当前位置:   article > 正文

ubuntu 编译安装php mysql_ubuntu编译安装php5 mysql nginx

ubuntu 编译安装php mysql_ubuntu编译安装php5 mysql nginx

一、首先下载软件源码包

wget http://sysoev.ru/nginx/nginx-0.8.53.tar.gz

wget http:/.s135.com/soft/linux/nginx_php/php/php-5.2.10.tar.gz

wget http:/.s135.com/soft/linux/nginx_php/phpfpm/php-5.2.10-fpm-0.5.11.diff.gz

wget http:/.s135.com/soft/linux/nginx_php/mysql/mysql-5.1.38.tar.gz

wget http:/.s135.com/soft/linux/nginx_php/libiconv/libiconv-1.13.tar.gz

wget http:/.s135.com/soft/linux/nginx_php/mcrypt/libmcrypt-2.5.8.tar.gz

wget http:/.s135.com/soft/linux/nginx_php/mcrypt/mcrypt-2.6.8.tar.gz

wget http:/.s135.com/soft/linux/nginx_php/memcache/memcache-2.2.5.tgz

wget http:/.s135.com/soft/linux/nginx_php/mhash/mhash-0.9.9.9.tar.gz

wget http:/.s135.com/soft/linux/nginx_php/pcre/pcre-7.9.tar.gz

wget http:/.s135.com/soft/linux/nginx_php/eaccelerator/eaccelerator-0.9.5.3.tar.bz2

wget http:/.s135.com/soft/linux/nginx_php/pdo/PDO_MYSQL-1.0.2.tgz

wget http:/.s135.com/soft/linux/nginx_php/imagick/ImageMagick.tar.gz

wget http:/.s135.com/soft/linux/nginx_php/imagick/imagick-2.2.2.tgz

二、安装PHP 5.2.10(FastCGI模式)

1、首先安装PHP 5.2.10所需的支持库

tar zxvf libiconv-1.13.tar.gz

cd libiconv-1.13/

./configure –prefix=/usr/local

make

make install

cd ..

tar zxvf libmcrypt-2.5.8.tar.gz

cd libmcrypt-2.5.8/

./configure

make

make install

cd ..

#在make中途出错的话, apt-get install g++ ,然后重新再做一边

ln -s /usr/local/lib/libmcrypt.la  /usr/lib/libmcrypt.la

ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so

ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4

ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8

ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a

ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la

ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so

ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2

ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1

tar zxvf mcrypt-2.6.8.tar.gz

cd mcrypt-2.6.8/

/sbin/ldconfig

./configure

make

make install

cd ..

2、编译安装MySQL 5.1.38

添加mysql用户组和用户

/usr/sbin/groupadd mysql

/usr/sbin/useradd -g mysql mysql

tar zxvf mysql-5.1.38.tar.gz

cd mysql-5.1.38/

./configure –prefix=/usr/local/webserver/mysql/ –enable-assembler

–with-extra-charsets=complex –enable-thread-safe-client –with-big-tables

–with-readline –with-ssl –with-embedded-server –enable-local-infile

–with-plugins=innobase

make && make install

chmod +w /usr/local/webserver/mysql

chown -R mysql:mysql /usr/local/webserver/mysql

cd ..

#如果编译过程中出现如下错误

#checking for tgetent in -ltermcap… no

#checking for termcap functions library… configure: error: No curses/termcap library found

#说明 curses/termcap 库没有安装去下载一个ncurses-5.6.tar.gz,

#wget http://ftp.gnu.org/pub/gnu/ncurses/ncurses-5.6.tar.gz

#tar zxvf ncurses-5.6.tar.gz

#cd ncurses-5.6

# ./configure –prefix=/usr –with-shared –without-debug

# make

# make install clean

#然后再重新编译Mysql进行安装。

#如果又遇到如下错误:

make[2]: *** [do_abi_check] 错误 1

make[2]: Leaving directory `/tmp/mysql-5.5.3-m3′

make[1]: *** [abi_check] 错误 2

make[1]: Leaving directory `/tmp/mysql-5.5.3-m3′

make: *** [all-recursive] 错误 1

#在网上搜了一下,说是Mysql的一个Bug,解决方法是打开Makefile将do_abi_check:后面的语句删除,注意do_abi_check:需要留下来,然后再 make && make install

