mac 下使用brew安装mysql_mac 如何安装包的命令mysqlbinlog

步骤：

一、安装homebrew

二、安装mysql

三、配置自启动

四、修改mysql密码

五、创建my.cnf配置文件

一、安装homebrew

homebrew是macOS缺失的软件包管理器，譬如可以下载mysql、maven等等。

安装方法：

/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

将以上命令粘贴至终端。

homebrew更多详情请查看官网：  https://brew.sh/index_zh-cn.html

二、安装mysql

$ brew install mysql

三、配置自启动

$ mkdir -p ~/Library/LaunchAgents

$ ln -sfv /usr/local/opt/mysql/*.plist ~/Library/LaunchAgents

$ find /usr/local/Cellar/mysql/ -name "homebrew.mxcl.mysql.plist" -exec cp {} ~/Library/LaunchAgents/ \;

$ launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist

四、修改mysql密码

1.先启动mysql服务

$ mysql.server start

2.继续执行mysql_secure_installation

cometdeMacBook-Pro:~ comet$ mysql_secure_installation
 
Securing the MySQL server deployment.
 
Connecting to MySQL using a blank password.
 
VALIDATE PASSWORD PLUGIN can be used to test passwords
and improve security. It checks the strength of password
and allows the users to set only those passwords which are
secure enough. Would you like to setup VALIDATE PASSWORD plugin?
 
Press y|Y for Yes, any other key for No: N   // 这个选yes的话密码长度就必须要设置为8位以上，但我只想要6位的
Please set the password for root here.
 
New password:            // 设置密码
 
Re-enter new password:     // 再一次确认密码
By default, a MySQL installation has an anonymous user,
allowing anyone to log into MySQL without having to have
a user account created for them. This is intended only for
testing, and to make the installation go a bit smoother.
You should remove them before moving into a production
environment.
 
Remove anonymous users? (Press y|Y for Yes, any other key for No) : Y    // 移除不用密码的那个账户
Success.
 
 
Normally, root should only be allowed to connect from
'localhost'. This ensures that someone cannot guess at
the root password from the network.
 
Disallow root login remotely? (Press y|Y for Yes, any other key for No) : n
 
 ... skipping.
By default, MySQL comes with a database named 'test' that
anyone can access. This is also intended only for testing,
and should be removed before moving into a production
environment.
 
 
Remove test database and access to it? (Press y|Y for Yes, any other key for No) : y
 - Dropping test database...
Success.
 
 - Removing privileges on test database...
Success.
 
Reloading the privilege tables will ensure that all changes
made so far will take effect immediately.
 
Reload privilege tables now? (Press y|Y for Yes, any other key for No) : y
Success.
 
All done!

五、创建my.cnf配置文件

1.首先需要知道系统是按如下顺序去找my.cnf：

i.    /etc/my.cnf
ii.   /etc/mysql/my.cnf
iii.  /usr/local/etc/my.cnf
iv.  ~/.my.cnf

2.所以就在/etc下创建my.cnf

$ cd /etc

$ sudo vim my.cnf

配置文件内容如下：

# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# MySQL programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, see:
# http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
default-character-set=utf8
#password = your_password
port = 3306
socket = /tmp/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
character-set-server=utf8
init_connect='SET NAMES utf8
port = 3306
socket = /tmp/mysql.sock
skip-external-locking
key_buffer_size = 16M
max_allowed_packet = 1M
table_open_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
character-set-server=utf8
secure_file_priv=''
init_connect='SET NAMES utf8'
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking


# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin


# binary logging format - mixed recommended
binlog_format=mixed


# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1


# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin


# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /usr/local/mysql/data
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /usr/local/mysql/data
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50


[mysqldump]
quick
max_allowed_packet = 16M


[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
default-character-set=utf8


[myisamchk]
key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M


[mysqlhotcopy]
interactive-timeout

最后wq保存