em3288 linux_4.19 第一次烧写无法进入内核的情况_rk3288-linux-core.dtsi

1. 情况一：
/DDR Version 1.11 20210818
In
SRX
Channel a: DDR3 400MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 400MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
OUT
Boot1 Release Time: Jul 22 2021 09:08:57, version: 2.63
ChipType = 0x8, 240
mmc2:cmd19,100
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=7456MB
FwPartOffset=2000 , 2000
mmc0:cmd8,400
mmc0:cmd8,400
mmc0:cmd8,400
SdmmcInit=0 1
StorageInit ok = 23468
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:             boot, start:0xa000, size:0x10000
GPT part:  4, name:         recovery, start:0x1a000, size:0x10000
GPT part:  5, name:           backup, start:0x2a000, size:0x10000
GPT part:  6, name:              oem, start:0x3a000, size:0x20000
GPT part:  7, name:           rootfs, start:0x5a000, size:0xc00000
GPT part:  8, name:         userdata, start:0xc5a000, size:0x235fc0
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
LOADER Check OK! 0x4000, 147767
TOS    Check OK! 0x6000, 184329
Enter Trust OS
INF [0x0] TEE-CORE:init_primary_helper:385: Core0 Initializing (1.1.0-443-g1089bf090 #chenjh #1 Fri Oct 21 01:50:51 UTC 2022 arm)

INF [0x0] TEE-CORE:init_primary_helper:386: Release version: 1.3

INF [0x0] TEE-CORE:init_primary_helper:387: Next entry point address: 0x200000

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done


U-Boot 2017.09 #liuyuan (Jul 31 2023 - 20:09:39 +0800)

Model: Evb-RK3288
PreSerial: 2, raw, 0xff690000
DRAM:  2 GiB
Sysmem: init
Relocation Offset: 00000000
Relocation fdt: 7bcca948 - 7bccbddd
CR: M/C/I
Using default environment

DM: v1
dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
Bootdev(atags): mmc 0
MMC0: High Speed, 52Mhz
PartType: EFI
boot mode: recovery (misc)
Found DTB in recovery part
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 400000Hz
VDD_LOG 1100000 uV
io-domain: OK
CLK: (uboot. arm: enter 1000000 KHz, init 1000000 KHz, kernel 0N/A)
  apll 1000000 KHz
  dpll 396000 KHz
  cpll 24000 KHz
  gpll 594000 KHz
  npll 24000 KHz
  aclk_bus 198000 KHz
Net:   Net Initialization Skipped
No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "recovery"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
Booting ZIMAGE kernel at 0x02008000(Uncompress to 0) with fdt at 0x08300000...


Fdt Ramdisk skip relocation
## Booting Android Image at 0x02007800 ...
Kernel: 0x02008000 - 0x027c3100 (7917 KiB)
ramdisk:    0x0a200000 - 0x0aa84151 (8721 KiB)
## Flattened Device Tree blob at 0x08300000
   Booting using the fdt blob at 0x08300000
   XIP Kernel Image from 0x02008000 to 0x02008000 ... OK
   kernel loaded at 0x02008000, end = 0x027c3100
  'reserved-memory' dma-unusable@fe000000: addr=fe000000 size=1000000
   Using Device Tree in place at 08300000, end 083155d4
can't found rockchip,drm-logo, use rockchip,fb-logo
WARNING: could not set reg FDT_ERR_BADOFFSET.
failed to reserve fb-loader-logo memory
Adding bank: 0x00000000 - 0x08400000 (size: 0x08400000)
Adding bank: 0x09310000 - 0x80000000 (size: 0x76cf0000)
Total: 711.850 ms

Starting kernel ...

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114

解决一：
\rk3288_linux4.19\kernel\arch\arm\boot\dts\rk3288-evb-act8846.dts
#include "rk3288-evb.dtsi"
++++#include "rk3288-linux.dtsi"
1
2
3
4

2. 情况二：
|DDR Version 1.11 20210818
In
SRX
Channel a: DDR3 400MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 400MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
OUT
Boot1 Release Time: Jul 22 2021 09:08:57, version: 2.63
ChipType = 0x8, 234
mmc2:cmd19,100
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=7456MB
FwPartOffset=2000 , 2000
mmc0:cmd8,400
mmc0:cmd8,400
mmc0:cmd8,400
SdmmcInit=0 1
StorageInit ok = 23467
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:             boot, start:0xa000, size:0x10000
GPT part:  4, name:         recovery, start:0x1a000, size:0x10000
GPT part:  5, name:           backup, start:0x2a000, size:0x10000
GPT part:  6, name:              oem, start:0x3a000, size:0x20000
GPT part:  7, name:           rootfs, start:0x5a000, size:0xc00000
GPT part:  8, name:         userdata, start:0xc5a000, size:0x235fc0
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
LOADER Check OK! 0x4000, 147759
TOS    Check OK! 0x6000, 184307
Enter Trust OS
INF [0x0] TEE-CORE:init_primary_helper:385: Core0 Initializing (1.1.0-443-g1089bf090 #chenjh #1 Fri Oct 21 01:50:51 UTC 2022 arm)

INF [0x0] TEE-CORE:init_primary_helper:386: Release version: 1.3

INF [0x0] TEE-CORE:init_primary_helper:387: Next entry point address: 0x200000

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done


U-Boot 2017.09 #liuyuan (Jul 31 2023 - 20:09:39 +0800)

Model: Evb-RK3288
PreSerial: 2, raw, 0xff690000
DRAM:  2 GiB
Sysmem: init
Relocation Offset: 00000000
Relocation fdt: 7bcca948 - 7bccbddd
CR: M/C/I
Using default environment

DM: v1
dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
Bootdev(atags): mmc 0
MMC0: High Speed, 52Mhz
PartType: EFI
boot mode: recovery (misc)
Found DTB in recovery part
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 400000Hz
VDD_LOG 1100000 uV
io-domain: OK
CLK: (uboot. arm: enter 1000000 KHz, init 1000000 KHz, kernel 0N/A)
  apll 1000000 KHz
  dpll 396000 KHz
  cpll 24000 KHz
  gpll 594000 KHz
  npll 24000 KHz
  aclk_bus 198000 KHz
Net:   Net Initialization Skipped
No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "recovery"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
Booting ZIMAGE kernel at 0x02008000(Uncompress to 0) with fdt at 0x08300000...