附:以下为附加步骤,如果你想在这台服务器上运行MySQL数据库,则执行以下两步。如果你只是希望让PHP支持MySQL扩展库,能够连接其他服务器上的MySQL数据库,那么,以下两步无需执行。

1)、创建MySQL数据库存放目录

mkdir -p /var/webserver/mysql/3306/data

chown -R mysql:mysql /var/webserver/mysql/3306

2)、以mysql用户帐号的身份建立数据表:

/usr/local/webserver/mysql/bin/mysql_install_db

–basedir=/usr/local/webserver/mysql

–datadir=/var/webserver/mysql/3306/data –user=mysql

3)、创建my.cnf配置文件:

vim /var/webserver/mysql/3306/my.cnf

输入以下内容:

[client]

default-character-set = utf8

port    = 3306

socket  = /tmp/mysql.sock

[mysql]

prompt=”(u:blog.s135.com:)[d]> ”

no-auto-rehash

[mysqld]

#default-character-set = utf8

user    = mysql

port    = 3306

socket  = /tmp/mysql.sock

basedir = /usr/local/webserver/mysql

datadir = /var/webserver/mysql/3306/data

open_files_limit    = 10240

back_log = 600

max_connections = 3000

max_connect_errors = 6000

table_cache = 614

external-locking = FALSE

max_allowed_packet = 32M

sort_buffer_size = 2M

join_buffer_size = 2M

thread_cache_size = 300

thread_concurrency = 8

query_cache_size = 32M

query_cache_limit = 2M

query_cache_min_res_unit = 2k

default-storage-engine = MyISAM

default_table_type = MyISAM

thread_stack = 192K

transaction_isolation = READ-COMMITTED

tmp_table_size = 246M

max_heap_table_size = 246M

long_query_time = 1

log_long_format

log-bin = /var/webserver/mysql/3306/binlog

binlog_cache_size = 4M

binlog_format = MIXED

max_binlog_cache_size = 8M

max_binlog_size = 512M

expire_logs_days = 7

key_buffer_size = 256M

read_buffer_size = 1M

read_rnd_buffer_size = 16M

bulk_insert_buffer_size = 64M

myisam_sort_buffer_size = 128M

myisam_max_sort_file_size = 10G

myisam_max_extra_sort_file_size = 10G

myisam_repair_threads = 1

myisam_recover

skip-name-resolve

#master-connect-retry = 10

slave-skip-errors = 1032,1062,126,1114,1146,1048,1396

server-id = 1

innodb_additional_mem_pool_size = 16M

innodb_buffer_pool_size = 2048M  #如果启动不了Mysql把它改为1024或者增大swap分区的大小

innodb_data_file_path = ibdata1:1024M:autoextend

innodb_file_io_threads = 4

innodb_thread_concurrency = 8

innodb_flush_log_at_trx_commit = 2

innodb_log_buffer_size = 16M

innodb_log_file_size = 128M

innodb_log_files_in_group = 3

innodb_max_dirty_pages_pct = 90

innodb_lock_wait_timeout = 120

innodb_file_per_table = 0

[mysqldump]

quick

max_allowed_packet = 32M

4)、创建管理MySQL数据库的shell脚本:

vim /etc/init.d/mysql

输入以下内容:

#!/bin/sh

mysql_port=3306

mysql_username=”root”

mysql_password=”root”

function_start_mysql()

{

printf “Starting MySQL…n”

/bin/sh /usr/local/webserver/mysql/bin/mysqld_safe

–defaults-file=/var/webserver/mysql/${mysql_port}/my.cnf 2>&1

> /dev/null &

}

function_stop_mysql()

{

printf “Stoping MySQL…n”

/usr/local/webserver/mysql/bin/mysqladmin -u ${mysql_username} -p${mysql_password} -S /tmp/mysql.sock shutdown

