oracle打补丁如何回退,Oracle 19c RAC打补丁过程避坑指南

导读：记录19.3 rac 打补丁过程中遇到的一些问题19.3升19.5、19.5升19.6。新装的19.3 rac 需要安装补丁，目前最新的RU是19.6，由于最新的可能不稳定，选择了次新的19.5，打第一套比较顺利，后面的几套都出现些大大小小的问题 ，记录一下。

19.3存在一个比较严重的crs-6015错误，是个bug，在19.6得到了修复，我打完4套19.5，又重新打了遍19.6，比较坑，强列建议直接打19.6。a)下载RU19.6补丁：p30463609_190000_Linux-x86-64.zip ,包含GI、DB、OJVM 累积增量补丁。

b)补丁安装顺序：GI–>DB-OJVM。

c)打了19.5可以直接打19.6，不需要卸载。

d)打gi和db都是在root下面操作，只有ojvm需要在oracle用户下面操作。一、补丁安装方法1. 检查环境：

由于新装的，我这里就省略掉了，可以看README.html里面的方法.

2. 解压补丁包

我下载的是gi的RU，里面包含gi和db的补丁，我是解压到/tmp下面。[root@xydb8node1 ~]# unzip p30116789_190000_Linux-x86-64.zip -d /tmp/ru19.5[root@xydb8node1 ~]# chmod -R 777 /tmp/ru19.53. 先打gi补丁【节点1打完，再打节点2】，使用opatchauto。

打gi要用gi_home的opatchauto，打oracle用oracle_home的opatchauto ,切记都是在root下面执行命令,这时用的是全路径，配置Path切换容易出错。[root@xydb8node1 ~]# /u01/app/19.3.0/grid/OPatch/opatchauto apply /tmp/ru19.5/301167894. 检查gi是否成功[grid@xydb8node1 ~]$ /u01/app/19.3.0/grid/OPatch/opatch lspatches30125133;Database Release Update : 19.5.0.0.191015 (30125133)30122167;ACFS RELEASE UPDATE 19.5.0.0.0 (30122167)30122149;OCW RELEASE UPDATE 19.5.0.0.0 (30122149)29401763;TOMCAT RELEASE UPDATE 19.0.0.0.0 (29401763)OPatch succeeded.5. 打db补丁【节点1打完，再打节点2】，使用opatchauto。[root@xydb8node1 ~]# /u01/app/oracle/product/19.3.0/db_1/OPatch/opatchauto apply /tmp/ru19.5/30116789 -oh /u01/app/oracle/product/19.3.0/db_16. 检查db是否成功[oracle@xydb8node1 ~]$ /u01/app/oracle/product/19.3.0/db_1/OPatch/opatch lspatches30125133;Database Release Update : 19.5.0.0.191015 (30125133)30122149;OCW RELEASE UPDATE 19.5.0.0.0 (30122149)OPatch succeeded.7. 打OJVM补丁【节点1打完，再打节点2】[root@xydb8node1 ~]# cd /tmp/ru19.6/30463609/30484981/[root@xydb8node1 30484981]# /u01/app/oracle/product/19.3.0/db_1/OPatch/opatch apply#按提示输入y,y即可。8. 回退方法#gi回退/u01/app/19.3.0/grid/OPatch/opatchauto rollback /tmp/grid_path/30116789 -oh /u01/app/19.3.0/grid#db回退/u01/app/oracle/product/19.3.0/db_1/OPatch/opatchauto rollback /tmp/grid_path/30116789 -oh /u01/app/oracle/product/19.3.0/db_19. 小结