Fdt Ramdisk skip relocation
## Booting Android Image at 0x02007800 ...
Kernel: 0x02008000 - 0x027c3100 (7917 KiB)
ramdisk:    0x0a200000 - 0x0aa83b11 (8719 KiB)
## Flattened Device Tree blob at 0x08300000
   Booting using the fdt blob at 0x08300000
   XIP Kernel Image from 0x02008000 to 0x02008000 ... OK
   kernel loaded at 0x02008000, end = 0x027c3100
  'reserved-memory' dma-unusable@fe000000: addr=fe000000 size=1000000
  'reserved-memory' ramoops@00000000: addr=8000000 size=f0000
   Using Device Tree in place at 08300000, end 08316323
Adding bank: 0x00000000 - 0x08400000 (size: 0x08400000)
Adding bank: 0x09310000 - 0x80000000 (size: 0x76cf0000)
Total: 698.792 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Linux version 4.19.232 (liuyuan@boardcon) (gcc version 10.3.1 20210621 (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)), GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Mon Jul 31 20:10:06 CST 2023
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: rockchip,rk3288w
[    0.000000] earlycon: uart8250 at MMIO32 0xff690000 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x00000000, size 0 MiB
[    0.000000] cma: Reserved 16 MiB at 0x7f000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv65535.65535 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 17 pages/cpu s37912 r8192 d23528 u69632
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 519392
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange androidboot.serialno=c3d9b8674f4b94f6  rw rootwait earlycon=uart8250,mmio32,0xff690000 vmalloc=496M root=PARTUUID=614e0000-0000 rootfstype=ext4
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 2018528K/2081728K available (12288K kernel code, 927K rwdata, 3388K rodata, 1024K init, 484K bss, 46816K reserved, 16384K cma-reserved, 1548288K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe1000000 - 0xff800000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0800000   ( 520 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0d00000   (13280 kB)
[    0.000000]       .init : 0xc1200000 - 0xc1300000   (1024 kB)
[    0.000000]       .data : 0xc1300000 - 0xc13e7d40   ( 928 kB)
[    0.000000]        .bss : 0xc13e7d40 - 0xc14610c0   ( 485 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 45604 entries in 179 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: random: get_random_bytes called from start_kernel+0x318/0x540 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008800] Switching to timer-based delay loop, resolution 41ns
[    0.016835] Console: colour dummy device 80x30
[    0.021722] console [tty0] enabled
[    0.025467] bootconsole [uart8250] disabled
[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Linux version 4.19.232 (liuyuan@boardcon) (gcc version 10.3.1 20210621 (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)), GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Mon Jul 31 20:10:06 CST 2023
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: rockchip,rk3288w
[    0.000000] earlycon: uart8250 at MMIO32 0xff690000 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x00000000, size 0 MiB
[    0.000000] cma: Reserved 16 MiB at 0x7f000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv65535.65535 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 17 pages/cpu s37912 r8192 d23528 u69632
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 519392
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange androidboot.serialno=c3d9b8674f4b94f6  rw rootwait earlycon=uart8250,mmio32,0xff690000 vmalloc=496M root=PARTUUID=614e0000-0000 rootfstype=ext4
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 2018528K/2081728K available (12288K kernel code, 927K rwdata, 3388K rodata, 1024K init, 484K bss, 46816K reserved, 16384K cma-reserved, 1548288K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe1000000 - 0xff800000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0800000   ( 520 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0d00000   (13280 kB)
[    0.000000]       .init : 0xc1200000 - 0xc1300000   (1024 kB)
[    0.000000]       .data : 0xc1300000 - 0xc13e7d40   ( 928 kB)
[    0.000000]        .bss : 0xc13e7d40 - 0xc14610c0   ( 485 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 45604 entries in 179 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: random: get_random_bytes called from start_kernel+0x318/0x540 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008800] Switching to timer-based delay loop, resolution 41ns
[    0.016835] Console: colour dummy device 80x30
[    0.021722] console [tty0] enabled
[    0.025467] bootconsole [uart8250] disabled
[    0.030142] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.030191] pid_max: default: 32768 minimum: 301
[    0.030362] Security Framework initialized
[    0.030393] Yama: becoming mindful.
[    0.030497] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.030536] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.031488] CPU: Testing write buffer coherency: ok
[    0.031556] CPU0: Spectre v2: using BPIALL workaround
[    0.032046] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.033233] Setting up static identity map for 0x100000 - 0x100060
[    0.033550] rcu: Hierarchical SRCU implementation.
[    0.034563] smp: Bringing up secondary CPUs ...
[    0.035878] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.035890] CPU1: Spectre v2: using BPIALL workaround
[    0.037452] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.037463] CPU2: Spectre v2: using BPIALL workaround
[    0.039003] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.039014] CPU3: Spectre v2: using BPIALL workaround
[    0.039311] smp: Brought up 1 node, 4 CPUs
[    0.039348] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.039375] CPU: All CPU(s) started in SVC mode.
[    0.041580] devtmpfs: initialized
[    0.063879] Trying to unpack rootfs image as initramfs...
[    0.066743] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    0.067185] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.067250] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.068291] pinctrl core: initialized pinctrl subsystem
