- 1用免费GPU线上跑AI项目
- 2graphpad做饼图_Tableau学习系列（12）：饼图、圆环图
- 3保姆级指导给Python库创建桌面快捷方式【赶紧收藏】_python在桌面创建快捷方式
- 4《AI大模型：现状与发展，从ChatGPT到xAI的探索》_ai发展迎来 chatgpt ai大模型
- 5Android 开发之接口回调_android onprogresslistener
- 6简单区别形参与实参，传值与传地址_根据形成参数的不同，实际参数传给形式数可以分为，和地址传递两类。
- 7ThingsBoard 开源物联网平台
- 8vuex基本使用_(state) => state.channum1.num,
- 9Android databinding之数据单向与双向绑定详解与使用(三)_android databinding双向绑定
- 10extern使用方法总结_extern一个函数怎么用
复现ConvE遇到问题：spodernet安装不上
赞
踩
问题：
(py37) D:\Python\CodeHub\MTL\Siamese_MTL\ConvE>pip install -r requirements.txt
Obtaining spodernet from git+git://github.com/TimDettmers/spodernet.git#egg=spodernet (from -r requirements.txt (line 2))
Cloning git://github.com/TimDettmers/spodernet.git to d:\python\codehub\mtl\siamese_mtl\conve\src\spodernet
Running command git clone --filter=blob:none --quiet git://github.com/TimDettmers/spodernet.git ‘D:\Python\CodeHub\MTL\Siamese_MTL\ConvE\src\spodernet’
fatal: unable to connect to github.com:
github.com[0: 20.205.243.166]: errno=Unknown error
error: subprocess-exited-with-error
× git clone --filter=blob:none --quiet git://github.com/TimDettmers/spodernet.git ‘D:\Python\CodeHub\MTL\Siamese_MTL\ConvE\src\spodernet’ did not run successfully.
│ exit code: 128
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× git clone --filter=blob:none --quiet git://github.com/TimDettmers/spodernet.git ‘D:\Python\CodeHub\MTL\Siamese_MTL\ConvE\src\spodernet’ did not run successfully.
│ exit code: 128
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
解决方法：
git config --global url.https://github.com/.insteadOf git://github.com/
- 1