先打节点1，或2都行，没有强制要求先打节点1，习惯而已。补丁安装过程中可能会遇到各种权限问题及其它问题，后面针对遇到的问题都做了下记录，让后面的人少踩坑。二、遇到的一些错误错误No.1Patch: /tmp/grid_path/30116789/30122149Log: /u01/app/oracle/product/19.3.0/db_1/cfgtoollogs/opatchauto/core/opatch/opatch2020-03-09_17-44-51PM_1.logReason: Failed during Patching: oracle.opatch.opatchsdk.OPatchException: ApplySession failed in system modification phase... 'ApplySession::apply failed: java.io.IOException: oracle.sysman.oui.patch.PatchException: java.io.FileNotFoundException: /u01/app/oraInventory/ContentsXML/oui-patch.xml (Permission denied)'After fixing the cause of failure Run opatchauto resume]OPATCHAUTO-68061: The orchestration engine failed.OPATCHAUTO-68061: The orchestration engine failed with return code 1OPATCHAUTO-68061: Check the log for more details.OPatchAuto failed.OPatchauto session completed at Mon Mar 9 17:45:31 2020Time taken to complete the session 1 minute, 16 secondsopatchauto failed with error code 42问题描述:

DB补丁安装过程中报出的权限不足，具体原因不明，没有深入去分析,19c打补丁过程中会遇到各种权限问题。

解决办法:[root@xydb8node1 ~]# chmod 777 /u01/app/oraInventory/ContentsXML/oui-patch.xml#resume是接着上次失败的地方继续安装的意思。[root@xydb8node1 ~]# /u01/app/oracle/product/19.3.0/db_1/OPatch/opatchauto resume错误No.22020-03-10 11:18:18.961 [CSSDMONITOR(150856)]CRS-8500: Oracle Clusterware CSSDMONITOR process is starting with operating system process ID 1508562020-03-10T11:18:19.092125+08:00Errors in file /u01/app/grid/diag/crs/xydb8node2/crs/trace/ohasd.trc (incident=41):CRS-6015 [] [] [] [] [] [] [] [] [] [] [] []Incident details in: /u01/app/grid/diag/crs/xydb8node2/crs/incident/incdir_41/ohasd_i41.trc2020-03-10 11:18:19.081 [OHASD(147218)]CRS-6015: Oracle Clusterware has experienced an internal error. Details at (:CLSGEN00100:) {0:0:2} in /u01/app/grid/diag/crs/xydb8node2/crs/trace/ohasd.trc.2020-03-10 11:18:19.106 [OHASD(147218)]CRS-8505: Oracle Clusterware OHASD process with operating system process ID 147218 encountered internal error CRS-06015trace日志：/u01/app/grid/diag/crs/xydb8node2/crs/trace/ohasd.trc截取部份错误日志，如下：2020-03-10 11:18:19.057 :CRSSHARED:4034262784: [ INFO] [F-ALGO]{0:0:2} getIpcPath returning (ADDRESS=(PROTOCOL=IPC)(KEY=OHASD_UI_SOCKET))2020-03-10 11:18:19.058 :GIPCXCPT:4038465280: gipcInternalConnectSync: failed sync request, addr 0x7f9c9405c720 [000000000000b814] { gipcAddress : name 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth)(GIPCID=00000000-00000000-0))', objFlags 0x0, addrFlags 0x4 }, ret gipcretConnectionRefused (29)2020-03-10 11:18:19.058 :GIPCXCPT:4038465280: gipcConnectSyncF [EvmConConnect : evmgipcio.c : 235]: EXCEPTION[ ret gipcretConnectionRefused (29) ] failed sync connect endp 0x7f9c9405b2a0 [000000000000b80d] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=)(GIPCID=00000000-00000000-0))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth)(GIPCID=00000000-00000000-0))', numPend 0, numReady 0, numDone 0, numDead 1, numTransfer 0, objFlags 0x0, pidPeer 0, readyRef (nil), ready 1, wobj 0x7f9c9405e350, sendp 0x7f9c9405e100 status 13flags 0xa108871a, flags-2 0x0, usrFlags 0x30020 }, addr 0x7f9c9405c720 [000000000000b814] { gipcAddress : name 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth)(GIPCID=00000000-00000000-0))', objFlags 0x0, addrFlags 0x4 }, flags 0x80000002020-03-10 11:18:19.058 :UiServer:4034262784: [ INFO] {0:0:2} GIPC address: clsc://(ADDRESS=(PROTOCOL=IPC)(KEY=OHASD_UI_SOCKET))2020-03-10 11:18:19.058 : GIPC:4034262784: sgipcnDSBindHelper: file /var/tmp/.oracle/sOHASD_UI_SOCKET_lock is locked by PID 1471622020-03-10 11:18:19.058 :GIPCXCPT:4034262784: gipcmodNetworkProcessBind: failed to bind endp 0x7f9c8c000950 [000000000000b819] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET)(GIPCID=00000000-00000000-0))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, readyRef 0x562c5e71a240, ready 0, wobj 0x7f9c8c03b390, sendp 0x7f9c8c03b140 status 13flags 0xa1000712, flags-2 0x0, usrFlags 0x20 }, addr 0x7f9c8c039460 [000000000000b81b] { gipcAddress : name 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET)(GIPCID=00000000-00000000-0))', objFlags 0x0, addrFlags 0x5 }2020-03-10 11:18:19.058 :GIPCXCPT:4034262784: gipcmodNetworkProcessBind: slos op : sgipcnDSBindHelper2020-03-10 11:18:19.058 :GIPCXCPT:4034262784: gipcmodNetworkProcessBind: slos dep : Resource temporarily unavailable (11)2020-03-10 11:18:19.058 :GIPCXCPT:4034262784: gipcmodNetworkProcessBind: slos loc : lockf2020-03-10 11:18:19.058 :GIPCXCPT:4034262784: gipcmodNetworkProcessBind: slos info: failed to grab a lock for (/var/tmp/.oracle/sOHASD_UI_SOCKET_lock)2020-03-10 11:18:19.058 :GIPCXCPT:4034262784: gipcListenF [initServerSocket : clsSocket.cpp : 584]: EXCEPTION[ ret gipcretAddressInUse (20) ] failed to listen on endp 0x7f9c8c000950 [000000000000b819] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET)(GIPCID=00000000-00000000-0))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, readyRef 0x562c5e71a240, ready 0, wobj 0x7f9c8c03b390, sendp 0x7f9c8c03b140 status 13flags 0xa1000712, flags-2 0x0, usrFlags 0x20 }, flags 0x02020-03-10 11:18:19.058 :UiServer:4034262784: [ ERROR] {0:0:2} SS(0x7f9c8c000eb0)GIPC Fatal Listen Error. gipc ret: gipcretAddressInUse. Address=clsc://(ADDRESS=(PROTOCOL=IPC)(KEY=OHASD_UI_SOCKET))2020-03-10 11:18:19.059 : CLSCEVT:4038465280: (:CLSCE0047:)clsce_publish_internal 0x7f9c94038da0 EvmConnCreate failed with status = 13, try = 02020-03-10 11:18:19.060 :GIPCXCPT:4038465280: gipcInternalConnectSync: failed sync request, addr 0x7f9c9405c7e0 [000000000000b834] { gipcAddress : name 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth)(GIPCID=00000000-00000000-0))', objFlags 0x0, addrFlags 0x4 }, ret gipcretConnectionRefused (29)2020-03-10 11:18:19.060 :GIPCXCPT:4038465280: gipcConnectSyncF [EvmConConnect : evmgipcio.c : 235]: EXCEPTION[ ret gipcretConnectionRefused (29) ] failed sync connect endp 0x7f9c9405b360 [000000000000b82d] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=)(GIPCID=00000000-00000000-0))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth)(GIPCID=00000000-00000000-0))', numPend 0, numReady 0, numDone 0, numDead 1, numTransfer 0, objFlags 0x0, pidPeer 0, readyRef (nil), ready 1, wobj 0x7f9c9405e330, sendp 0x7f9c9405e0e0 status 13flags 0xa108871a, flags-2 0x0, usrFlags 0x30020 }, addr 0x7f9c9405c7e0 [000000000000b834] { gipcAddress : name 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth)(GIPCID=00000000-00000000-0))', objFlags 0x0, addrFlags 0x4 }, flags 0x80000002020-03-10 11:18:19.061 : CLSCEVT:4038465280: (:CLSCE0047:)clsce_publish_internal 0x7f9c94038da0 EvmConnCreate failed with status = 13, try = 12020-03-10 11:18:19.061 : CRSEVT:4038465280: [ INFO] {0:0:2} ClusterPubSub::publish Error posting to event stream. Connection will be retried on next publish [4]2020-03-10 11:18:19.081 : CRSRPT:4038465280: [ INFO] {0:0:2} ClusterConnectException caught CRS_SERVER_STATE_CHANGE for xydb8node2Trace file /u01/app/grid/diag/crs/xydb8node2/crs/trace/ohasd.trcOracle Database 19c Clusterware Release 19.0.0.0.0 - ProductionVersion 19.6.0.0.0 Copyright 1996, 2019 Oracle. All rights reserved.DDE: Flood control is not active2020-03-10T11:18:19.092594+08:00Incident 41 created, dump file: /u01/app/grid/diag/crs/xydb8node2/crs/incident/incdir_41/ohasd_i41.trcCRS-6015 [] [] [] [] [] [] [] [] [] [] [] []2020-03-10 11:18:19.107 :GIPCXCPT:421820160: gipcInternalConnectSync: failed sync request, addr 0x7f9d10022eb0 [000000000000b867] { gipcAddress : name 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth)(GIPCID=00000000-00000000-0))', objFlags 0x0, addrFlags 0x4 }, ret gipcretConnectionRefused (29)2020-03-10 11:18:19.107 :GIPCXCPT:421820160: gipcConnectSyncF [EvmConConnect : evmgipcio.c : 235]: EXCEPTION[ ret gipcretConnectionRefused (29) ] failed sync connect endp 0x7f9d10021a30 [000000000000b860] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=)(GIPCID=00000000-00000000-0))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth)(GIPCID=00000000-00000000-0))', numPend 0, numReady 0, numDone 0, numDead 1, numTransfer 0, objFlags 0x0, pidPeer 0, readyRef (nil), ready 1, wobj 0x7f9d1005d250, sendp 0x7f9d1005d000 status 13flags 0xa108871a, flags-2 0x0, usrFlags 0x30020 }, addr 0x7f9d10022eb0 [000000000000b867] { gipcAddress : name 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth)(GIPCID=00000000-00000000-0))', objFlags 0x0, addrFlags 0x4 }, flags 0x80000002020-03-10 11:18:19.108 : CLSCEVT:421820160: (:CLSCE0047:)clsce_publish_internal 0x562c5e45bb90 EvmConnCreate failed with status = 13, try = 02020-03-10 11:18:19.108 :GIPCXCPT:421820160: gipcInternalConnectSync: failed sync request, addr 0x7f9d10022e70 [000000000000b878] { gipcAddress : name 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth)(GIPCID=00000000-00000000-0))', objFlags 0x0, addrFlags 0x4 }, ret gipcretConnectionRefused (29)2020-03-10 11:18:19.109 :GIPCXCPT:421820160: gipcConnectSyncF [EvmConConnect : evmgipcio.c : 235]: EXCEPTION[ ret gipcretConnectionRefused (29) ] failed sync connect endp 0x7f9d10021a10 [000000000000b871] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=)(GIPCID=00000000-00000000-0))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth)(GIPCID=00000000-00000000-0))', numPend 0, numReady 0, numDone 0, numDead 1, numTransfer 0, objFlags 0x0, pidPeer 0, readyRef (nil), ready 1, wobj 0x7f9d1005d230, sendp 0x7f9d1005cfe0 status 13flags 0xa108871a, flags-2 0x0, usrFlags 0x30020 }, addr 0x7f9d10022e70 [000000000000b878] { gipcAddress : name 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth)(GIPCID=00000000-00000000-0))', objFlags 0x0, addrFlags 0x4 }, flags 0x80000002020-03-10 11:18:19.110 : CLSCEVT:421820160: (:CLSCE0047:)clsce_publish_internal 0x562c5e45bb90 EvmConnCreate failed with status = 13, try = 12020-03-10 11:18:19.171 : CRSCOMM:4059477760: [ INFO] IpcL: Accepted connection 45931 from user root member number 3故障现象：集群能正常安装，安装完成后重启集群中其中一个节点可能会启不来，crs alert日志中抛出异常crs-6015 ，gipcInternalConnectSync: failed sync request 错误。解决方法：