[    0.069797] NET: Registered protocol family 16
[    0.073650] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.076587] cpuidle: using governor menu
[    0.076650] Registered FIQ tty driver
[    0.077788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.077838] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.117782] rockchip-gpio ff750000.gpio0: probed gpio0 (ff750000.gpio0)
[    0.118886] rockchip-gpio ff780000.gpio1: probed gpio1 (ff780000.gpio1)
[    0.119954] rockchip-gpio ff790000.gpio2: probed gpio2 (ff790000.gpio2)
[    0.121066] rockchip-gpio ff7a0000.gpio3: probed gpio3 (ff7a0000.gpio3)
[    0.122156] rockchip-gpio ff7b0000.gpio4: probed gpio4 (ff7b0000.gpio4)
[    0.123284] rockchip-gpio ff7c0000.gpio5: probed gpio5 (ff7c0000.gpio5)
[    0.124365] rockchip-gpio ff7d0000.gpio6: probed gpio6 (ff7d0000.gpio6)
[    0.125458] rockchip-gpio ff7e0000.gpio7: probed gpio7 (ff7e0000.gpio7)
[    0.126608] rockchip-gpio ff7f0000.gpio8: probed gpio8 (ff7f0000.gpio8)
[    0.126786] rockchip-pinctrl pinctrl: probed pinctrl
[    0.150663] fiq debugger fiq mode enabled
[    0.729061] console [ttyFIQ0] enabled
[    0.733124] Registered fiq debugger ttyFIQ0
[    0.742151] vcc_sd: regulator get failed, ret=-517
[    0.747779] vcc_lcd: regulator get failed, ret=-517
[    0.753367] vcc_wl: regulator get failed, ret=-517
[    0.759178] rk_iommu ff930300.iommu: version = 1
[    0.764564] rk_iommu ff940300.iommu: version = 1
[    0.769916] rk_iommu ff9a0800.iommu: version = 1
[    0.775291] rk_iommu ff9c0440.iommu: version = 1
[    0.781458] SCSI subsystem initialized
[    0.785589] usbcore: registered new interface driver usbfs
[    0.791258] usbcore: registered new interface driver hub
[    0.796670] usbcore: registered new device driver usb
[    0.801937] media: Linux media interface: v0.10
[    0.806562] videodev: Linux video capture interface: v2.00
[    0.812252] pps_core: LinuxPPS API ver. 1 registered
[    0.817242] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.826481] PTP clock support registered
[    0.832762] Advanced Linux Sound Architecture Driver Initialized.
[    0.839792] Bluetooth: Core ver 2.22
[    0.843474] NET: Registered protocol family 31
[    0.847944] Bluetooth: HCI device and connection manager initialized
[    0.854383] Bluetooth: HCI socket layer initialized
[    0.859294] Bluetooth: L2CAP socket layer initialized
[    0.864478] Bluetooth: SCO socket layer initialized
[    0.871840] clocksource: Switched to clocksource arch_sys_counter
[    0.971433] Freeing initrd memory: 8720K
[    0.987273] NET: Registered protocol family 2
[    0.991923] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
[    0.999606] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 6144 bytes)
[    1.007400] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    1.014571] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[    1.021170] TCP: Hash tables configured (established 4096 bind 4096)
[    1.027734] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    1.033766] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    1.040425] NET: Registered protocol family 1
[    1.045743] RPC: Registered named UNIX socket transport module.
[    1.051709] RPC: Registered udp transport module.
[    1.056498] RPC: Registered tcp transport module.
[    1.061237] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.070079] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
[    1.081429] Initialise system trusted keyrings
[    1.086194] workingset: timestamp_bits=29 max_order=19 bucket_order=0
[    1.103650] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.112237] NFS: Registering the id_resolver key type
[    1.117346] Key type id_resolver registered
[    1.121558] Key type id_legacy registered
[    1.125653] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.133194] fuse init (API version 7.27)
[    1.140255] NET: Registered protocol family 38
[    1.144819] Key type asymmetric registered
[    1.148946] Asymmetric key parser 'x509' registered
[    1.153979] bounce: pool size: 64 pages
[    1.157904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.165380] io scheduler noop registered
[    1.169336] io scheduler deadline registered
[    1.173730] io scheduler cfq registered (default)
[    1.178472] io scheduler mq-deadline registered
[    1.183065] io scheduler kyber registered
[    1.187341] io scheduler bfq registered
[    1.202633] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[    1.211232] pwm-backlight backlight: Linked as a consumer to regulator.0
[    1.218617] mpp_service mpp-srv: ddc1c24c52b5 author: Herman Chen 2022-11-16 video: rockchip: mpp: Fix mpp_dev_release crash
[    1.229926] mpp_service mpp-srv: probe start
[    1.235413] iommu: Adding device ff9c0000.hevc_service to group 3
[    1.241586] mpp_rkvdec ff9c0000.hevc_service: Linked as a consumer to ff9c0440.iommu
[    1.249776] mpp_rkvdec ff9c0000.hevc_service: probing start
[    1.255897] rkvdec_init:1222: failed on clk_get clk_hevc_cabac
[    1.261779] mpp_rkvdec ff9c0000.hevc_service: shared_video_a is not found!
[    1.268745] rkvdec_init:1235: No aclk reset resource define
[    1.274388] mpp_rkvdec ff9c0000.hevc_service: shared_video_h is not found!
[    1.281289] rkvdec_init:1238: No hclk reset resource define
[    1.286927] mpp_rkvdec ff9c0000.hevc_service: shared_niu_a is not found!
[    1.293685] rkvdec_init:1241: No niu aclk reset resource define
[    1.299638] mpp_rkvdec ff9c0000.hevc_service: shared_niu_h is not found!
[    1.306393] rkvdec_init:1244: No niu hclk reset resource define
[    1.312406] mpp_rkvdec ff9c0000.hevc_service: shared_video_cabac is not found!
[    1.319661] rkvdec_init:1250: No cabac reset resource define
[    1.325382] mpp_rkvdec ff9c0000.hevc_service: shared_video_hevc_cabac is not found!
[    1.333101] rkvdec_init:1253: No hevc cabac reset resource define
[    1.339538] mpp_rkvdec ff9c0000.hevc_service: probing finish
[    1.346033] iommu: Adding device ff9a0400.vdpu to group 2
[    1.351492] mpp_vdpu1 ff9a0400.vdpu: Linked as a consumer to ff9a0800.iommu
