stm32数码管显示数字流程图_STM32入门例程，驱动8位数码管显示“12345678”源程序...

作者：酷酷是懒虫 | 2024-06-24 09:42:07

踩

数码管连接stm32单片机控制要显示的数字

/*--------------------------------------

//GPIO define

//Design by :Tan/yicheng

//pctanyicheng@163.com

//www.u-easytech.com

//u-easytech@163.com

//重庆优易特电子

// COPYRIGHT:重庆优易特电子

//http://www.u-easytech.com/chinese/

//FUNCTION:用595完成八位数码管显示

-------------------------------------------------------------------------- */

#include /* STM32F10x Library Definitions */

#include "UET_GPIO.h"

//unsigned char seg[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e,0x8c,0xc1,0xce,0x91,0x89,0xc7,0xff};

unsigned char seg[]={

0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,

0x77,0x7c,0x39,0x5e,0x79,0x71,0x73,0x78,0x5c,0x54,

0x40,0x81,0x88,0x3e,0x70,0x00

} ;

//0,1,2,3,4,5,6,7,8,9,

//A,b,C,d,E,F,P,t,o,

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/酷酷是懒虫/article/detail/752322

stm32数码管显示数字 流程图_STM32入门例程，驱动8位数码管显示“12345678”源程序...