}

function_restart_mysql()

{

printf “Restarting MySQL…n”

function_stop_mysql

sleep 5

function_start_mysql

}

function_kill_mysql()

{

kill -9 $(ps -ef | grep ‘bin/mysqld_safe’ | grep ${mysql_port} | awk ‘{printf $2}’)

kill -9 $(ps -ef | grep ‘libexec/mysqld’ | grep ${mysql_port} | awk ‘{printf $2}’)

}

if [ "$1" = "start" ]; then

function_start_mysql

elif [ "$1" = "stop" ]; then

function_stop_mysql

elif [ "$1" = "restart" ]; then

function_restart_mysql

elif [ "$1" = "kill" ]; then

function_kill_mysql

else

printf “Usage: /var/webserver/mysql/${mysql_port}/mysql {start|stop|restart|kill}n”

fi

5)、添加执行权限

sudo chmod +x /etc/init.d/mysql

6)、添加mysql服务(ubuntu),并启动服务添加自定义shell命令

#添加mysql服务

sudo update-rc.d mysql defaults 100

#启动mysql服务

service mysql start

#添加自写义shell命令,方便进入mysql

sudo vim ~/.bashrc

#在最后一行加入以下内容

mysql () {

/usr/local/webserver/mysql/bin/mysqlr

}

#让其立即生效

source ~/.bashrc

7)、登陆mysql以上添加好之后,直接输入mysql就可以登陆进去了

8)、输入以下SQL语句,创建一个具有root权限的用户

GRANT ALL PRIVILEGES ON *.* TO ‘root’@'localhost’ IDENTIFIED BY ”;

GRANT ALL PRIVILEGES ON *.* TO ‘root’@’127.0.0.1′ IDENTIFIED BY ”;

3、编译安装PHP(FastCGI模式)

tar zxvf php-5.2.10.tar.gz

gzip -cd php-5.2.10-fpm-0.5.11.diff.gz | patch -d php-5.2.10 -p1

cd php-5.2.10/

./configure –prefix=/usr/local/webserver/php

–with-config-file-path=/usr/local/webserver/php/etc

–with-mysql=/usr/local/webserver/mysql

–with-mysqli=/usr/local/webserver/mysql/bin/mysql_config

–with-iconv-dir=/usr/local –with-freetype-dir –with-jpeg-dir

–with-png-dir –with-zlib –with-libxml-dir=/usr –enable-xml

–disable-rpath –enable-discard-path –enable-safe-mode –enable-bcmath

–enable-shmop –enable-sysvsem –enable-inline-optimization –with-curl

–with-curlwrappers –enable-mbregex –enable-fastcgi –enable-fpm

–enable-force-cgi-redirect –enable-mbstring –with-mcrypt –with-gd

–enable-gd-native-ttf –with-openssl –with-mhash –enable-pcntl

–enable-sockets –with-ldap –with-ldap-sasl –with-xmlrpc –enable-zip

–enable-soap –without-pear

#如果出现下面的错误提示

#checking for xml2-config… no

#checking for xml-config… no

#configure: error: XML configuration could not be found

#安装  apt-get install libxml2-dev

#如果出现下面的错误提示

#checking for pkg-config… /usr/bin/pkg-config

#configure: error: Cannot find OpenSSL’s

#安装   apt-get install libssl-dev”

#如果出现下面的错误提示

#checking for cURL in default path… not found

#configure: error: Please reinstall the libcurl distribution –  easy.h should be in /include/curl/

#安装:  apt-get install libcurl4-gnutls-dev

#如果出现:

#configure: error: libjpeg.(a|so) not found.

#安装:  apt-get install libjpeg-dev

#如果出现:

#configure: error: libpng.(a|so) not found.

#安装:  apt-get install libpng12-dev

#如果出现:configure: error: freetype.h not found.

#安装:  apt-get install libfreetype6-dev

#如果出现:configure: error: sasl.h not found!

