【X806开发板试用】串口数据透传阿里云IOT

上成果

阿里云对接需要用的是PRODUCTKEY，DEVICENAME和DEVICESECRET，开始直接用MQTT的例子硬怼，没成功，后面看了文档，发现阿里云对接的client_id,username和password是通过三要素生成的。

找了一下代码，发现再device/xradio/xr806/xr_skylark/src/net/cloud/aliyun下面有阿里云的东西，遂打开看了一下，刚好有加密过程。就直接拿过来用了，不过这里出现了一点小插曲，一直引用不到里面的接口。折腾了半天不行，一怒之下，给复制出来了。

代码

创建app站内有很多文章就不再赘述，创建好以后代码结构如下：

其中，inc是把device/xradio/xr806/xr_skylark/include/net/cloud/aliyun下面的inc复制出来的；
src下面的aliyun，是直接把
device/xradio/xr806/xr_skylark/src/net/cloud/aliyun
复制出来的；

wifi，mqtt，uart的都有例子，就拿过来，改一改。大体流程是
先初始化wifi，连接wifi成功获取到网络权限以后，初始化mqtt的task，待mqtt的task连接到阿里云iot以后，初始化uart task，初始化OK以后开始轮询接收uart1数据，并透传给阿里云。

不BB了，直接上代码：
ohosdemo下的BUILD.gn

group("ohosdemo") {
    deps = [
        #"hello_demo:app_hello",
        "mqtt2uart_demo:app_uart2mqtt",
    ]
}
1
2
3
4
5
6

mqtt2uart_demo下的BUILD.gn

import("//device/xradio/xr806/liteos_m/config.gni")

static_library("app_uart2mqtt") {
   configs = []

   sources = [
      "src/main.c",
      "src/aliyun/alink_auth.c",
      "src/aliyun/alink_ca.c",
      "src/aliyun/alink_cjson_get.c",
      "src/aliyun/alink_mqtt_client.c",
      "src/aliyun/alink_utils.c",
   ]

   cflags = board_cflags

   include_dirs = board_include_dirs
   include_dirs += [
      "inc",
      "//kernel/liteos_m/kernel/arch/include",
      "//base/iot_hardware/peripheral/interfaces/kits",
      
      ".",
      "//utils/native/lite/include",
      "//foundation/communication/wifi_lite/interfaces/wifiservice",
      "//device/xradio/xr806/xr_skylark/project"
   ]
}
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29

main.c

#include <string.h>
#include "ohos_init.h"
#include "kernel/os/os.h"

#include "iot_gpio.h"
#include "wifi_device.h"
#include "common/framework/net_ctrl.h"
#include "mqtt_client.h"
#include "driver/chip/hal_uart.h"

#include "iot_uart.h"
static OS_Thread_t g_main_thread;
static OS_Thread_t g_mqtt_thread;
static OS_Thread_t g_uart_thread;


#define WIFI_DEVICE_CONNECT_AP_SSID "XXXXX"//这里填你家路由器的SSID
#define WIFI_DEVICE_CONNECT_AP_PSK "XXXXX"//这里填你家路由器的PWD

#define MQTT_CLIENT_ID "2022666"
#define MQTT_HOST_NAME "iot-as-mqtt.cn-shanghai.aliyuncs.com"
#define MQTT_PORT      "1883"
#define MQTT_PRODUCTKEY  "a1oz5VdCSZk"
#define MQTT_DEVICENAME  "DHTER000S"
#define MQTT_DEVICESECRET  "8368b89e723216bccb471434969391e5"
#define MQTT_SECUREMODE "2"

#define MQTT_RECV_TOPIC MQTT_PRODUCTKEY"/"MQTT_DEVICENAME"/user/get" //下发TOPIC
#define MQTT_UPDATE_TOPIC MQTT_PRODUCTKEY"/"MQTT_DEVICENAME"/user/update"//上报TOPIC

#define MQTT_BUF_SIZE (2*1024)

static MQTTPacket_connectData mqtt_demo_connectData = MQTTPacket_connectData_initializer;
static Client mqtt_demo_client;
static Network mqtt_demo_network;