[    1.358835] mpp_vdpu1 ff9a0400.vdpu: probe device
[    1.364083] mpp_vdpu1 ff9a0400.vdpu: reset_group->rw_sem_on=0
[    1.369880] mpp_vdpu1 ff9a0400.vdpu: reset_group->rw_sem_on=0
[    1.376013] mpp_vdpu1 ff9a0400.vdpu: probing finish
[    1.381625] iommu: Adding device ff9a0000.vepu to group 2
[    1.387142] mpp_vepu1 ff9a0000.vepu: Linked as a consumer to ff9a0800.iommu
[    1.394349] mpp_vepu1 ff9a0000.vepu: probe device
[    1.399512] mpp_vepu1 ff9a0000.vepu: reset_group->rw_sem_on=0
[    1.405350] mpp_vepu1 ff9a0000.vepu: reset_group->rw_sem_on=0
[    1.411513] mpp_vepu1 ff9a0000.vepu: probing finish
[    1.417491] mpp_service mpp-srv: probe success
[    1.426700] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.434375] dma-pl330 ff250000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.444962] dma-pl330 ff600000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.452637] dma-pl330 ff600000.dma-controller:       DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    1.462859] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    1.471353] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    1.478823] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
[    1.488679] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 39, base_baud = 1500000) is a 16550A
[    1.498436] rockchip-pinctrl pinctrl: pin gpio7-8 already requested by vcc-3g-regulator; cannot claim for ff1b0000.serial
[    1.509489] rockchip-pinctrl pinctrl: pin-224 (ff1b0000.serial) status -22
[    1.516436] rockchip-pinctrl pinctrl: could not request pin 224 (gpio7-8) from group uart3-xfer  on device rockchip-pinctrl
[    1.527656] dw-apb-uart ff1b0000.serial: Error applying setting, reverse things back
[    1.535488] dw-apb-uart: probe of ff1b0000.serial failed with error -22
[    1.542555] ff1c0000.serial: ttyS4 at MMIO 0xff1c0000 (irq = 41, base_baud = 1500000) is a 16550A
[    1.554374] iommu: Adding device ff930000.vop to group 0
[    1.559751] rockchip-vop ff930000.vop: Linked as a consumer to ff930300.iommu
[    1.567367] iommu: Adding device ff940000.vop to group 1
[    1.572798] rockchip-vop ff940000.vop: Linked as a consumer to ff940300.iommu
[    1.587030] rockchip-drm display-subsystem: Linked as a consumer to ff930000.vop
[    1.594550] rockchip-drm display-subsystem: Linked as a consumer to ff940000.vop
[    1.603410] rockchip-drm display-subsystem: Linked as a consumer to ff970000.edp
[    1.611465] rockchip-drm display-subsystem: Linked as a consumer to ff980000.hdmi
[    1.628004] midgard ffa30000.gpu: Failed to get regulator
[    1.633487] midgard ffa30000.gpu: Power control initialization failed
[    1.641770] brd: module loaded
[    1.658016] loop: module loaded
[    1.662147] zram: Added device: zram0
[    1.667865] tun: Universal TUN/TAP device driver, 1.6
[    1.674816] clk: failed to reparent mac_clk to npll: -22
[    1.680417] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock
[    1.686690] rk_gmac-dwmac ff290000.ethernet: Linked as a consumer to regulator.4
[    1.694186] rk_gmac-dwmac ff290000.ethernet: clock input or output? (output).
[    1.701361] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30).
[    1.707077] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10).
[    1.712801] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no).
[    1.719080] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed
[    1.726361] rk_gmac-dwmac ff290000.ethernet: init for RGMII
[    1.732342] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    1.739525] rk_gmac-dwmac ff290000.ethernet:         DWMAC1000
[    1.744841] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported
[    1.752385] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported
[    1.759896] rk_gmac-dwmac ff290000.ethernet: COE Type 2
[    1.765174] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported
[    1.772270] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported
[    1.778787] rk_gmac-dwmac ff290000.ethernet: Normal descriptors
[    1.784777] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled
[    1.790642] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.913270] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    1.922847] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    1.934564] PPP generic driver version 2.4.2
[    1.939513] usbcore: registered new interface driver rt2800usb
[    1.945529] usbcore: registered new interface driver rndis_wlan
[    1.951481] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.959019] usbcore: registered new interface driver pegasus
[    1.964814] usbcore: registered new interface driver rtl8150
[    1.970572] usbcore: registered new interface driver r8152
[    1.976217] usbcore: registered new interface driver asix
[    1.981708] usbcore: registered new interface driver ax88179_178a
[    1.987937] usbcore: registered new interface driver cdc_ether
[    1.993910] usbcore: registered new interface driver dm9601
[    1.999592] usbcore: registered new interface driver smsc75xx
[    2.005481] usbcore: registered new interface driver smsc95xx
[    2.011331] usbcore: registered new interface driver net1080
[    2.017129] usbcore: registered new interface driver rndis_host
[    2.023207] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    2.030725] usbcore: registered new interface driver cdc_ncm
[    2.036520] usbcore: registered new interface driver cdc_mbim
[    2.042784] dwc2 ff540000.usb: ff540000.usb supply vusb_d not found, using dummy regulator
[    2.051178] dwc2 ff540000.usb: Linked as a consumer to regulator.0
[    2.057449] dwc2 ff540000.usb: ff540000.usb supply vusb_a not found, using dummy regulator
[    2.131949] dwc2 ff540000.usb: dwc2_check_params: Invalid parameter lpm_clock_gating=1
[    2.139902] dwc2 ff540000.usb: dwc2_check_params: Invalid parameter besl=1
[    2.146863] dwc2 ff540000.usb: dwc2_check_params: Invalid parameter hird_threshold_en=1
[    2.155549] dwc2 ff540000.usb: DWC OTG Controller
[    2.160323] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
[    2.167501] dwc2 ff540000.usb: irq 47, io mem 0xff540000