#安装:  apt-get install libsasl2-dev

如果出现:

+——————————————————————–+

|                       *** ATTENTION ***                            |

|                                                                    |

| Something is likely to be messed up here, because the configure    |

| script was not able to detect a simple feature on your platform.   |

| This is often caused by incorrect configuration parameters. Please |

| see the file debug.log for error messages.                         |

|                                                                    |

| If you are unable to fix this, send the file debug.log to the      |

| php-install@lists.php.net mailing list and include appropiate      |

| information about your setup.                                      |

+——————————————————————–+

| License:                                                           |

| This software is subject to the PHP License, available in this     |

| distribution in the file LICENSE.  By continuing this installation |

| process, you are bound by the terms of this license agreement.     |

| If you do not agree with the terms of this license, you must abort |

| the installation process at this point.                            |

+——————————————————————–+

Thank you for using PHP.

#到php安装程序目录(编译PHP的目录)去查看debug.log最后几行如果有以下警告

A   conftest.c:3: warning: incompatible implicit declaration of built-in function ‘exit’

B   ./conftest: error while loading shared libraries:

libmysqlclient.so.16: cannot open shared object file: No such file or

directory

#增加LD_LIBRARY_PATH=/usr/local/mysql/lib/mysql到环境变量,方法为编辑/etc/profile文

件,添 加:export LD_LIBRARY_PATH=/usr/local/webserver/mysql/lib/mysql

#如果不想重启使用 . /etc/profile 就可以了,注意.和/etc中间有空格,然后再重新编译

make ZEND_EXTRA_LIBS=’-liconv’

make install

#复制配置好的php.ini到/usr/local/webserver/php/etc/目录下

cp php.ini-dist /usr/local/webserver/php/etc/php.ini

cd ..

#curl http://pear.php.net/go-pear | /usr/local/webserver/php/bin/php

4、编译安装PHP5扩展模块

tar zxvf memcache-2.2.5.tgz

cd memcache-2.2.5/

/usr/local/webserver/php/bin/phpize

./configure –with-php-config=/usr/local/webserver/php/bin/php-config

make

make install

cd ..

#如果出现:

#Cannot find autoconf. Please check your autoconf installation and the

#$PHP_AUTOCONF environment variable. Then, rerun this script.

#安装:

#sudo apt-get install m4

#sudo apt-get install autoconf

#或者直接:

#sudo apt-get install autoconf

#因为autoconf 依赖于m4,所以会自动下载解决这个依赖关系.

tar jxvf eaccelerator-0.9.5.3.tar.bz2

cd eaccelerator-0.9.5.3/

/usr/local/webserver/php/bin/phpize

./configure –enable-eaccelerator=shared –with-php-config=/usr/local/webserver/php/bin/php-config

make

make install

cd ..

tar zxvf PDO_MYSQL-1.0.2.tgz

cd PDO_MYSQL-1.0.2/

/usr/local/webserver/php/bin/phpize

./configure –with-php-config=/usr/local/webserver/php/bin/php-config –with-pdo-mysql=/usr/local/webserver/mysql

make

make install

cd ..

tar zxvf ImageMagick.tar.gz

cd ImageMagick-6.5.1-2/

./configure

make

make install

cd ..

#如果执行make时出错,信息提示如下:

#/usr/bin/ld: cannot find -lperl

#collect2: ld returned 1 exit status

#make[2]: *** [blib/arch/auto/Image/Magick/Magick.so] 错误 1

#make[2]:正在离开目录 `/home/ouyangjunqiu/下载/ImageMagick-6.5.1-2/PerlMagick’

#make[1]: *** [all-perl] 错误 2

#make[1]:正在离开目录 `/home/ouyangjunqiu/下载/ImageMagick-6.5.1-2′

#make: *** [all] 错误 2

#有两种解决方法

#1.在配置的时候加个。。

#./configure –without-perl

#2.安装库文件

#apt-get install libperl-dev

#安装完成后验证一下是否能正常工作输入convert -version 如果出现如下错误:

convert: error while loading shared libraries: libMagickCore.so.2: cannot open shared object file: No such file or directory

#我们需要把安装目录下缺失的文件,用ln链接到/usr/lib目录下

#ln -s /usr/local/lib/libMagickCore.so.2 /usr/lib

#然后可以使用convert  xx.jpg  xx.gif 把jpg的图片转换为gif看看能不能正常使用

tar zxvf imagick-2.2.2.tgz

cd imagick-2.2.2/

/usr/local/webserver/php/bin/phpize

./configure –with-php-config=/usr/local/webserver/php/bin/php-config

make

make install

cd ..

