Unity导出exe报错，PC端_unity报错build completed with a result of 'failed' i

作者：小蓝xlanll | 2024-02-21 11:52:13

踩

unity报错build completed with a result of 'failed' in 2 seconds (1935 ms)

程序连接mysql数据库

导出到PC端时报下列错误：

错误一：

ArgumentException: The Assembly System.Configuration is referenced by System.Data. But the dll is not allowed to be included or could not be found.

错误二：

UnityEditor.BuildPlayerWindow+BuildMethodException: 3 errors

错误三：

Build completed with a result of ‘Failed’

解决方法：在Player Settings里将Api Capability Level里的.Net 2.0 Sub 改成.Net 2.0就行了。

位置：Edit—〉Project Settings—〉Player，打开面板后找到Api Capability Level

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/小蓝xlanll/article/detail/123534