OpenHarmony-4.0-Release 源码编译记录_harmony4 源码编译

本文基于 Ubuntu 20.04.4 LTS

1、环境准备

这个没啥好说的，都是搞机的，用之前编译 aosp 的 linux 环境就行，有小伙伴担心会把之前的环境搞崩，

也有用 docker 编译的，我这里就直接在 aosp 环境下搞了，还省事。

安装下面这三东西，是为了下载 Harmony 源码

sudo apt install curl
sudo apt install python3-pip
sudo apt install git-lfs

安装下面这五个东西，是为了解决编译到最后报错(头铁不信的，你可以试试，等最后再安装)

sudo apt install default-jdk
sudo apt install mtd-utils
sudo apt install scons
sudo apt install gcc-arm-none-eabi
sudo apt install gcc-arm-linux-gnueabi

2、安装 repo

务必按照此步骤安装repo。ubuntu默认提供的repo每次启动都会访问googlge服务器，会被墙。
此外20.04下需要root身份执行–否则提示没权限。
curl https://gitee.com/oschina/repo/raw/fork_flow/repo-py3 > /usr/local/bin/repo
chmod a+x /usr/local/bin/repo
pip3 install -i https://repo.huaweicloud.com/repository/pypi/simple requests

3、下载源码

[官网版本更新说明}(https://gitee.com/openharmony/docs/tree/master/zh-cn/release-notes)

目前最新为 4.0 版本，内核基于 5.10，老版本 2.x 1.x 已经停止维护，内核基于 4.19

参考官网下载方式

repo init -u https://gitee.com/openharmony/manifest -b OpenHarmony-4.0-Release --no-repo-verify
repo sync -c
repo forall -c ‘git lfs pull’

注意那个 4.0 之前没有 v，以前的版本是有这个 v 的，不然会初始化失败，还有就是注意检查电脑是否断网了

4、下载编译依赖工具包

源码下载完成后，进入根目录执行 bash build/prebuilts_download.sh

看你网速快慢，我这大概20分钟，下载完成后会多出 openharmony_prebuilts 文件夹

5、编译源码

./build.sh --product-name rk3568 --ccache

第一次编译前面阶段 2W 多个文件，后面阶段 6W 多个文件，整体时间看你电脑性能。

编译中间要是出错看提示就行，少啥就自行安装，比如这种

default-jdk is not installed. please install it.
mtd-utils is not installed. please install it.
scons is not installed. please install it.
gcc-arm-none-eabi is not installed. please install it.
gcc-arm-linux-gnueabi is not installed. please install it.
Missing dependencies, please check!
[OHOS INFO] Set cache size limit to 100.0 GB
[OHOS INFO] generated build prop info to /hom

6、烧写固件(劝你先别烧写)

最终固件路径 out\rk3568\packages\phone\images\

里面文件和普通 rk3568 aosp 项目大差不差，所以烧写方式也是一样的。

打开 rk 烧写工具，选择加载配置，选择 images 里的 config.cfg，把对应的 image

都重新选择替换就行。想要看图的可以去参考这个OpenHarmony 入门

7、内核及驱动移植

没有任何修改编译后的固件肯定是无法在板子上跑起来的，我这里修改了很长时间也没有搞定，这里记录一下一些心得。

主要原因就是内核版本差异太大，无法平行移植，有些小伙伴直接整个 kernel 替换了就成功跑起来了。

3568 有些版本的内核用的是 4.19(我这里就是),而最新的 harmony 都是基于 5.10 了

harmony 内核源码修改路径 out\kernel\src_tmp\linux-5.10

你要是内核版本一致就可以直接替换所有文件，然后稍微修改一下如下编译规则文件

out\kernel\src_tmp\linux-5.10\make-ohos.sh

替换原有 TOYBRICK_DTB 为你自己的，比如 MY3568_DTB, 总共 4 处修改

#!/bin/bash

set -e

SCRIPTPATH=$(dirname $realpath "$0")
export PATH=$(realpath $SCRIPTPATH/../../../../)/prebuilts/clang/ohos/linux-x86_64/llvm/bin/:$(realpath $SCRIPTPATH/../../../../)/prebuilts/develop_tools/pahole/bin/:$PATH
export PRODUCT_PATH=vendor/hihope/rk3568
IMAGE_SIZE=64  # 64M
IMAGE_BLOCKS=4096
ENABLE_LTO_O0=${3}