5、修改php.ini文件

手工修改:查找/usr/local/webserver/php/etc/php.ini中的extension_dir = “./”

修改为extension_dir = “/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/”

并在此行后增加以下几行,然后保存:

extension = “memcache.so”

extension = “pdo_mysql.so”

extension = “imagick.so”

再查找output_buffering = Off

修改为output_buffering = On

6、配置eAccelerator加速PHP:

mkdir -p /usr/local/webserver/eaccelerator_cache

vi /usr/local/webserver/php/etc/php.ini

按shift+g键跳到配置文件的最末尾,加上以下配置信息:

[eaccelerator]

zend_extension=”/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so”

eaccelerator.shm_size=”64″

eaccelerator.cache_dir=”/usr/local/webserver/eaccelerator_cache”

eaccelerator.enable=”1″

eaccelerator.optimizer=”1″

eaccelerator.check_mtime=”1″

eaccelerator.debug=”0″

eaccelerator.filter=”"

eaccelerator.shm_max=”0″

eaccelerator.shm_ttl=”3600″

eaccelerator.shm_prune_period=”3600″

eaccelerator.shm_only=”0″

eaccelerator.compress=”1″

eaccelerator.compress_level=”9″

7、创建www用户和组:

/usr/sbin/groupadd www

/usr/sbin/useradd -g www www

mkdir -p /var/webserver/www

chmod +w /var/webserver/www

chown -R www:www /var/webserver/www

8、创建php-fpm配置文件(php-fpm是为PHP打的一个FastCGI管理补丁,可以平滑变更php.ini配置而无需重启php-cgi):

在/usr/local/webserver/php/etc/目录中创建php-fpm.conf文件:

rm -rf /usr/local/webserver/php/etc/php-fpm.conf

vi /usr/local/webserver/php/etc/php-fpm.conf

输入以下内容(如果您安装 Nginx + PHP 用于程序调试,请将以下的

name=”display_errors”>0

改为

name=”display_errors”>1

,以便显示PHP错误信息,否则,Nginx

会报状态为500的空白错误页):

All relative paths in this config are relative to php’s install prefix

Pid file

/usr/local/webserver/php/logs/php-fpm.pid

Error log file

/usr/local/webserver/php/logs/php-fpm.log

Log level

notice

When this amount of php processes exited with SIGSEGV or SIGBUS …

10

… in a less than this interval of time, a graceful restart will be initiated.

Useful to work around accidental curruptions in accelerator’s shared memory.

1m

Time limit on waiting child’s reaction on signals from master

5s

Set to ‘no’ to debug fpm

yes

Name of pool. Used in logs and stats.

default

Address to accept fastcgi requests on.

Valid syntax is ‘ip.ad.re.ss:port’ or just ‘port’ or ‘/path/to/unix/socket’

127.0.0.1:9000

Set listen(2) backlog

-1

Set permissions for unix socket, if one used.

In Linux read/write permissions must be set in order to allow connections from web server.

Many BSD-derrived systems allow connections regardless of permissions.

0666

Additional php.ini defines, specific to this pool of workers.

/usr/sbin/sendmail -t -i

1

Unix user of processes

www

Unix group of processes

www

Process manager settings

Sets style of controling worker process count.

Valid values are ‘static’ and ‘apache-like’

static

Sets the limit on the number of simultaneous requests that will be served.

Equivalent to Apache MaxClients directive.

Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi

Used with any pm_style.

128

Settings group for ‘apache-like’ pm style

Sets the number of server processes created on startup.