[    2.173358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    2.181661] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.188959] usb usb1: Product: DWC OTG Controller
[    2.193724] usb usb1: Manufacturer: Linux 4.19.232 dwc2_hsotg
[    2.199492] usb usb1: SerialNumber: ff540000.usb
[    2.205132] hub 1-0:1.0: USB hub found
[    2.208995] hub 1-0:1.0: 1 port detected
[    2.214074] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
[    2.222536] dwc2 ff580000.usb: Linked as a consumer to regulator.0
[    2.228766] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
[    2.371933] dwc2 ff580000.usb: dwc2_check_params: Invalid parameter lpm_clock_gating=1
[    2.379889] dwc2 ff580000.usb: dwc2_check_params: Invalid parameter besl=1
[    2.386846] dwc2 ff580000.usb: dwc2_check_params: Invalid parameter hird_threshold_en=1
[    2.394949] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
[    2.402362] dwc2 ff580000.usb: DWC OTG Controller
[    2.407134] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2
[    2.414427] dwc2 ff580000.usb: irq 48, io mem 0xff580000
[    2.420121] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    2.428472] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.435764] usb usb2: Product: DWC OTG Controller
[    2.440497] usb usb2: Manufacturer: Linux 4.19.232 dwc2_hsotg
[    2.446299] usb usb2: SerialNumber: ff580000.usb
[    2.451925] hub 2-0:1.0: USB hub found
[    2.455794] hub 2-0:1.0: 1 port detected
[    2.463278] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.469848] ehci-platform: EHCI generic platform driver
[    2.475780] ehci-platform ff500000.usb: EHCI Host Controller
[    2.481873] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3
[    2.490008] ehci-platform ff500000.usb: irq 45, io mem 0xff500000
[    2.561941] usb 1-1: new high-speed USB device number 2 using dwc2
[    2.591908] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00
[    2.598528] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    2.606888] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.614211] usb usb3: Product: EHCI Host Controller
[    2.619115] usb usb3: Manufacturer: Linux 4.19.232 ehci_hcd
[    2.624753] usb usb3: SerialNumber: ff500000.usb
[    2.630320] hub 3-0:1.0: USB hub found
[    2.634253] hub 3-0:1.0: 1 port detected
[    2.639379] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.645673] ohci-platform: OHCI generic platform driver
[    2.651253] ohci-platform ff520000.usb: Generic Platform OHCI controller
[    2.658370] ohci-platform ff520000.usb: new USB bus registered, assigned bus number 4
[    2.666843] ohci-platform ff520000.usb: irq 46, io mem 0xff520000
[    2.721984] phy phy-ff770000.syscon:usbphy.1: charger = USB_SDP_CHARGER
[    2.746424] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    2.754786] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.762083] usb usb4: Product: Generic Platform OHCI controller
[    2.768032] usb usb4: Manufacturer: Linux 4.19.232 ohci_hcd
[    2.773688] usb usb4: SerialNumber: ff520000.usb
[    2.779385] hub 4-0:1.0: USB hub found
[    2.783318] hub 4-0:1.0: 1 port detected
[    2.788817] usbcore: registered new interface driver cdc_acm
[    2.794574] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.802846] usbcore: registered new interface driver cdc_wdm
[    2.809045] usbcore: registered new interface driver usb-storage
[    2.815351] usbcore: registered new interface driver usbserial_generic
[    2.822052] usbserial: USB Serial support registered for generic
[    2.828181] usbcore: registered new interface driver cp210x
[    2.833893] usbserial: USB Serial support registered for cp210x
[    2.839976] usbcore: registered new interface driver ftdi_sio
[    2.842846] usb 1-1: New USB device found, idVendor=152d, idProduct=2329, bcdDevice= 1.00
[    2.845830] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.854037] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    2.861599] usbcore: registered new interface driver keyspan
[    2.868549] usb 1-1: Product: USB to ATA/ATAPI bridge
[    2.874299] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    2.879324] usb 1-1: Manufacturer: JMicron
[    2.887251] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    2.891313] usb 1-1: SerialNumber: 801130168383
[    2.898731] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    2.904824] usb-storage 1-1:1.0: USB Mass Storage device detected
[    2.910620] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    2.917273] usb-storage 1-1:1.0: Quirks match for vid 152d pid 2329: 8020
[    2.924209] usbcore: registered new interface driver option
[    2.931123] scsi host0: usb-storage 1-1:1.0
[    2.936613] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.948217] usbcore: registered new interface driver oti6858
[    2.953992] usbserial: USB Serial support registered for oti6858
[    2.960131] usbcore: registered new interface driver pl2303
[    2.965821] usbserial: USB Serial support registered for pl2303
[    2.971919] usb 3-1: new high-speed USB device number 2 using ehci-platform
[    2.971936] usbcore: registered new interface driver qcserial
[    2.984760] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.991939] usbcore: registered new interface driver sierra
[    2.997583] usbserial: USB Serial support registered for Sierra USB modem
[    3.006132] usbcore: registered new interface driver iforce
[    3.011938] usbcore: registered new interface driver xpad
[    3.017966] usbcore: registered new interface driver usbtouchscreen
[    3.025801] i2c /dev entries driver
[    3.031087] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    3.038259] vdd_cpu: No configuration
[    3.042020] vdd_cpu: supplied by vcc_sys
[    3.046242] vdd_cpu: No configuration
[    3.052058] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    3.059166] vdd_gpu: No configuration
[    3.062917] vdd_gpu: supplied by vcc_sys
[    3.067154] vdd_gpu: No configuration
[    3.073693] rtc-hym8563 0-0051: rtc information is valid
[    3.081183] rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0
