当前位置:   article > 正文

k8s 故障_warning: kubeadm cannot validate component configs

warning: kubeadm cannot validate component configs for api groups [kubelet.c

一 、执行初始化时出现一下报错

[root@master ~]# kubeadm init --apiserver-advertise-address=0.0.0.0 --image-repository registry.aliyuncs.com/google_containers --kubernetes-version v1.18.0 --service-cidr=10.96.0.0/12

W0430 17:41:57.941882   91467 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io]

[init] Using Kubernetes version: v1.18.0

[preflight] Running pre-flight checks

    [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/

error execution phase preflight: [preflight] Some fatal errors occurred:

    [ERROR FileContent--proc-sys-net-ipv4-ip_forward]: /proc/sys/net/ipv4/ip_forward contents are not set to 1

[preflight] If you know what you are doing, you can make a check non-fatal with `--ignore-preflight-errors=...`

To see the stack trace of this error execute with --v=5 or higher

[root@master ~]# cat   /proc/sys/net/ipv4/ip_forward   ##检查路由转发是否等于“1"

0

[root@master ~]# echo "1" > /proc/sys/net/ipv4/ip_forward      ##如不是侧修改配置文件。

[root@master ~]# cat   /proc/sys/net/ipv4/ip_forward

1

二、node 节点对接master时显示以下报错

侧可能上一次node节点数据没有清楚,需执行”kubeadm reset“后重新对接。

本文内容由网友自发贡献,转载请注明出处:【wpsshop博客】
推荐阅读
相关标签
  

闽ICP备14008679号