CPUs=`sed -n "N;/processor/p" /proc/cpuinfo|wc -l`
MAKE="make LLVM=1 LLVM_IAS=1 CROSS_COMPILE=aarch64-linux-gnu-"
[ "${ENABLE_LTO_O0}" == "enable_lto_O0" ] && MAKE="${MAKE} KCFLAGS=-Wl,--lto-O0"
BUILD_PATH=boot_linux
EXTLINUX_PATH=${BUILD_PATH}/extlinux
EXTLINUX_CONF=${EXTLINUX_PATH}/extlinux.conf
# TOYBRICK_DTB=toybrick.dtb
MY3568_DTB=rk3568-evb1-ddr4-v10.dtb
if [ ${KBUILD_OUTPUT} ]; then
	OBJ_PATH=${KBUILD_OUTPUT}/
fi

ID_MODEL=1
ID_ARCH=2
ID_UART=3
ID_DTB=4
ID_IMAGE=5
ID_CONF=6
model_list=(
	"TB-RK3568X0   arm64 0xfe660000 rk3568-toybrick-x0-linux  Image rockchip_linux_defconfig"
	"TB-RK3568X10  arm64 0xfe660000 rk3568-toybrick-x10-linux Image rockchip_linux_defconfig"
	"MYBOARD3568   arm64 0xfe660000 rk3568-evb1-ddr4-v10 Image rockchip_linux_defconfig"
)


function help()
{
	echo "Usage: ./make-ohos.sh {BOARD_NAME}"
	echo "e.g."
	for i in "${model_list[@]}"; do
		echo "  ./make-ohos.sh $(echo $i | awk '{print $1}')"
	done
}


function make_extlinux_conf()
{
	dtb_path=$1
	uart=$2
	image=$3
	
	echo "label rockchip-kernel-5.10" > ${EXTLINUX_CONF}
	echo "	kernel /extlinux/${image}" >> ${EXTLINUX_CONF}
	# echo "	fdt /extlinux/${TOYBRICK_DTB}" >> ${EXTLINUX_CONF}
	echo "	fdt /extlinux/${MY3568_DTB}" >> ${EXTLINUX_CONF}
	cmdline="append earlycon=uart8250,mmio32,${uart} root=PARTUUID=614e0000-0000-4b53-8000-1d28000054a9 rw rootwait rootfstype=ext4"
	echo "  ${cmdline}" >> ${EXTLINUX_CONF}
}

function make_kernel_image()
{
	arch=$1
	conf=$2
	dtb=$3
	
	if [ "$GPUDRIVER" == "mesa3d" ]; then 
		config_base="arch/${arch}/configs/${conf}"
		config_frag="../../../../device/soc/rockchip/panfrost.config"
		ARCH=${arch} ./scripts/kconfig/merge_config.sh ${config_base} ${config_frag}
	else
		${MAKE} ARCH=${arch} ${conf}
	fi

	if [ $? -ne 0 ]; then
		echo "FAIL: ${MAKE} ARCH=${arch} ${conf}"
		return -1
	fi

	${MAKE} ARCH=${arch} ${dtb}.img -j${CPUs}
	if [ $? -ne 0 ]; then
		echo "FAIL: ${MAKE} ARCH=${arch} ${dtb}.img"
		return -2
	fi

	return 0
}

function make_ext2_image()
{
	blocks=${IMAGE_BLOCKS}
	block_size=$((${IMAGE_SIZE} * 1024 * 1024 / ${blocks}))

	if [ "`uname -m`" == "aarch64" ]; then
		echo y | sudo mke2fs -b ${block_size} -d boot_linux -i 8192 -t ext2 boot_linux.img ${blocks}
	else
		genext2fs -B ${blocks} -b ${block_size} -d boot_linux -i 8192 -U boot_linux.img
	fi

	return $?
}

function make_boot_linux()
{
	arch=${!ID_ARCH}
	uart=${!ID_UART}
	dtb=${!ID_DTB}
	image=${!ID_IMAGE}
	conf=${!ID_CONF}
	if [ ${arch} == "arm" ]; then
		dtb_path=arch/arm/boot/dts
	else
		dtb_path=arch/arm64/boot/dts/rockchip
	fi

	rm -rf ${BUILD_PATH}
	mkdir -p ${EXTLINUX_PATH}

	make_kernel_image ${arch} ${conf} ${dtb}
	if [ $? -ne 0 ]; then
		exit 1
	fi
	make_extlinux_conf ${dtb_path} ${uart} ${image}
	cp -f ${OBJ_PATH}arch/${arch}/boot/${image} ${EXTLINUX_PATH}/
	# cp -f ${OBJ_PATH}${dtb_path}/${dtb}.dtb ${EXTLINUX_PATH}/${TOYBRICK_DTB}
	cp -f ${OBJ_PATH}${dtb_path}/${dtb}.dtb ${EXTLINUX_PATH}/${MY3568_DTB}
	cp -f logo*.bmp ${BUILD_PATH}/
	if [ "enable_ramdisk" != "${ramdisk_flag}" ]; then
		make_ext2_image
	fi
}

