nodes, 获取节点信息 pool_processes, 获取pgPool-II 进程信息 pool_pools, 获取pgPool-II 所有的连接池信息 pool_version, 获取pgPool_II 版本信息
比如：pool_processes。查看进程池的情况。可以根据需要修改pgpool中的设置。
postgres=# show pool_processes; pool_pid | start_time | database | username | create_time | pool_counter ----------+---------------------+----------+----------+---------------------+-------------- 30093 | 2015-09-18 17:28:49 | postgres | postgres | 2015-09-18 17:35:24 | 1 30947 | 2015-09-18 17:35:31 | | | | 31078 | 2015-09-18 17:36:55 | | | | 30087 | 2015-09-18 17:28:48 | | | | 30088 | 2015-09-18 17:28:48 | | | | 30090 | 2015-09-18 17:28:49 | | | | 30089 | 2015-09-18 17:28:48 | | | | 30091 | 2015-09-18 17:28:49 | | | | 30092 | 2015-09-18 17:28:49 | | | | 30086 | 2015-09-18 17:28:48 | | | |