Used only when ‘apache-like’ pm_style is selected

20

Sets the desired minimum number of idle server processes.

Used only when ‘apache-like’ pm_style is selected

5

Sets the desired maximum number of idle server processes.

Used only when ‘apache-like’ pm_style is selected

35

The timeout (in seconds) for serving a single request after which the worker process will be terminated

Should be used when ‘max_execution_time’ ini option does not stop script execution for some reason

’0s’ means ‘off’

0s

The timeout (in seconds) for serving of single request after which a php backtrace will be dumped to slow.log file

’0s’ means ‘off’

0s

The log file for slow requests

logs/slow.log

Set open file desc rlimit

65535

Set max core size rlimit

0

Chroot to this directory at the start, absolute path

Chdir to this directory at the start, absolute path

Redirect workers’ stdout and stderr into main error log.

If not set, they will be redirected to /dev/null, according to FastCGI specs

yes

How much requests each process should execute before respawn.

Useful to work around memory leaks in 3rd party libraries.

For endless request processing please specify 0

Equivalent to PHP_FCGI_MAX_REQUESTS

102400

Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.

Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)

Makes sense only with AF_INET listening socket.

127.0.0.1

Pass environment variables like LD_LIBRARY_PATH

All $VARIABLEs are taken from current environment

$HOSTNAME

/usr/local/bin:/usr/bin:/bin

/tmp

/tmp

/tmp

$OSTYPE

$MACHTYPE

2

9、启动php-cgi进程,监听127.0.0.1的9000端口,进程数为200(如果服务器内存小于3GB,可以只开启64个进程)

ulimit -SHn 65535

/usr/local/webserver/php/sbin/php-fpm start

注:/usr/local/webserver/php/sbin/php-fpm还有其他参数,包

括:start|stop|quit|restart|reload|logrotate,修改php.ini后不重启php-cgi,重新加载配置文件

使用reload。

三、安装Nginx 0.8.53

1、安装Nginx所需的pcre库:

tar zxvf pcre-7.9.tar.gz

cd pcre-7.9/

./configure

make && make install

cd ..

2、安装Nginx

tar zxvf nginx-0.8.53.tar.gz

cd nginx-0.8.53/

./configure –user=www –group=www –prefix=/usr/local/webserver/nginx –with-http_stub_status_module –with-http_ssl_module

make && make install

cd ..

3、创建Nginx日志目录

mkdir -p /var/log/nginx

chmod +w /var/log/nginx

chown -R www:www /var/log/nginx

4、创建Nginx配置文件

1、在/usr/local/webserver/nginx/conf/目录中创建nginx.conf文件:

rm -f /usr/local/webserver/nginx/conf/nginx.conf

vi /usr/local/webserver/nginx/conf/nginx.conf

输入以下内容:

user  www www;

worker_processes 2;

error_log  /var/log/nginx/nginx_error.log;

pid        /var/run/nginx.pid;

events {

worker_connections  1024;

}

http {

include       /usr/local/webserver/nginx/conf/mime.types;

default_type  application/octet-stream;

log_format  main  ’$remote_addr – $remote_user [$time_local] “$request “‘

‘$status $body_bytes_sent “$http_referer” ‘

‘”$http_user_agent” “$http_x_forwarded_for”‘;

access_log  /var/log/nginx/access.log  main;

sendfile        on;

autoindex off;

map $scheme $fastcgi_https { ## Detect when HTTPS is used

default off;

https on;

}

keepalive_timeout  10;

fastcgi_connect_timeout 300;

fastcgi_send_timeout 300;

fastcgi_read_timeout 300;

fastcgi_buffers 8 128k;

gzip  on;

gzip_comp_level 2;

gzip_proxied any;

#gzip_types   text/plain text/html text/css application/x-javascript

text/xml application/xml application/xml+rss text/javascript;

# Load config files from the /usr/local/webserver/nginx/conf/conf.d directory

include  /usr/local/webserver/nginx/conf/conf.d/*.conf;