查询mos发现是个bug，测试在19.5中未进行修复，在最新19.6的RU中已进行了修复，所以新装的19.3 RAC 建议直接升级到19.6。错误No.3[root@xydb7node1 ~]# /u01/app/19.3.0/grid/OPatch/opatchauto apply /tmp/ru19.6/30463609/30501910 -oh /u01/app/19.3.0/gridOPatchauto session is initiated at Tue Mar 10 15:37:44 2020OPATCHAUTO-72083: Performing bootstrap operations failed.OPATCHAUTO-72083: The bootstrap execution failed because failed to detect Grid Infrastructure setup due to null.OPATCHAUTO-72083: Fix the reported problem and re-run opatchauto.OPatchauto session completed at Tue Mar 10 15:38:07 2020Time taken to complete the session 0 minute, 23 secondsopatchauto bootstrapping failed with error code 255.问题分析:

这个错误在正常打补丁过程中，如果shell断开，再重新执行命令会报这个错误。

解决方法:

不能重新执行之前的命令，要用resume,如下，已经正常在跑了。[root@xydb7node1 ~]# /u01/app/19.3.0/grid/OPatch/opatchauto resumeOPatchauto session is initiated at Tue Mar 10 15:40:33 2020Session log file is /u01/app/19.3.0/grid/cfgtoollogs/opatchauto/opatchauto2020-03-10_03-40-34PM.logResuming existing session with id E7W9Start applying binary patch on home /u01/app/19.3.0/gridBinary patch applied successfully on home /u01/app/19.3.0/gridChecking shared status of home.....Starting CRS service on home /u01/app/19.3.0/grid错误No.4Failed to start CRS service on home /u01/app/19.3.0/gridExecution of [GIStartupAction] patch action failed, check log for more details. Failures:Patch Target : xydb7node1->/u01/app/19.3.0/grid Type[crs]Details: [---------------------------Patching Failed---------------------------------Command execution failed during patching in home: /u01/app/19.3.0/grid, host: xydb7node1.Command failed: /u01/app/19.3.0/grid/perl/bin/perl -I/u01/app/19.3.0/grid/perl/lib -I/u01/app/19.3.0/grid/OPatch/auto/dbtmp/bootstrap_xydb7node1/patchwork/crs/install -I/u01/app/19.3.0/grid/OPatch/auto/dbtmp/bootstrap_xydb7node1/patchwork/xag /u01/app/19.3.0/grid/OPatch/auto/dbtmp/bootstrap_xydb7node1/patchwork/crs/install/rootcrs.pl -postpatchCommand failure output:Using configuration parameter file: /u01/app/19.3.0/grid/OPatch/auto/dbtmp/bootstrap_xydb7node1/patchwork/crs/install/crsconfig_paramsThe log of current session can be found at:/u01/app/grid/crsdata/xydb7node1/crsconfig/crs_postpatch_xydb7node1_2020-03-10_03-41-09PM.log2020/03/10 15:41:20 CLSRSC-329: Replacing Clusterware entries in file 'oracle-ohasd.service'CRS-4123: Starting Oracle High Availability Services-managed resourcesCRS-41053: checking Oracle Grid Infrastructure for file permission issuesPRVG-2032 : Group of file "/etc/oracleafd.conf" did not match the expected value on node "xydb7node1". [Expected = "oinstall(1001)" ; Found = "asmadmin(1005)"]PRVH-0116 : Path "/u01/app/19.3.0/grid/crs/install/cmdllroot.sh" with