[    3.088009] rtc-hym8563 0-0051: setting system clock to 2017-01-01 12:50:35 UTC (1483275035)
[    3.098607] VCC_DDR: supplied by vcc_sys
[    3.104133] VCC_IO: supplied by vcc_sys
[    3.109477] VDD_LOG: supplied by vcc_sys
[    3.115130] VCC_20: supplied by vcc_sys
[    3.120523] VCCIO_SD: supplied by VCC_IO
[    3.126484] VDD10_LCD: supplied by VCC_IO
[    3.132392] VCCA_CODEC: supplied by VCC_IO
[    3.138333] VCCA_TP: supplied by vcc_sys
[    3.143825] VCCIO_PMU: supplied by vcc_sys
[    3.149445] VDD_10: supplied by VCC_20
[    3.155107] VCC_18: supplied by VCC_20
[    3.160705] VCC18_LCD: supplied by VCC_20
[    3.166511] i2c i2c-0: of_i2c: invalid reg on /i2c@ff650000/sdio-pwrseq
[    3.171965] random: fast init done
[    3.173210] i2c i2c-0: Failed to create I2C device for /i2c@ff650000/sdio-pwrseq
[    3.177262] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    3.192324] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.199493] usb 3-1: Product: USB 2.0 Hub
[    3.204676] hub 3-1:1.0: USB hub found
[    3.208774] hub 3-1:1.0: 4 ports detected
[    3.213369] input: gsl3673 as /devices/platform/ff160000.i2c/i2c-4/4-0040/input/input0
[    3.351975] gsl3673 4-0040: GSL3673 test_i2c error!
[    3.356887] gsl3673 4-0040: gsl_probe: init_chip failed
[    3.362888] gsl3673: probe of 4-0040 failed with error -1
[    3.368626] rockchip-pinctrl pinctrl: pin gpio7-19 already requested by ff980000.hdmi; cannot claim for ff170000.i2c
[    3.379240] rockchip-pinctrl pinctrl: pin-235 (ff170000.i2c) status -22
[    3.385916] rockchip-pinctrl pinctrl: could not request pin 235 (gpio7-19) from group i2c5-xfer  on device rockchip-pinctrl
[    3.397104] rk3x-i2c ff170000.i2c: Error applying setting, reverse things back
[    3.404403] rk3x-i2c: probe of ff170000.i2c failed with error -22
[    3.415144] usbcore: registered new interface driver uvcvideo
[    3.420917] USB Video Class driver (1.1.1)
[    3.425809] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.22
[    3.434922] rockchip-iodomain ff770000.syscon:io-domains: wifi(1800000 uV) supplied by VCC_18
[    3.443928] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.16
[    3.453025] rockchip-iodomain ff770000.syscon:io-domains: sdcard(3300000 uV) supplied by VCCIO_SD
[    3.464230] rockchip-thermal ff280000.tsadc: Missing rockchip,grf property
[    3.471604] rockchip-thermal ff280000.tsadc: tsadc is probed successfully!
[    3.479612] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    3.488910] Bluetooth: HCI UART driver ver 2.3
[    3.493437] Bluetooth: HCI UART protocol H4 registered
[    3.498603] Bluetooth: HCI UART protocol ATH3K registered
[    3.504176] usbcore: registered new interface driver bfusb
[    3.509811] usbcore: registered new interface driver btusb
[    3.515755] cpu cpu0: bin=1
[    3.518706] cpu cpu0: leakage=21
[    3.522345] cpu cpu0: Linked as a consumer to regulator.10
[    3.540410] cpu cpu0: temp=43181, pvtm=15812 (15956 + -144)
[    3.546131] rockchip_cpuclk_pre_rate_change: Invalid rate : 500000000 for cpuclk
[    3.553708] cpu cpu0: Dropping the link to regulator.10
[    3.559033] cpu cpu0: pvtm-volt-sel=1
[    3.562805] cpu cpu0: bin-scale=25
[    3.566863] cpu cpu0: Linked as a consumer to regulator.10
[    3.572580] cpu cpu0: Dropping the link to regulator.10
[    3.578310] cpu cpu0: Linked as a consumer to regulator.10
[    3.586052] cpu cpu0: avs=0
[    3.589002] cpu cpu0: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[    3.597037] cpu cpu0: failed to read out thermal zone (-22)
[    3.604268] cpu cpu0: failed to find power_model node
[    3.610296] sdhci: Secure Digital Host Controller Interface driver
[    3.616625] sdhci: Copyright(c) Pierre Ossman
[    3.621000] Synopsys Designware Multimedia Card Interface Driver
[    3.627736] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
[    3.635016] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
[    3.641822] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
[    3.647601] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
[    3.657371] vcc_sd: supplied by VCC_IO
[    3.661307] dwmmc_rockchip ff0c0000.dwmmc: Linked as a consumer to regulator.7
[    3.668714] dwmmc_rockchip ff0c0000.dwmmc: Linked as a consumer to regulator.16
[    3.805803] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.827979] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
[    3.835266] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
[    3.842065] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
[    3.847842] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
[    3.857990] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode.
[    3.865279] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller.
[    3.872078] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a
[    3.877846] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
[    3.887646] mmc_host mmc1: card is non-removable.
[    3.904994] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.926978] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.933130] cryptodev: driver 1.12 loaded.
[    3.937286] hidraw: raw HID events driver (C) Jiri Kosina
[    3.943183] usbcore: registered new interface driver usbhid
[    3.948770] usbhid: USB HID core driver
[    3.949600] scsi 0:0:0:0: Direct-Access                                    PQ: 0 ANSI: 2 CCS
[    3.952838] ashmem: initialized
[    3.964769] rockchip-saradc ff100000.saradc: Linked as a consumer to regulator.1
[    3.972742] optee: probing for conduit method from DT.
[    3.977906] optee: revision 1.1
[    3.978129] optee: initialized driver
[    3.984967] rknandbase v1.2 2021-01-07
[    3.989163] usbcore: registered new interface driver snd-usb-audio
[    3.996261] rt5640 2-001c: Device with ID register 0xdf175d5c is not rt5640/39
[    4.005010] u32 classifier
[    4.008037] IPVS: Registered protocols ()
[    4.012094] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[    4.019509] IPVS: ipvs loaded.
[    4.022839] Initializing XFRM netlink socket
[    4.027461] NET: Registered protocol family 10