ramdisk_flag=$2
found=0
for i in "${model_list[@]}"; do
	if [ "$(echo $i | awk '{print $1}')" == "$1" ]; then
		make_boot_linux $i
		found=1
	fi
done
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140

device\board\hihope\rk3568\kernel\build_kernel.sh

修改内核编译指定使用刚刚的 MYBOARD3568，替换原来 TB-RK3568X0

# eval $MAKE_OHOS_ENV ./make-ohos.sh TB-RK3568X0 $RAMDISK_ARG ${ENABLE_LTO_O0}
eval $MAKE_OHOS_ENV ./make-ohos.sh MYBOARD3568 $RAMDISK_ARG ${ENABLE_LTO_O0}

1
2
3

再次执行 ./build.sh --product-name rk3568 --ccache 重新编译

8、编译错误举例

错误1、内核版本差异，dts 文件属性不兼容，出现在 rk3568-dram-default-timing.dtsi 中 260 行，去修改注释即可

[OHOS ERROR] DTC arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtb
[OHOS ERROR] Error: /home/ubuntu/code/OpenHarmony4.0/out/kernel/src_tmp/linux-5.10/arch/arm64/boot/dts/rockchip/rk3568-dram-default-timing.dtsi:260.27-28 syntax error
[OHOS ERROR] FATAL ERROR: Unable to parse input tree
[OHOS ERROR] make[3]: *** [scripts/Makefile.lib:329: arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtb] Error 1
[OHOS ERROR] make[2]: *** [/home/ubuntu/code/OpenHarmony4.0/out/kernel/src_tmp/linux-5.10/Makefile:1405: rockchip/rk3568-evb1-ddr4-v10.dtb] Error 2
[OHOS ERROR] make[2]: *** Waiting for unfinished jobs…
[OHOS ERROR] make[1]: *** [arch/arm64/Makefile:208: rk3568-evb1-ddr4-v10.img] Error 2
[OHOS ERROR] make[1]: Leaving directory ‘/home/ubuntu/code/OpenHarmony4.0/out/kernel/OBJ/linux-5.10’
[OHOS ERROR] make: *** [Makefile:185: __sub-make] Error 2

错误2、修改的配置文件有问题

[OHOS ERROR] FAILED: …/kernel/src_tmp/linux-5.10/boot_linux …/kernel/checkpoint/compile_check
[OHOS ERROR] /usr/bin/env …/…/device/board/hihope/rk3568/kernel/build_kernel.sh …/…/kernel/linux/linux-5.10 /home/ubuntu/code/OpenHarmony4.0/out/rk3568/packages/phone/images /home/ubuntu/code/OpenHarmony4.0/device/board/hihope/rk3568 vendor/hihope/rk3568 /home/ubuntu/code/OpenHarmony4.0 rockchip rk3568 hihope root default disable_lto_O0

9、开机 logo 替换

device\board\hihope\rk3568\kernel\logo.bmp

device\board\hihope\rk3568\kernel\logo_kernel.bmp

10、一些常见路径

applications\standard 系统核心应用，包括日历、电话、相机、联系人、Setting、SystemUI 等

out\kernel\src_tmp\linux-5.10 最终编译内核源码路径

out\kernel\OBJ\linux-5.10 内核源码编译 obj 路径

kernel\linux\linux-5.10 SDK自带原生 kernel 路径

device\board\hihope\rk3568 编译脚本路径

openharmony kernel 代码构成如下：

①、SDK 自带原生 kernel（kernel\linux\linux-5.10\）

②、openharmony HDF驱动补丁包 hdf.patch（kernel\linux\patches\linux-5.10\rk3568_patch\）

③、方案商需求的内核补丁包 kernel.patch（kernel\linux\patches\linux-5.10\rk3568_patch\）

由1中kernel加上2、3中的patch，组合成最终的kernel代码（out\kernel\src_tmp\linux-5.10）

该工作由 device\board\hihope\rk3568\kernel\build_kernel.sh完成

脚本每次执行会时开头都会删除 out\kernel\src_tmp\linux-5.10 目录，重新组合生成。