}

添加虚似主机(注:因本人要使用Magento所以下面有的东西是给Magento写的,这只是个例子)

vim /usr/local/webserver/nginx/conf/conf.d/zozhang.test.conf

写下配置文件

server {

listen 80;

server_name zozhang.test;

#下面这包主要是给没有加www的添加www,由于是本地测试,就不启用了。

#rewrite / $scheme://www.$host$request_uri permanent; ## Forcibly prepend a www

}

server {

listen 80 default; #default 所的配置文件中,只能定义一个;

server_name zozhang.test; ## Domain is here twice so server_name_in_redirect will favour the www

root /var/webserver/www/test;

location / {

index index.html index.php; ## Allow a static html file to be shown first

try_files $uri $uri/ @handler; ## If missing pass the URI to Magento’s front handler

expires 30d; ## Assume all files are cachable

}

location /minify/ { ## Needed for Fooman Speedster

rewrite ^/minify/([0-9]+)(/.*.(js|css))$ /lib/minify/m.php?f=$2&d=$1 last;

}

## These locations would be hidden by .htaccess normally

location /app/                { deny all; }

location /includes/           { deny all; }

location /lib/                { deny all; }

location /lib/minify/         { allow all; }  ## Deny is applied after rewrites so must specifically allow minify

location /media/downloadable/ { deny all; }

location /pkginfo/            { deny all; }

location /report/config.xml   { deny all; }

location /var/                { deny all; }

location /var/export/ { ## Allow admins only to view export folder

auth_basic           “Restricted”; ## Message shown in login window

auth_basic_user_file htpasswd; ## See /usr/local/webserver/nginx/confhtpassword

autoindex            on;

}

location  /. { ## Disable .htaccess and other hidden files

return 404;

}

location @handler { ## Magento uses a common front handler

rewrite / /index.php;

}

location ~ .php/ { ## Forward paths like /js/index.php/x.js to relevant handler

rewrite ^(.*.php)/ $1 last;

}

location ~ .php$ { ## Execute PHP scripts

expires        off; ## Do not cache dynamic content

fastcgi_pass   127.0.0.1:9000;

fastcgi_param  HTTPS $fastcgi_https;

fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;

include        fastcgi_params; ## See /usr/local/webserver/nginx/conf/fastcgi_params

}

}

2、在/usr/local/webserver/nginx/conf/目录中创建fcgi.conf文件:

vi /usr/local/webserver/nginx/conf/fcgi.conf

输入以下内容:

fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;

fastcgi_param  SERVER_SOFTWARE    nginx;

fastcgi_param  QUERY_STRING       $query_string;

fastcgi_param  REQUEST_METHOD     $request_method;

fastcgi_param  CONTENT_TYPE       $content_type;

fastcgi_param  CONTENT_LENGTH     $content_length;

fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;

fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;

fastcgi_param  REQUEST_URI        $request_uri;

fastcgi_param  DOCUMENT_URI       $document_uri;

fastcgi_param  DOCUMENT_ROOT      $document_root;

fastcgi_param  SERVER_PROTOCOL    $server_protocol;

fastcgi_param  REMOTE_ADDR        $remote_addr;

fastcgi_param  REMOTE_PORT        $remote_port;

fastcgi_param  SERVER_ADDR        $server_addr;

fastcgi_param  SERVER_PORT        $server_port;

fastcgi_param  SERVER_NAME        $server_name;

# PHP only, required if PHP was built with –enable-force-cgi-redirect

fastcgi_param  REDIRECT_STATUS    200;

5、启动Nginx

ulimit -SHn 65535

/usr/local/webserver/nginx/sbin/nginx

#启动过程中如果提示:/usr/local/webserver/nginx/sbin/nginx: error while loading

shared libraries: libpcre.so.0: cannot open shared object file: No such

file or directory

#解决方法,在/lib中创建一个symbol link到/usr/local/lib/libpcre.so.0

# ln -s  /usr/local/lib/libpcre.so.0  /lib

四、配置开机自动启动Nginx + PHP

vi /etc/rc.local

在末尾增加以下内容:

ulimit -SHn 65535

/usr/local/webserver/php/sbin/php-fpm start

/usr/local/webserver/nginx/sbin/nginx

创建Nginx管理脚本(启动、停止、配置、重启)