[    4.028374] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=0x08
[    4.032612] mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req 52000000Hz, actual 49500000HZ div = 0)
[    4.040475] sd 0:0:0:0: [sda] Sense Key : 0x6 [current]
[    4.042138] Segment Routing with IPv6
[    4.042291] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    4.042603] NET: Registered protocol family 17
[    4.042614] NET: Registered protocol family 15
[    4.042645] Bridge firewalling registered
[    4.042725] Bluetooth: RFCOMM socket layer initialized
[    4.042744] Bluetooth: RFCOMM ver 1.11
[    4.042751] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.042761] Bluetooth: HIDP socket layer initialized
[    4.042783] 8021q: 802.1Q VLAN Support v1.8
[    4.042795] lib80211: common routines for IEEE802.11 drivers
[    4.042806] [BT_RFKILL]: Enter rfkill_rk_init
[    4.042807] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    4.042977] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    4.042999] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6335
[    4.043002] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    4.043004] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    4.043030] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 150, flags = 0.
[    4.043034] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    4.043036] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    4.043040] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[    4.043042] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    4.043302] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 139.
[    4.043317] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 149.
[    4.043325] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 146.
[    4.043333] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 151.
[    4.043337] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
[    4.043369] [BT_RFKILL]: Request irq for bt wakeup host
[    4.043416] [BT_RFKILL]: BT_WAKE_HOST IRQ fired
[    4.043440] [BT_RFKILL]: ** disable irq
[    4.043513] [BT_RFKILL]: bt_default device registered.
[    4.043588] Key type dns_resolver registered
[    4.043989] ThumbEE CPU extension supported.
[    4.043996] Registering SWP/SWPB emulation handler
[    4.050448] mmc1: new high speed MMC card at address 0001
[    4.055563] sd 0:0:0:0: [sda] ASC=0x28 ASCQ=0x0
[    4.055878] Loading compiled-in X.509 certificates
[    4.056090] rga2: Module initialized.
[    4.060186] mmcblk1: mmc1:0001 8GME4R 7.28 GiB
[    4.065209] sd 0:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[    4.067322] vcc_lcd: supplied by VCC_IO
[    4.067543] panel-simple panel: Linked as a consumer to regulator.8
[    4.067571] panel-simple panel: panel supply vsp not found, using dummy regulator
[    4.067598] panel-simple panel: Linked as a consumer to regulator.0
[    4.067612] panel-simple panel: panel supply vsn not found, using dummy regulator
[    4.068088] midgard ffa30000.gpu: Linked as a consumer to regulator.11
[    4.068137] midgard ffa30000.gpu: bin=0
[    4.068144] midgard ffa30000.gpu: Failed to get gpu_leakage
[    4.068155] midgard ffa30000.gpu: bin-scale=55
[    4.068371] midgard ffa30000.gpu: avs=0
[    4.068399] W : [File] : drivers/gpu/arm/midgard/platform/rk/mali_kbase_config_rk.c; [Line] : 114; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    4.068581] midgard ffa30000.gpu: GPU identified as 0x0750 r1p0 status 0
[    4.068641] midgard ffa30000.gpu: Protected mode not available
[    4.068802] midgard ffa30000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[    4.068826] midgard ffa30000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[    4.068901] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 417; [Func] : midgard_kbase_devfreq_init(); success initing power_model_simple.
[    4.069232] midgard ffa30000.gpu: Probed as mali0
[    4.069493] input: adc-keys as /devices/platform/adc-keys/input/input1
[    4.070280] mmcblk1boot0: mmc1:0001 8GME4R partition 1 4.00 MiB
[    4.070378] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
[    4.074130] sd 0:0:0:0: [sda] 0-byte physical blocks
[    4.078824] mmcblk1boot1: mmc1:0001 8GME4R partition 2 4.00 MiB
[    4.092561] devfreq ffa30000.gpu: Couldn't update frequency transition information.
[    4.093143] mmcblk1rpmb: mmc1:0001 8GME4R partition 3 512 KiB, chardev (240:0)
[    4.098002] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
[    4.135842] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
[    4.143208] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
[    4.222848] sd 0:0:0:0: [sda] Asking for cache data failed
[    4.226700] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
[    4.231818] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    4.236654] rockchip-drm display-subsystem: devfreq is not set
[    4.489660] rockchip-vop ff930000.vop: missing rockchip,grf property
[    4.496167] rockchip-drm display-subsystem: bound ff930000.vop (ops 0xc0d6ca8c)
[    4.503590] rockchip-vop ff940000.vop: missing rockchip,grf property
[    4.509988] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=0x08
[    4.510074] rockchip-drm display-subsystem: bound ff940000.vop (ops 0xc0d6ca8c)
[    4.518539] sd 0:0:0:0: [sda] Sense Key : 0x6 [current]
[    4.518543] sd 0:0:0:0: [sda] ASC=0x28 ASCQ=0x0
[    4.525894] rockchip-dp ff970000.edp: no DP phy configured
[    4.541704] rockchip-drm display-subsystem: bound ff970000.edp (ops 0xc0d72244)
[    4.549240] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY)
[    4.559669] dwhdmi-rockchip ff980000.hdmi: registered DesignWare HDMI I2C bus driver
[    4.567590] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.568544] rockchip-drm display-subsystem: bound ff980000.hdmi (ops 0xc0d72d40)
[    4.579664] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.586300] [drm] No driver support for vblank timestamp query.
[    4.592340] rockchip-drm display-subsystem: failed to parse loader memory
[    4.601017]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
[    4.619757] vendor storage:20190527 ret = 0