#define UART_BUFFER_MAXSIZE 100

static int mqtt_demo_publish(char *topic, char *msg) ;

static int mqtt_demo_init(void) {
    char *send_buf;
    char *recv_buf;

    mqtt_para_init();
    aliot_device_info(MQTT_PRODUCTKEY,
					    MQTT_DEVICENAME,
					    MQTT_DEVICESECRET,
					    MQTT_CLIENT_ID,
					    MQTT_SECUREMODE);
	
    printf("str_clientID = %s\n", xr_devc_info.client_id);
	printf("str_user_name = %s\n", xr_devc_info.user_name);
	printf("sha1_pwd = %s\n", xr_devc_info.password);
	
	mqtt_demo_connectData.clientID.cstring = xr_devc_info.client_id;
    mqtt_demo_connectData.keepAliveInterval = 30; // 30s
    mqtt_demo_connectData.cleansession = 0;
    mqtt_demo_connectData.MQTTVersion = 4; //Version of MQTT 3.1.1
    
    send_buf = malloc(MQTT_BUF_SIZE);
    if (send_buf == NULL) {
        printf("no memory\n");
        return -1;
    }
    recv_buf = malloc(MQTT_BUF_SIZE);
    if (recv_buf == NULL) {
        free(send_buf);
        printf("no memory\n");
        return -1;
    }

    /* init network */
    NewNetwork(&mqtt_demo_network);
    /* init mqtt client object */
    MQTTClient(&mqtt_demo_client, &mqtt_demo_network, 6000,
               (unsigned char *)send_buf, MQTT_BUF_SIZE,
               (unsigned char *)recv_buf, MQTT_BUF_SIZE);

    /* set username and password */
    mqtt_demo_connectData.username.cstring = xr_devc_info.user_name;
    mqtt_demo_connectData.password.cstring = xr_devc_info.password;
    return 0;
}

static int mqtt_demo_connect(char *host_name, char *host_port) {
    int ret = -1;

    ret = ConnectNetwork(&mqtt_demo_network, host_name, atoi(host_port));
    if (ret != 0) {
        printf("mqtt connect faild, ret:%d, host:%s, port:%s\n", ret, host_name, host_port);
        goto exit;
    }

    ret = MQTTConnect(&mqtt_demo_client, &mqtt_demo_connectData);
    if (ret != 0) {
        printf("mqtt connect faild, ret:%d\n", ret);
        mqtt_demo_network.disconnect(&mqtt_demo_network);
        goto exit;
    }
    printf("mqtt connected\n");
exit:
    return ret;
}

static void mqtt_demo_msg_cb(MessageData *data) {
    printf("get a message, topic: %.*s, msg: %.*s\n", data->topicName->lenstring.len,
           data->topicName->lenstring.data, data->message->payloadlen,
           (char *)data->message->payload);
}

static int mqtt_demo_subscribe(char *topic) {
    int ret = -1;
    if (mqtt_demo_client.isconnected) {
        ret = MQTTSubscribe(&mqtt_demo_client, topic, 0, mqtt_demo_msg_cb);
        if (ret != 0)
            printf("mqtt subscribe faild ret:%d\n", ret);
    }
    return ret;
}

static int mqtt_demo_unsubscribe(char *topic) {
    int ret = -1;
    if (mqtt_demo_client.isconnected) {
        ret = MQTTUnsubscribe(&mqtt_demo_client, topic);
        if (ret != 0)
            printf("mqtt unsubscribe faild, ret:%d\n", ret);
    }
    return ret;
}

static int mqtt_demo_publish(char *topic, char *msg) {
    int ret = -1;

    MQTTMessage message;
    memset(&message, 0, sizeof(message));
    message.qos = 0;
    message.retained = 0; /* disable retain the message in server */
    message.payload = msg;
    message.payloadlen = strlen(msg);
    ret = MQTTPublish(&mqtt_demo_client, topic, &message);
    if (ret != 0)
        printf("mqtt publish faild, ret:%d\n", ret);
    return ret;
}

static int mqtt_demo_disconnect(void) {
    int ret = -1;

    if (mqtt_demo_client.isconnected) {
        ret = MQTTDisconnect(&mqtt_demo_client);
        if (ret != 0)
            printf("mqtt disconnect fail, ret:%d\n", ret);
        mqtt_demo_network.disconnect(&mqtt_demo_network);
    }
    return ret;
}

static void mqtt_demo_deinit(void) {
    if (mqtt_demo_client.buf) {
        free(mqtt_demo_client.buf);
        mqtt_demo_client.buf = NULL;
    }
    if (mqtt_demo_client.readbuf) {
        free(mqtt_demo_client.readbuf);
        mqtt_demo_client.readbuf = NULL;
    }
}