################################################

#!/bin/bash

# v.0.0.3

# create by jackbillow at 2007.10.15

# redevelop by XGuru at 2010.6.28

# On Ubuntu 10.04

# nginx – This shell script takes care of starting and stopping nginx.

#

# description: nginx [engine x] is light http web/proxy server

# that answers incoming ftp service requests.

###############################################

nginx_path=”/usr/local/webserver/nginx/”  #配置nginx安装路径

nginx_pid=”/usr/local/webserver/nginx/logs/nginx.pid”

prog=”nginx”

RETVAL=0

start() {

# Start daemons.

if [ -e $nginx_path/conf/nginx.conf ];then

echo -n $”Starting $prog: ”

$nginx_path/sbin/nginx -c $nginx_path/conf/nginx.conf &

RETVAL=$?

[ $RETVAL -eq 0 ] && {

echo Start “$prog” successfully!

}

else

RETVAL=1

fi

return $RETVAL

}

# Stop daemons.

stop() {

echo -n $”Stopping $progn”

sudo killall -9 nginx

RETVAL=$?

}

# See how we were called.

conf(){

vim “$nginx_path/conf/nginx.conf”   #这里请设置要使用什么方式打开配置文件,我使用的是vim

}

case “$1″ in

start)

start

;;

stop)

stop

;;

conf)

conf

;;

restart)

stop

start

;;

*)

echo $”Usage: $0 {start|stop|conf|restart}”

echo $”Your may need root privilege to execute this script!”

exit 1

esac

exit $RETVAL

六、在不停止Nginx服务的情况下平滑变更Nginx配置

1、修改/usr/local/webserver/nginx/conf/nginx.conf配置文件后,请执行以下命令检查配置文件是否正确:

/usr/local/webserver/nginx/sbin/nginx -t

如果屏幕显示以下两行信息,说明配置文件正确:

the configuration file /usr/local/webserver/nginx/conf/nginx.conf syntax is ok

the configuration file /usr/local/webserver/nginx/conf/nginx.conf was tested successfully

2、这时,输入以下命令查看Nginx主进程号:

ps -ef | grep “nginx: master process” | grep -v “grep” | awk -F ‘ ‘ ‘{print $2}’

屏幕显示的即为Nginx主进程号,例如:

6302

这时,执行以下命令即可使修改过的Nginx配置文件生效:

kill -HUP 6302

或者无需这么麻烦,找到Nginx的Pid文件:

kill -HUP `cat /usr/local/webserver/nginx/nginx.pid`

七、编写每天定时切割Nginx日志的脚本

1、创建脚本/usr/local/webserver/nginx/sbin/cut_nginx_log.sh

vi /usr/local/webserver/nginx/sbin/cut_nginx_log.sh

输入以下内容:

#!/bin/bash

# This script run at 00:00

# The Nginx logs path

logs_path=”/usr/local/webserver/nginx/logs/”

mkdir -p ${logs_path}$(date -d “yesterday” +”%Y”)/$(date -d “yesterday” +”%m”)/

mv ${logs_path}access.log ${logs_path}$(date -d “yesterday”

+”%Y”)/$(date -d “yesterday” +”%m”)/access_$(date -d “yesterday”

+”%Y%m%d”).log

kill -USR1 `cat /usr/local/webserver/nginx/nginx.pid`

2、设置crontab,每天凌晨00:00切割nginx访问日志

crontab -e

输入以下内容:

00 00 * * * /bin/bash  /usr/local/webserver/nginx/sbin/cut_nginx_log.sh

声明:本文内容由网友自发贡献,不代表【wpsshop博客】立场,版权归原作者所有,本站不承担相应法律责任。如您发现有侵权的内容,请联系我们。转载请注明出处:https://www.wpsshop.cn/w/羊村懒王/article/detail/186157
推荐阅读
相关标签
  

闽ICP备14008679号