permissions "rw-r--r--" does not have execute permissions for the owner, file's group, and others on node "xydb7node1".PRVG-2031 : Owner of file "/u01/app/19.3.0/grid/crs/install/cmdllroot.sh" did not match the expected value on node "xydb7node1". [Expected = "grid(1002)" ; Found = "root(0)"]PRVG-2032 : Group of file "/u01/app/19.3.0/grid/crs/install/cmdllroot.sh" did not match the expected value on node "xydb7node1". [Expected = "oinstall(1001)" ; Found = "root(0)"]PRVH-0111 : Path "/u01/app/19.3.0/grid/lib/libagtsh.so" with permissions "rwxr-x---" does not have read permissions for others on node "xydb7node1".PRVH-0113 : Path "/u01/app/19.3.0/grid/lib/libagtsh.so" with permissions "rwxr-x---" does not have execute permissions for others on node "xydb7node1".PRVH-0111 : Path "/u01/app/19.3.0/grid/lib/libagtsh.so.1.0" with permissions "rwxr-x---" does not have read permissions for others on node "xydb7node1".PRVH-0113 : Path "/u01/app/19.3.0/grid/lib/libagtsh.so.1.0" with permissions "rwxr-x---" does not have execute permissions for others on node "xydb7node1".PRVH-0111 : Path "/u01/app/19.3.0/grid/lib/clntshcore.map" with permissions "rw-r-----" does not have read permissions for others on node "xydb7node1".PRVH-0111 : Path "/u01/app/19.3.0/grid/lib/clntsh.map" with permissions "rw-r-----" does not have read permissions for others on node "xydb7node1".PRVH-0111 : Path "/u01/app/19.3.0/grid/lib/libocci.so" with permissions "rwxr-x---" does not have read permissions for others on node "xydb7node1".PRVH-0113 : Path "/u01/app/19.3.0/grid/lib/libocci.so" with permissions "rwxr-x---" does not have execute permissions for others on node "xydb7node1".PRVH-0111 : Path "/u01/app/19.3.0/grid/lib/libocci.so.19.1" with permissions "rwxr-x---" does not have read permissions for others on node "xydb7node1".PRVH-0113 : Path "/u01/app/19.3.0/grid/lib/libocci.so.19.1" with permissions "rwxr-x---" does not have execute permissions for others on node "xydb7node1".CRS-4124: Oracle High Availability Services startup failed.CRS-4000: Command Start failed, or completed with errors.2020/03/10 15:46:52 CLSRSC-117: Failed to start Oracle Clusterware stackAfter fixing the cause of failure Run opatchauto resume]OPATCHAUTO-68061: The orchestration engine failed.OPATCHAUTO-68061: The orchestration engine failed with return code 1OPATCHAUTO-68061: Check the log for more details.OPatchAuto failed.OPatchauto session completed at Tue Mar 10 15:46:54 2020Time taken to complete the session 6 minutes, 21 secondsopatchauto failed with error code 42问题分析:

这个也是文件权限的问题，按要求设置权限就行。通过lspatches直接检查gi的版本，发现已经是19.6了，估计不改应该也行，我还是按要求来改了。

解决办法:

