ERROR: [Labtools 27-1832] create_wave_config not a supported tcl command in labtools hardware mode.

作者：IT小白 | 2024-05-04 08:51:24

踩

[labtools 27-1832] create_wave_config not a supported tcl command in labtool

平台：Vivado2018.3

在调试vivado在线debug过程中，发现无法显示波形。

报错如下。

ERROR: [Wavedata 42-472] WCFG parsing ERROR:
Fatal Error at file E:/githome/xxxx/hw_1/wave/hw_ila_data_1/hw_ila_data_1.wcfg, line 1, char 1
Message: invalid byte '?' at position 2 of a 3-byte sequence

ERROR: [Labtools 27-1832] create_wave_config not a supported tcl command in labtools hardware mode. Default wave configurations are automatically created when triggering an ILA core.

解决办法

Use below command in TCL.

display_hw_ila_data -reset

This error happen because of not proper saving og ila_data and retrying to recover it.

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/IT小白/article/detail/533666