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712

解决二：
进入内核后，卡在这里，是因为没有正确配置显示屏的原因吧。我选择把 edp 相关的配置全部删除，因为我将要使用的是 lvds 显示。

\rk3288_linux4.19\kernel\arch\arm\boot\dts\rk3288-evb-act8846.dts

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;
#include "rk3288-evb.dtsi"
#include "rk3288-linux.dtsi"
/ {
	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";

/*	panel {
		compatible = "simple-panel";
		backlight = <&backlight>;
		power-supply = <&vcc_lcd>;
		enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
		prepare-delay-ms = <120>;

		display-timings {
			native-mode = <&timing0>;

			timing0: timing0 {
				clock-frequency = <200000000>;
				hactive = <1536>;
				vactive = <2048>;
				hfront-porch = <12>;
				hsync-len = <16>;
				hback-porch = <48>;
				vfront-porch = <8>;
				vsync-len = <4>;
				vback-porch = <8>;
				hsync-active = <0>;
				vsync-active = <0>;
				de-active = <0>;
				pixelclk-active = <0>;
			};
		};

		port {
			panel_in_edp: endpoint {
				remote-endpoint = <&edp_out_panel>;
			};
		};
	}; */

	vcc_lcd: vcc-lcd {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&lcd_en>;
		regulator-name = "vcc_lcd";
		vin-supply = <&vcc_io>;
	};

	vcc_wl: vcc-wl {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_pwr>;
		regulator-name = "vcc_wl";
		vin-supply = <&vcc_18>;
	};
};

&backlight {
	enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&bl_en>;
	pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
};

&i2c0 {
	clock-frequency = <400000>;

	vdd_cpu: syr827@40 {
		compatible = "silergy,syr827";
		fcs,suspend-voltage-selector = <1>;
		reg = <0x40>;
		regulator-name = "vdd_cpu";
		regulator-min-microvolt = <850000>;
		regulator-max-microvolt = <1350000>;
		regulator-always-on;
		regulator-boot-on;
		vin-supply = <&vcc_sys>;
	};

	vdd_gpu: syr828@41 {
		compatible = "silergy,syr828";
		fcs,suspend-voltage-selector = <1>;
		reg = <0x41>;
		regulator-name = "vdd_gpu";
		regulator-min-microvolt = <850000>;
		regulator-max-microvolt = <1350000>;
		regulator-always-on;
		vin-supply = <&vcc_sys>;
	};

	hym8563@51 {
		compatible = "haoyu,hym8563";
		reg = <0x51>;

		interrupt-parent = <&gpio0>;
		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;

		pinctrl-names = "default";
		pinctrl-0 = <&pmic_int>;

		#clock-cells = <0>;
		clock-output-names = "xin32k";
	};

	hym8563: hym8563@51 {
		compatible = "haoyu,hym8563";
		reg = <0x51>;

		interrupt-parent = <&gpio0>;
		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;

		pinctrl-names = "default";
		pinctrl-0 = <&pmic_int>;

		#clock-cells = <0>;
		clock-output-names = "xin32k";
	};

	act8846: act8846@5a {
		compatible = "active-semi,act8846";
		reg = <0x5a>;
		status = "okay";

		vp1-supply = <&vcc_sys>;
		vp2-supply = <&vcc_sys>;
		vp3-supply = <&vcc_sys>;
		vp4-supply = <&vcc_sys>;
		inl1-supply = <&vcc_io>;
		inl2-supply = <&vcc_sys>;
		inl3-supply = <&vcc_20>;

		regulators {
			vcc_ddr: REG1 {
				regulator-name = "VCC_DDR";
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				regulator-always-on;
			};

			vcc_io: REG2 {
				regulator-name = "VCC_IO";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vdd_log: REG3 {
				regulator-name = "VDD_LOG";
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1500000>;
				regulator-always-on;
			};

			vcc_20: REG4 {
				regulator-name = "VCC_20";
				regulator-min-microvolt = <2000000>;
				regulator-max-microvolt = <2000000>;
				regulator-always-on;
			};

			vccio_sd: REG5 {
				regulator-name = "VCCIO_SD";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vdd10_lcd: REG6 {
				regulator-name = "VDD10_LCD";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			vcca_codec: REG7 {
				regulator-name = "VCCA_CODEC";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vcc_tp: REG8 {
				regulator-name = "VCCA_TP";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vccio_pmu: REG9 {
				regulator-name = "VCCIO_PMU";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vdd_10: REG10 {
				regulator-name = "VDD_10";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			vcc_18: REG11 {
				regulator-name = "VCC_18";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			vcc18_lcd: REG12 {
				regulator-name = "VCC18_LCD";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};
		};
	};

	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		clocks = <&hym8563>;
		clock-names = "ext_clock";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_enable_h>;

		/*
		 * On the module itself this is one of these (depending
		 * on the actual card populated):
		 * - SDIO_RESET_L_WL_REG_ON
		 * - PDN (power down when low)
		 */
		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
	};
};

/*
&edp {
	force-hpd;
	status = "okay";

	ports {
		port@1 {
			reg = <1>;

			edp_out_panel: endpoint {
				remote-endpoint = <&panel_in_edp>;
			};
		};
	};
};

&edp_in_vopb {
	status = "disabled";
};

&edp_in_vopl {
	status = "okay";
};  */

&pwm0 {
	status = "okay";
};

&pinctrl {
	backlight {
		bl_en: bl-en {
			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	lcd {
		lcd_en: lcd-en  {
			rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	wifi {
		wifi_pwr: wifi-pwr {
			rockchip,pins = <7 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294

此时，系统可以正常进入命令行了
1