修改这2个文件的权限，继续resume，后续很可能遇到crs-6015错误。[root@xydb7node1 ~]# chown grid:oinstall /etc/oracleafd.conf[root@xydb7node1 ~]# chown grid:oinstall /u01/app/19.3.0/grid/crs/install/cmdllroot.sh[root@xydb7node1 ~]# /u01/app/19.3.0/grid/OPatch/opatchauto resume错误No.5```shell[root@xydb7node1 ~]# /u01/app/19.3.0/grid/OPatch/opatchauto resumeOPatchauto session is initiated at Tue Mar 10 16:06:47 2020Session log file is /u01/app/19.3.0/grid/cfgtoollogs/opatchauto/opatchauto2020-03-10_04-06-47PM.logResuming existing session with id E7W9Checking shared status of home.....Starting CRS service on home /u01/app/19.3.0/grid=====>resume后这里一直卡着，检查alter日志有如下错误：2020-03-10 16:07:22.095 [OHASD(126635)]CRS-6015: Oracle Clusterware has experienced an internal error. Details at (:CLSGEN00100:) {0:0:2} in /u01/app/grid/diag/crs/xydb7node1/crs/trace/ohasd.trc.2020-03-10T16:07:22.106550+08:00Errors in file /u01/app/grid/diag/crs/xydb7node1/crs/trace/ohasd.trc (incident=9):CRS-6015 [] [] [] [] [] [] [] [] [] [] [] []Incident details in: /u01/app/grid/diag/crs/xydb7node1/crs/incident/incdir_9/ohasd_i9.trc2020-03-10 16:07:22.120 [OHASD(126635)]CRS-8505: Oracle Clusterware OHASD process with operating system process ID 126635 encountered internal error CRS-060152020-03-10 16:10:51.606 [OHASD(89349)]CRS-5828: Could not start agent '/u01/app/19.3.0/grid/bin/orarootagent_root'. Details at (:CRSAGF00130:) {0:0:2} in /u01/app/grid/diag/crs/xydb7node1/crs/trace/ohasd.trc.2020-03-10 16:10:51.638 [OHASD(89349)]CRS-5828: Could not start agent '/u01/app/19.3.0/grid/bin/oraagent_grid'. Details at (:CRSAGF00130:) {0:0:2} in /u01/app/grid/diag/crs/xydb7node1/crs/trace/ohasd.trc.2020-03-10 16:12:51.684 [OHASD(89349)]CRS-5828: Could not start agent '/u01/app/19.3.0/grid/bin/cssdagent_root'. Details at (:CRSAGF00130:) {0:0:2} in /u01/app/grid/diag/crs/xydb7node1/crs/trace/ohasd.trc.2020-03-10 16:12:51.705 [OHASD(89349)]CRS-5828: Could not start agent '/u01/app/19.3.0/grid/bin/cssdmonitor_root'. Details at (:CRSAGF00130:) {0:0:2} in /u01/app/grid/diag/crs/xydb7node1/crs/trace/ohasd.trc.问题分析:

到了这一步说明gi补丁已安装成功，在启动crs集群时卡住了，这里我为了完美打补丁，不强行ctrl+c 结束，想了个办法帮它重启crs。(这个错误是个bug，这里就不略过了)。

解决办法:

复制一个shell窗本，先停掉has,再启动has就行了，具体操作如下：[root@xydb7node1 ~]# crsctl stop has -f[root@xydb7node1 ~]# crsctl start has等待一会，gi补丁就安装成功了，如下：CRS service started successfully on home /u01/app/19.3.0/gridOPatchAuto successful.--------------------------------Summary--------------------------------Patching is completed successfully. Please find the summary as follows:Host:xydb7node1CRS Home:/u01/app/19.3.0/gridVersion:19.0.0.0.0Summary:==Following patches were SKIPPED:Patch: /tmp/ru19.6/30463609/30501910/30489227Reason: This patch is already been applied, so not going to apply again.Patch: /tmp/ru19.6/30463609/30501910/30489632Reason: This patch is already been applied, so not going to apply again.Patch: /tmp/ru19.6/30463609/30501910/30557433Reason: This patch is already been applied, so not going to apply again.Patch: /tmp/ru19.6/30463609/30501910/30655595Reason: This patch is already been applied, so not going to apply again.OPatchauto session completed at Tue Mar 10 16:26:39 2020Time taken to complete the session 19 minutes, 53 seconds总结以上就是在整个19.3 rac 补丁安装过程中遇到的一些问题汇报，希望能有所帮助，crs-6015这个bug没想到在19.6才修复，前面几个ru也没处理，对于印象中高大上的Oracle来说，实属意外，需要加倍学习。最后感谢部门各位砖家的给力支持，谢谢。

墨天轮原文链接：https://www.modb.pro/db/22393