static void uart_task(void *arg)
{
	int ret;
	unsigned int uart_id = 1;
	unsigned int uart_len;
	unsigned char uart_rx_buffer[UART_BUFFER_MAXSIZE];
	unsigned char uart_tx_buffer[UART_BUFFER_MAXSIZE];

	static IotUartAttribute uart_param = { 115200,
						   IOT_UART_DATA_BIT_8,
						   IOT_UART_STOP_BIT_1,
						   IOT_UART_PARITY_NONE,
						   0,
						   0,
						   0 };

	printf("uart%d test start\r\n", uart_id);
	IoTUartInit(uart_id, &uart_param);
	
	IoTUartWrite(uart_id, "uart1 init OK\r\n", 15);

	while (1) {
		memset((char *)uart_rx_buffer, 0, UART_BUFFER_MAXSIZE);
		ret = IoTUartRead(uart_id, uart_rx_buffer, UART_BUFFER_MAXSIZE);
		if (ret > 0) {
			printf("recv len=%d, data:%s\r\n", ret, uart_rx_buffer);
			if(0 == mqtt_demo_publish(MQTT_UPDATE_TOPIC, uart_rx_buffer))
			{
			    memset(uart_tx_buffer, 0, UART_BUFFER_MAXSIZE);
			    uart_len = snprintf((char *)uart_tx_buffer,
								    UART_BUFFER_MAXSIZE,
								    "uart%d send data:[%s] OK\r\n", 
								    uart_id, 
								    uart_rx_buffer);
			    IoTUartWrite(uart_id, uart_tx_buffer, uart_len);
			}
			else
			{
				printf("Publish data failed!!\n");
			}
		}
		OS_MSleep(100); //100ms
	}

exit:
	IoTUartDeinit(uart_id);
	OS_ThreadDelete(&g_uart_thread);
	printf("uart%d test end\r\n", uart_id);
}

static void mqtt_task(void *arg)   {
    int ret;
    int reconnect_times = 0;

    mqtt_demo_init();

    ret = mqtt_demo_connect(MQTT_HOST_NAME, MQTT_PORT);
    if (ret != 0)
        goto exit;

    ret = mqtt_demo_subscribe(MQTT_RECV_TOPIC);
    if (ret != 0)
        goto exit;

	mqtt_demo_publish(MQTT_UPDATE_TOPIC, "mqtt init OK");
	if (!OS_ThreadIsValid(&g_uart_thread)) {
		OS_ThreadCreate(&g_uart_thread, "uart_task",
							uart_task, (void *)NULL,  OS_THREAD_PRIO_APP, (8 * 1024));
	}

    while (1) {
        ret = MQTTYield(&mqtt_demo_client, 500);
        if (ret != 0) {
            printf("mqtt yield err, ret:%d\n", ret);
reconnect:
            printf("mqtt reconnect\n");
            mqtt_demo_disconnect();
            ret = mqtt_demo_connect(MQTT_HOST_NAME, MQTT_PORT);
            if (ret != 0) {
                reconnect_times++;
                if (reconnect_times > 5)
                    goto exit;
                OS_MSleep(5000); //5s
                goto reconnect;
            }
        }
    }

exit:
    printf("mqtt disconnect\n");
    mqtt_demo_unsubscribe(MQTT_RECV_TOPIC);
    mqtt_demo_disconnect();
    mqtt_demo_deinit();
    OS_ThreadDelete(&g_mqtt_thread);
}

static void net_cb(uint32_t event, uint32_t data, void *arg) {
    uint16_t type = EVENT_SUBTYPE(event);
    switch (type) {
    case NET_CTRL_MSG_NETWORK_UP:
        printf("NET_CTRL_MSG_NETWORK_UP\n");
        if (!OS_ThreadIsValid(&g_mqtt_thread)) {
            OS_ThreadCreate(&g_mqtt_thread, "connect_to_server_task",
                                mqtt_task, (void *)NULL,  OS_THREAD_PRIO_APP, (8 * 1024));
        }
        break;
    case NET_CTRL_MSG_NETWORK_DOWN:
        break;
    default:
        break;
    }
}

static void MainThread(void *arg)   {
    printf("MainThread start\r\n");
	
    if (WIFI_SUCCESS != EnableWifi()) {
        printf("Error: EnableWifi fail\n");
        return;
    }

