赞
踩
ap-group 123
sta-limit 15
wlansec 1
security rsn enable
security rsn ciphers aes enable
secyrity rsn akm psk enable
secyrity rsn akm psk set-key ascii 12345678
5.8G频段的Coverage-area-control功率调整为17db。2.4G频段的Coverage-area-control功率调整为10db
ap-group Admin_CCZH
coverage-area-control 10 radio 1
coverage-area-control 17 radio 2
关闭低速率(11b/g 1M、2M、5M,11a 6M、9M)应用接入
#ac-controller
#802.11a network rate 6 disabled
#802.11a network rate 9 disabled
#802.11b network rate 1 disabled
#802.11b network rate 2 disabled
#802.11b network rate 5 disabled
#802.11g network rate 5 disabled
#802.11g network rate 2 disabled
#802.11g network rate 1 disabled
调整2.4G频段射频卡powerlocal功率数值为20
调整5.8G频段射频卡powerlocal功率数值为100
power local 20 radio 1
power local 100 radio 2
调整5.8G频段的射频卡无线频率带宽至40MHz。
chan-width 40 radio 2
了优化网络传输,配置吉林分部无线网中的每台无线终端设备的下行平均速率为 800KB/s ,突发速率为1600KB/s。
wlan-config 2
wlan-based per-user-limit down-streams average-data-rate 800 burst-data-rate 1600
设置广州分部无线网中用户的最小接入信号强度为-65dBm。
Ap-config AP1
response-rssi 30 radio 1
response-rssi 30 radio 2
Copyright © 2003-2013 www.wpsshop.cn 版权所有,并保留所有权利。