    OS_Sleep(1);

    if (WIFI_SUCCESS != Scan()) {
        printf("Error: Scan fail.\n");
        return;
    }

    OS_Sleep(3);//这里为了方便用延时，实际用回调更好，否则3秒可能不够

    const char ssid_want_connect[] = WIFI_DEVICE_CONNECT_AP_SSID;
    const char psk[] = WIFI_DEVICE_CONNECT_AP_PSK;
    WifiScanInfo scan_results[30];
    unsigned int scan_num = 30;

    if (WIFI_SUCCESS != GetScanInfoList(scan_results, &scan_num)) {
        printf("Error: GetScanInfoList fail.\n");
        return;
    }

    WifiDeviceConfig config = { 0 };
    int netId = 0;

    int i;
    for (i = 0; i < scan_num; i++) {
        printf("ssid: %s    ", scan_results[i].ssid);
        printf("securityType: %d\n", scan_results[i].securityType);
        if (0 == strcmp(scan_results[i].ssid, ssid_want_connect)) {
            memcpy(config.ssid, scan_results[i].ssid,
                   WIFI_MAX_SSID_LEN);
            memcpy(config.bssid, scan_results[i].bssid,
                   WIFI_MAC_LEN);
            strcpy(config.preSharedKey, psk);
            config.securityType = scan_results[i].securityType;
            config.wapiPskType = WIFI_PSK_TYPE_ASCII;
            config.freq = scan_results[i].frequency;
            break;
        }
    }

    if (i >= scan_num) {
        printf("Error: No found ssid in scan_results\n");
        return;
    }

    if (WIFI_SUCCESS != AddDeviceConfig(&config, &netId)) {
        printf("Error: AddDeviceConfig Fail\n");
        return;
    }
    printf("Config Success\n");

    if (WIFI_SUCCESS != ConnectTo(netId)) {
        printf("Error: ConnectTo Fail\n");
        return;
    }
    
    observer_base *net_ob;
    net_ob = sys_callback_observer_create(CTRL_MSG_TYPE_NETWORK, NET_CTRL_MSG_ALL, net_cb, NULL);
    if (net_ob == NULL)
        return;

    if (sys_ctrl_attach(net_ob) != 0)
        return;

    while (1) {
        OS_MSleep(500);
    }
}

void UART2MQTTMain(void) {
    if (OS_ThreadCreate(&g_main_thread, "MainThread", MainThread, NULL, OS_THREAD_PRIO_APP, 4 * 1024) != OS_OK) {
        printf("[ERR] Create MainThread Failed\n");
    }
}
SYS_RUN(UART2MQTTMain);

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365

遇到的问题

1.aliyun的lib引用不到
偷懒，直接复制出来的；
2.mqtt yield err, ret:-1
抓包发现，有时候发的keepalive包没有得到响应，怀疑是本地网络不好，后来连上家里的wifi就没问题了。
做了一个简单的修改，发包一次不响应过会再发一次。三次收不到才认为是短线，才发起reconnect。
文件：MQTTClient.c
函数：int keepalive(Client* c)

修改如下：

if (expired(&c->last_sent) || expired(&c->last_received))
    {
        if (c->ping_outstanding)
        {
        	MQTT_WARN("PINGRESP not received in keepalive interval %d.\n",c->ping_outstanding);
		if(c->ping_outstanding <= 3){
		    Timer timer;
	            InitTimer(&timer);
	            countdown_ms(&timer, 1000);
	            int len = MQTTSerialize_pingreq(c->buf, c->buf_size);
	            if (len > 0 && (rc = sendPacket(c, len, &timer)) == SUCCESS) // send the ping packet
					c->ping_outstanding++;
		    }
		    else
		    {
            	rc = FAILURE; /* PINGRESP not received in keepalive interval */
		    }
           }
		else
		{
                Timer timer;
                InitTimer(&timer);
                countdown_ms(&timer, 1000);
                int len = MQTTSerialize_pingreq(c->buf, c->buf_size);
                if (len > 0 && (rc = sendPacket(c, len, &timer)) == SUCCESS) // send the ping packet
                    c->ping_outstanding = 1;
           }
    }
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28

待优化

1. 串口透传部分目前是接过来数据就上传，没有加缓冲，数据量大时候，可能会丢数据可以加一下队列；
2. aliyun部分代码引用最好不要复制，引用原位置代码最好；